case study consulting prep

47 case interview examples (from McKinsey, BCG, Bain, etc.)

One of the best ways to prepare for   case interviews  at firms like McKinsey, BCG, or Bain, is by studying case interview examples. 

There are a lot of free sample cases out there, but it's really hard to know where to start. So in this article, we have listed all the best free case examples available, in one place.

The below list of resources includes interactive case interview samples provided by consulting firms, video case interview demonstrations, case books, and materials developed by the team here at IGotAnOffer. Let's continue to the list.

• McKinsey examples
• BCG examples
• Bain examples
• Deloitte examples
• Other firms' examples
• Case books from consulting clubs
• Case interview preparation

Click here to practise 1-on-1 with MBB ex-interviewers

1. mckinsey case interview examples.

• Beautify case interview (McKinsey website)
• Diconsa case interview (McKinsey website)
• Electro-light case interview (McKinsey website)
• GlobaPharm case interview (McKinsey website)
• National Education case interview (McKinsey website)
• Talbot Trucks case interview (McKinsey website)
• Shops Corporation case interview (McKinsey website)
• Conservation Forever case interview (McKinsey website)
• McKinsey case interview guide (by IGotAnOffer)
• McKinsey live case interview extract (by IGotAnOffer) - See below

2. BCG case interview examples

• Foods Inc and GenCo case samples  (BCG website)
• Chateau Boomerang written case interview  (BCG website)
• BCG case interview guide (by IGotAnOffer)
• Written cases guide (by IGotAnOffer)
• BCG live case interview with notes (by IGotAnOffer)
• BCG mock case interview with ex-BCG associate director - Public sector case (by IGotAnOffer)
• BCG mock case interview: Revenue problem case (by IGotAnOffer) - See below

3. Bain case interview examples

• CoffeeCo practice case (Bain website)
• FashionCo practice case (Bain website)
• Associate Consultant mock interview video (Bain website)
• Consultant mock interview video (Bain website)
• Written case interview tips (Bain website)
• Bain case interview guide   (by IGotAnOffer)
• Digital transformation case with ex-Bain consultant
• Bain case mock interview with ex-Bain manager (below)

4. Deloitte case interview examples

• Engagement Strategy practice case (Deloitte website)
• Recreation Unlimited practice case (Deloitte website)
• Strategic Vision practice case (Deloitte website)
• Retail Strategy practice case  (Deloitte website)
• Finance Strategy practice case  (Deloitte website)
• Talent Management practice case (Deloitte website)
• Enterprise Resource Management practice case (Deloitte website)
• Footloose written case  (by Deloitte)
• Deloitte case interview guide (by IGotAnOffer)

5. Accenture case interview examples

• Case interview workbook (by Accenture)
• Accenture case interview guide (by IGotAnOffer)

6. OC&C case interview examples

• Leisure Club case example (by OC&C)
• Imported Spirits case example (by OC&C)

7. Oliver Wyman case interview examples

• Wumbleworld case sample (Oliver Wyman website)
• Aqualine case sample (Oliver Wyman website)
• Oliver Wyman case interview guide (by IGotAnOffer)

8. A.T. Kearney case interview examples

• Promotion planning case question (A.T. Kearney website)
• Consulting case book and examples (by A.T. Kearney)
• AT Kearney case interview guide (by IGotAnOffer)

9. Strategy& / PWC case interview examples

• Presentation overview with sample questions (by Strategy& / PWC)
• Strategy& / PWC case interview guide (by IGotAnOffer)

10. L.E.K. Consulting case interview examples

• Case interview example video walkthrough   (L.E.K. website)
• Market sizing case example video walkthrough  (L.E.K. website)

11. Roland Berger case interview examples

• Transit oriented development case webinar part 1  (Roland Berger website)
• Transit oriented development case webinar part 2   (Roland Berger website)
• 3D printed hip implants case webinar part 1   (Roland Berger website)
• 3D printed hip implants case webinar part 2   (Roland Berger website)
• Roland Berger case interview guide   (by IGotAnOffer)

12. Capital One case interview examples

• Case interview example video walkthrough  (Capital One website)
• Capital One case interview guide (by IGotAnOffer)

12. EY Parthenon case interview examples

• Candidate-led case example with feedback (by IGotAnOffer)

14. Consulting clubs case interview examples

• Berkeley case book (2006)
• Columbia case book (2006)
• Darden case book (2012)
• Darden case book (2018)
• Duke case book (2010)
• Duke case book (2014)
• ESADE case book (2011)
• Goizueta case book (2006)
• Illinois case book (2015)
• LBS case book (2006)
• MIT case book (2001)
• Notre Dame case book (2017)
• Ross case book (2010)
• Wharton case book (2010)

Practice with experts

Using case interview examples is a key part of your interview preparation, but it isn’t enough.

At some point you’ll want to practise with friends or family who can give some useful feedback. However, if you really want the best possible preparation for your case interview, you'll also want to work with ex-consultants who have experience running interviews at McKinsey, Bain, BCG, etc.

If you know anyone who fits that description, fantastic! But for most of us, it's tough to find the right connections to make this happen. And it might also be difficult to practice multiple hours with that person unless you know them really well.

Here's the good news. We've already made the connections for you. We’ve created a coaching service where you can do mock case interviews 1-on-1 with ex-interviewers from MBB firms . Start scheduling sessions today!

Related articles:

Case Interview 2024 – Guide for Your Consulting Case Interview

A case interview is a type of job interview in which the candidate must analyze and solve a problematic business scenario (“ case study ”). It is used to simulate the situation on-the-job and to find out if the respective candidate meets the necessary analytical and communications skills required for the profession. Case interviews are commonly and globally used during the selection processes at  management consulting firms such as McKinsey , Boston Consulting Group (BCG), or Bain & Company . It is the most relevant part of the process for consulting jobs, and they are usually based on projects that the hiring firm has delivered for a client. It is an exercise that requires a logical approach to finding the problem and an appropriate solution.

• Case Interview Questions and Answers
• What Is a Case Interview?
• Who Uses Case Interviews and Why?
• What Are the Skills Required in a Case Interview?
• What Are the Differences Between …?
• Case Interview Examples from Top Consulting Firms
• Case Interview Frameworks
• The Best Frameworks for Solving Cases
• How to Develop Your Own Framework in 4 Steps
• Case Interview Preparation: 9 Tips for Successful Case Preparation
• How to Solve a Case Study in 10 Steps
• Case Interview Secrets: 13 Final Tips for Your Actual Case Interview 
• PrepLounge: The Key to Your Success 
• Get Started Right Away and Practice Your First Cases

Would you like to see this YouTube video?

Without your consent we cannot embed YouTube videos. Click the button below to allow YouTube videos to be embedded .

By allowing this service, you consent, in accordance with article 49 paragraph 1 sentence 1 lit. a GDPR , to your data being processed in the USA . The USA is not considered to have adequate data protection legislation. Your data could be accessed by law enforcement without prior public trial in court. You can change your settings regarding consent to external services at any time in our Cookie and Privacy Settings .

A  case interview  is part of the job interview process in which you as the candidate have to analyze and solve a problematic business scenario while interacting with the interviewer. The case study is often based on a problem the interviewer has worked on in real life. This part of the interview is intended to be more of a dialogue. You will need to be proactive and ask questions when attempting to close in on the correct conclusion. Oftentimes, the consultant will attempt to guide you in the correct direction by asking questions himself.

An example question might be :​ The CEO of Deutsche Bank has become increasingly concerned about their declining profitability over the last 36 months and has asked you to determine the factors causing the decline as well as recommend a strategy to reverse this trend.

During the entire application process, you will partake in  up to six case interviews  in two rounds or more. This is dependent on the position you are applying for. Most case interviews have the same underlying structure. An individual case interview may take up to an hour and usually consists of four parts:

Case interviews have always been a part of management consulting interviews. Nowadays, also marketing, strategy, operations, or retail positions tend to use similar formats because they are a great tool to probe the quantitative and qualitative skills of an applicant . It allows interviewers to get a deeper insight into how you present yourself as a candidate and apply the limited amount of information given to you.

The reason for the prevalence of the case interview format in management consulting is that the topics and themes handled in most cases reflect conditions close to the reality of the day-to-day activities of a consultancy. It requires the applicant to  ask the right questions , apply  structured frameworks,  and think outside the box . As a consultant, you will spend a lot of time client-facing, and so soft skills are just as important as hard skills to the interviewer. The case interview allows hiring companies to ask the question "Would I be happy to put this candidate in front of a client?".​

Due to the scenario set up in a case interview, it is also a test of general business acumen. Many consultant projects will be in industries where the consultants aren't experts, especially junior consultants. This is normal, but to be effective as a consultant business acumen is an important foundation for consultants to maintain effective strategy recommendations. Companies pay consultants for their minds rather than their industry expertise.

A case interview has no “correct” or “standard” answer. There are often many solutions to a single case and in the end, what counts is your train of thought and how you got to your solution. The interviewer will evaluate you across five main areas:

1)  Problem-Solving Skills 

The interviewer will analyze your ability to identify problems , isolate causes, and prioritize issues. During a case interview, you will be presented with a wide range of relevant and irrelevant data pieces. You must know how to use this data to make your recommendations and you have to prove that you are able to construct a logical argumentation without rushing to conclusions based on insufficient evidence.

2)  Creativity and Business Sense Skills 

As a consulting candidate, you should know the basic business concepts as well as show a certain amount of business sense and creativity. If the interviewer asks you to find innovative ideas to increase the profitability of a hotel chain, you will have to come up with a range of ideas that make business sense. You are not expected to have deep knowledge of the hospitality industry, but to be able to ask relevant and insightful questions on the aspects important for you to solve the client’s issue at hand.

3)  Structure 

Maintaining a structure means that you solve the question with a clear step-by-step approach that you communicate actively with your interviewer. A good structure is the most important part of a case interview, as it is the underlying base of your whole approach and argumentation. It is also the main reason why candidates fail their case interviews. A common mistake that candidates make is that they try to apply standardized frameworks to any case they are given. Instead, you should solve each case by creating a framework specifically tailored to its needs – as you would do as a consultant on the job. Practice your structure with our Structuring Drills .

4)  Math Skills 

As a consultant, part of your job is number-crunching and interpreting data. Therefore, it is important that you have a good feeling for numbers and have great mental math skills. You should be able to perform simple calculations in your sleep. You can practice your math skills with our Mental Math Tool .

5)  Communication Skills 

In times of digitalization, soft skills become more and more important for management consultants. On the job, you will be in contact with high-level CEOs, clients, partners, and colleagues. Strong communication is crucial for you to get your work done efficiently. Thus, your interviewer will pay close attention to the way you communicate and present yourself during your conversation. Always be professional, answer concisely, and communicate the key message first (see Pyramid Principle ).

First and Second-Round Interviews 

While the format of the first and second-round interviews stays the same, the seniority level of the interviewer differs . The person interviewing you in the first round is usually more junior, having up to four years of consulting experience (Associates or Engagement Managers). The second round is led by Partners who have more than ten years of experience and tend to drill you to understand how you cope with challenges. Therefore, second rounds are perceived as more difficult by candidates. Since partners have a stronger voice when discussing an applicant, your performance during the second round of case interviews carries also more weight. For more information on the different positions, please read McKinsey Hierarchy: The Different Position Levels .

Candidate- and Interviewer-Led Case Interviews

In candidate-led cases, the interviewer expects the candidate to lead him/her through the case. As a candidate, you can do so by asking relevant questions, and by developing and testing your hypotheses. Candidate-led cases are the most common  types of cases . You will encounter them at the majority of the big consulting firms such as BCG, Bain, and occasionally at McKinsey.

Interviewer-led cases are most frequently used at McKinsey. As the title suggests, the interviewer’s guidance through the case interview is firmer.

You can find more information on the two different interview styles in our BootCamp article: Interviewer-Led vs. Candidate-Led .

In the following, you can find some examples of initial case interview questions :

Bain Case: Old Winery You inherit an old winery, the Old Winery, from your grandfather. Since you have little knowledge about wine cultivation, you don't want to run the winery operationally, but you find the idea of owning a winery exciting. However, your plan is to breathe new life into the winery. Read the entire case .

Deloitte Case: Footloose Duraflex is a German shoe manufacturer with an annual turnover of approximately €1 billion. Your largest sales market has always been the boot market. In this market, you compete with three other main competitors. Management is asking you for advice. Read the entire case .

Roland Berger Case: Onlinestar Onlinestar, an online retailer specializing in furniture and garden products (core business), has experienced significant growth in recent years due to an expansion of its product portfolio. The board of Onlinestar is asking you for an analysis of the reasons for the negative results, as well as recommendations derived from it. Read the entire case .

Practice More Cases Now!

You can find 200​ case studies, including cases from real companies and our consulting coaches, in our Case Library !

Case interview frameworks are the perfect tool to structure your thoughts during the interview. They help you break down a problem into its components so that you can systematically and methodically navigate through the case and the business problem. This approach will convince your interviewer that you can apply your skills from the case interview to the job as well.

A framework can help you solve a business problem in a case interview in a structured and organized manner. To determine which framework is most suitable for the given case, you should be familiar with the most common case types. Our coaches Guennael and Vlad explain their approaches:

What does a framework really need to accomplish? Essentially, three things:

First , it must be MECE (Mutually Exclusive, Collectively Exhaustive); second , it must help you systematically and methodically approach the case so that you not only find the best answer; third , it must convince your interlocutor that your success is repeatable and that you will solve this case and the next and the one after that.

When preparing for my BCG interview, I ultimately relied on just two framework concepts, which I then adapted to the respective case: First, a version of the profitability case (Profit = Revenue - Costs and Revenue = Price x Quantity) ; second, a basic version of: Product, Price, Customer, Competition, Company).

Are these two framework models optimal in every case? No, they are not. Did they serve their purpose? I used them in more than 10 practice cases with former BCG employees as well as in my 5 BCG cases... and I succeeded, that's for sure :) I would even argue that every case can be solved using one or both of these methods . Learn them, keep them in your pocket, and be ready to use them. If you find something better, great! But I'd prefer you start with an "okay" framework and focus on solving the problem , rather than spending the first 30 seconds of the case trying to find the "perfect" framework, failing, and feeling forced to think on the fly at the beginning of the solution process.

There is no universally applicable structure . You should have some patterns in mind for specific types of cases, but you should adjust them depending on the case:

Additional details of the case

Below you'll find a list of the most common case types and some general recommendations for structuring :

Market Sizing - Structuring from the supply or demand side. Structuring based on a formula or a issue tree .

Profitability - Basic profitability framework. Consider different revenue streams and the product mix.

Market Context (market entry, new product, acquisition, etc.). Always start with the big picture "market". Conclude with a specific strategy to achieve the case objective (e.g., "market entry strategy" - for market entry. "Exit strategy" for the PE case. "Go-to-market strategy" for a new product). Structure it as if you were defining the workflows for the real project.

Operational Mathematical Problem (e.g., Should we increase the speed of an elevator or simply buy a second one? How should we reduce queues? Etc.) - Structuring as a process/value chain, with inputs, processes, and outputs.

Cost Reduction - here are some recommendations for structuring:

Structuring:

How do the costs break down and what are the largest costs?

Benchmarking the largest costs to identify improvement potential

Process improvements to achieve the benchmarks

Costs and benefits of the proposed initiatives

The key concepts you must learn:

Internal/external benchmarking

Core processes (usually optimized) and supporting processes (usually trimmed)

Mathematical structures (frequency of operations * time per operation)

Other useful structures (e.g., People - Process - Technology)

Evaluation - Pure financial structure with cash flows, growth rate, WACC / Hurdle Rate, etc.

Synergies - Revenue synergies (price, quantity, mix) and cost synergies (value chain).

Social/economic cases (e.g., How can the quality of life in the city be improved? How can museum revenue be increased?) - significant variability.

Practice 3-5 social cases before the interview. Additionally, there are s everal useful framework concepts that you can apply in the middle of the case to find the cause of a problem. For example:

People - Processes - Technologies

Capacity - Utilization - Production rate

Product - Distribution - Marketing - Price

Value-based pricing - competition-based pricing - cost-based pricing

You will learn these frameworks while solving cases. It is useful to have a set of them in mind to quickly identify the root cause .

To be able to address specific questions in case interviews, it is important to develop your own frameworks . Our expert Benjamin has valuable tips on this.

(Almost) Never use a standard framework from the books . In strategy consulting, the goal is to assist clients facing unique problems with a customized solution. It's unlikely that you can force your approach into a standard framework.

Put yourself in your client's shoes and show empathy for the issues. This way, it becomes much easier for you to understand what the key issues are that you need to consider when formulating a recommendation, and you can ensure that you don't forget anything. I always ask myself, "What would I do if this were my company and my own problem? What do I need to know/understand to make a decision?"

Ensure that every topic you want to address is relevant to the final recommendation. A simple check is to ask yourself, "If I spend time on this specific topic and get some answers to my questions (e.g., market size, competition, etc.), will this provide useful elements for the final recommendation given my client's issues ?" If the answer is no, then you should skip this subtopic.

Practice a lot! The above tips come from my own experience with building MECE structures , but keep in mind that it takes a lot of practice to achieve satisfactory performance here.

1. Learn the Theory By reading this article, you've already taken the first step to understanding what case interviews are all about. Well done! You can now take it a step further by learning the theory you need to solve the cases. In general, you should learn how to :

Identify your case type (e.g., market sizing , market entry , profitability , growth )

Structure your thoughts (e.g., issue tree , MECE , pyramid principle )

Use business analysis tools (e.g., ABC analysis , break-even analysis , benchmarking )

Define common business terms (e.g., NPV , CAGR , fixed and variable costs )

In our Case Interview Basics, you'll find all the necessary fundamentals.

2. Develop Your Business Intuition Step by Step

Since you need to have a good business sense to successfully complete your case interview, you should invest some time beforehand to gradually build up your business intuition. The earlier you start, the easier it will become. Make it a habit to regularly read business publications and magazines. You can read new releases from McKinsey, Bain, and BCG, or find other sources that appeal to you. Try to acquire a basic understanding of economics, strategy, and industries, such as retail, airlines, telecommunications, banking, natural resources, and technology.

3. Update Your Math Skills

For all case interviews, you must calculate without a calculator. Therefore, refreshing your mental math skills should be a regular part of your daily preparation plan. Practice until you feel one hundred percent comfortable with the basic skills of addition, subtraction, division, multiplication, and growth rate calculations in your head. Read our article on Fast Math and use our mental math tool to train your performance. When confronted with a math problem in your case interview, this will significantly reduce the pressure.

Knowing shortcuts for a variety of calculations can simplify mathematical problems. For example, break down complex mathematical problems into several small operations:

97 x 53 = (100 - 3) x (50 + 3) = 5000 + 300 - 150 - 9 = 5141

4. Practice Makes Perfect

Take a look at our extensive case library , which prepares you for all possible case types. Our case library includes cases that have been used in past case interviews. Solving cases on your own can give you a first sense of what to expect in the case interview. However, the only way to improve your skills to successfully pass the interview is to put yourself in a case interview situation. Find candidates to practice with and practice regularly. The more feedback you can get, the better. This will help you improve.

PrepLounge offers the world's largest case interview community. Simply schedule or accept a practice interview with other candidates on our meeting board .

Here's how it works:

Schedule: Once you and your case partner confirm the practice interview on the meeting board, the meeting is set and will be visible on your dashboard.

Communication: We recommend contacting your case partner directly to discuss communication methods and case preferences during the interview.

Interview: During the back-to-back meeting, you and your case partner take turns playing the roles of both interviewer and interviewee. Don't neglect the part of the session where you play the role of the interviewer. This allows you to identify important points and adjust your approach accordingly.

Case: By default, two PrepLounge cases are randomly selected. However, you can exchange them and choose one of our over 180 cases or use your own case.

Feedback: This is the most important part of your practice interview as it helps improve your case performance. Please provide your interview partner with constructive feedback, just as you would expect from them.

5. Seek Support from Coaches

To make your case interview preparation as effective as possible, we also recommend investing in coaching sessions with experienced top consultants. Our experience shows that this investment pays off, as it significantly increases your chances of receiving an offer for your dream job (by four times, to be exact). Our coachesknow exactly what interviewers want and can work with you on every aspect of your case performance, whether it's structuring, personal suitability, confidence, or communication. Furthermore, they can provide you with valuable networking tips and help you get a referral.

We provide you with a transparent list of all case interview coaches , including their professional and educational background, top skills, individual approaches, ratings, and recommendation rates. This way, you can individually select the perfect expert for your coaching sessions . Additionally, you can benefit from CoachingPlus , which includes a premium membership and a generous discount (compared to individual coaching sessions).

6. Learn and Track Your Progress

You can do as many cases as you want. If you don't learn from them, you won't improve your case performance. That's why you should do the following: At the end of each case you complete, whether on your own, with a case partner, or with an expert, write down in your own words what mistakes you made and what you learned. Repeat the case after a few days and apply what you've learned to ensure you're making progress. Tracking your progress motivates you and ensures you don't repeat the same mistakes.

7. Don't Forget the Personal Fit

No matter how well you master the case, if you don't personally fit into the company, you won't get the job offer. Ultimately, consulting is a "people's business" that involves teamwork and a lot of time with your colleagues. To master the part of the interview that focuses on personal suitability, it's important to understand what an interviewer is looking for in a candidate to decide if they fit into the company personally. Typically, the interviewer has three primary questions in mind.

Next, you should learn how to convey to your interviewer that you fit what they're looking for. Practice your answers to the personal fit with other candidates or experts:

Why consulting?

Why company X?

Why should we hire you?

Tell me about yourself!

Give me an example of when you led a group to achieve a difficult goal!

Find more frequently asked questions in stress question mode.

8. Train Confidence

The more you practice, the more confident you will feel. However, feeling confident isn't the same as appearing confident. Sometimes you can come across as insecure without realizing it. This can be due to small habits in your communication style. Therefore, ask your PrepLounge case partner or expert to consider your verbal and non-verbal communication and provide feedback on your confidence or insecurity . Focus on the following aspects during practice:

• The tone of your voice. A monotone voice or speaking too quickly gives an impression of insecurity and poor communication style. To avoid this, it's helpful to listen to podcasts of great speakers for 30-60 minutes a day. After a few days, you'll start speaking in a similar manner as you adopt their communication style.
• Smile. A smile can be a powerful way to show that you're enjoying the conversation and not afraid. You can also force a smile (naturally, not too much) if you get feedback that you appear too serious.
• Eye contact. You don't need to continuously stare into the interviewer's eyes during the conversation, but you shouldn't look away when they ask you something.
• Ability to break the ice. Confident people aren't afraid to engage in small talk with interviewers. Silence creates less connection and can be seen as a sign of lack of confidence.
• Posture. You should try to sit upright most of the time on your chair. Leaning too much towards your interviewer can be interpreted as lack of confidence.

9. Take Breaks

Overall, based on our experience with other case partners, you should prepare for an average of 50 hours over a period of up to 6 weeks and practice daily. This can be exhausting, and we know that many candidates struggle with motivation and concentration, especially after an intense case preparation period. This is usually because they forget to incorporate regular breaks into their preparation plan. Professional athletes, for example, always take time to rest and allow their muscles to regenerate. You should treat your brain muscles the same way. A good strategy is to develop an evening and morning routine that allows you to relax and increase your energy level for the preparation period during the day. Here are some examples of what you can do:

15-20 minutes of exercise in the evening or morning

A cold shower in the morning

Meditation or journal writing

Define three important things for the next day and allocate time for all activities, prioritizing the most important ones first

No social media for an hour after waking up and before going to bed

Get enough sleep (at least 7 hours)

Take breaks between each case or intensive case practice and do something completely different (e.g., workout, play video games)

Step 1: Listen actively and take notes. Write down every piece of information, especially numerical data .

Step 2: Restate the question. Pause, paraphrase, and make sure you understand the problem statement by confirming with the interviewer.

Step 3: Clarify the objectives and identify the problem. Ask specific questions and double-check on objectives. Make sure you completely understand the problem.

Step 4: Write out your structure. Ask your interviewer for a minute to prepare your structure and organize your notes. Identify your case type and use an issue tree to customize your structure. The branches of your issue tree should be MECE.

Step 5: State your hypothesis. Now that you have set up the issue tree, your task is to test each branch to see if it is the root cause of the problem. Where to begin? A hypothesis based on an educated guess helps here.  (e.g. "Since you have mentioned that revenues are more or less flat, my hypothesis is that the problem is mostly driven by the cost side of the business. If it is okay with you, I will start by […]")

Step 6: Think out loud. Sharing your thoughts allows the interviewer to interact. Refine or rebuild your hypothesis as you find out more.

Step 7: Gather more data in order to test your hypothesis. Proactively ask for relevant data and always segment it (e.g. using the ABC analysis ). Try to evaluate whether trends have been company-specific or industry-wide.

Step 8: Dig deeper while staying structured (MECE!) throughout the case. Always refer to the structure you have set up at the beginning of the case, but be flexible as the case evolves. If you conclude that your hypothesis is false, eliminate that branch and go to the next one. Summarize findings when switching major branches. If your test confirms your hypothesis, go deeper into that branch, and drill down to the lower levels until you identify all proven root-causes.

Step 9: Choose a recommendation and use the Pyramid Principle to structure your conclusion. Ask for a minute to gather your thoughts and then state your recommendation. You need to deliver a one minute, top-down, concise, structured, clear, and fact-based summary of your findings.

Step 10: Stand by your conclusion. Your interviewer will likely challenge your recommendation (either to see if you can handle pressure or to assess if you really believe in what you are saying).

1. Focus on the task at hand 

Don’t think too much about the approach your interviewer is taking. It should not matter much if the conversation is interviewer- or candidate-led. If you go into your interview with a profound understanding of how to handle even a difficult case, the format of the interview should not be an issue. Keep a cool head and structure your thoughts.

2. Ask the right questions 

At the beginning of the case, your interviewer will present you with the situation of the client. Don’t rush into the analysis without developing a deep understanding of the problem first. Ask your interviewer questions to clarify the case. This is expected behavior that also takes place later with the client. Make sure you understand what the  business model  and your  objective  in the respective case are (regarding both money and the timeline). If there are any other possible limitations you are unsure about, ask your interviewer in a concise way. Asking unnecessary questions will raise doubts about your ability to work efficiently under pressure.

3. Buy time with repetitions 

A common trick consultants use is the  repeating of facts or overall goals . By doing this, you are showing a fundamental comprehension of the case and are emitting an aura of control, gradually heading towards a solution. This technique can give you more time to think. Articulating the facts of the case can also be a source of clarity and allow you to form solutions more quickly.

4. Only form a hypothesis with sufficient information 

Do not state a hypothesis at the beginning, a stage in which you may still have incomplete information. Get a good sense of the case’s environment and ask sensible follow-up questions . Only then frame a structure and formulate a hypothesis.

5. Utilize data for your analysis 

Taking wild guesses is a death sentence for your case interview. Make sure your claims are backed up by the facts, and remain calm when presented with new information. Consultancies will closely observe how you  make use of new data and incorporate it into your hypothesis .

6. Take clear notes 

Taking  structured notes  is a highly underrated skill when dealing with a case. Making sure your notes are coherent and clear will make your thoughts easy to navigate and ensure you do not lose your footing during the interview.

• Place your sheet horizontally to maximize your space, and jot down the case’s  key question on the left side of the page. This way you will never lose sight of the main objective . The remaining portion will be dedicated to the issue tree, with your hypothesis included above the issue tree.
• Make sure that you highlight key pieces of information that add substance to your hypothesis.
• When it comes to calculations , use a separate page, but practice having it organized in case you need to go back through your assumptions or calculations.
• Try to limit the number of pages you use to a  maximum of three sheets . Otherwise, you will stress yourself out while trying to find what you are looking for.

7. Structure is key 

The most important aspect of a case interview is having a good structure. You can structure your case by following these four steps:

• Craft an issue tree as the overall foundation for your structure. This is a customizable framework used to analyze the root causes of problems in a case. It helps you to break a complex problem down into its components.
• Make sure that your issue tree is MECE to avoid inefficient dependencies between branches that will slow down your analysis. MECE is a way of segmenting information into sub-elements that are mutually exclusive and collectively exhaustive. 
• Prioritize and concentrate on high impact issues of your issue tree that will create value for your client. Always make sure you explain the reasons behind your choices to the interviewer.
• Use the Pyramid Principle to structure your conclusion , a three-step structure to present your synthesis in an effective and convincing manner. First, state the recommendation (What?). Second, provide three reasons supported by data (Why?). Third, provide information on how to implement the recommendation (How?). 

To practice your structure, you can use our Structuring Drills.

8. Don't force-fit frameworks

Standard frameworks can be a source of inspiration, but should never be force-fitted to a case. They are very stiff and do not allow room for customization . If you use pre-defined frameworks, you run the risk of missing important elements of the specific problem you are trying to solve. A consultant would not just force-fit frameworks to their specific client’s problem, so you should not do this in your case interview, either. Each case is unique and requires an individually customized framework that is MECE as well as adapted to the problem you are trying to solve, the company, and the industry.

9. Don’t panic if you get stuck 

If you ever get stuck, don’t freak out – it happens. What counts is how you deal with the situation. Here is what you can do:

• Take a deep breath  or a sip of water if you have a glass of water nearby.
• Take a moment to grasp the big picture , to recap what you have learned so far and what you still need to find out to address the main question at hand.
• Outline how these sub-questions can be answered , and what kind of data or information you will need to do that.
• Double-check whether data or information provided by the interviewer at an earlier stage is now getting new relevance.
• Think out loud and take the interviewer along with your thinking process. If you are puzzled by some obvious contradiction, actively discuss this with your interviewer. Oftentimes, an interviewer will wait for you to explicitly verbalize your confusion before gently guiding you.

10. Sometimes there is no clear answer 

Oftentimes, a case interview has no “correct” or “standard” answer. The case may encompass you  exploring the issues and walking down several paths . There are often many solutions to a single case that may differ from the interviewer’s expectations. In the end, what counts is your  train of thought and how you got to your solution . You are not expected to know everything about business, but demonstrate a logical judgment and a good approach to solve problems.

Nevertheless, you should always give a clear recommendation at the end of the interview, when the interviewer will ask for your conclusion. The trick is to use supporting arguments based on what you have learned during the analysis, to point out limitations, and to also highlight additional areas to explore to confirm that your current understanding is the right one.

11. Engage the interviewer 

The interview should be a dialogue, so make sure to engage the interviewer and demonstrate not only your business judgment, but also your communication and people skills . This gives the first insight into how you might interact with future clients and colleagues. How can you do that?

• Explain. Share your thought process with the interviewer, and always let them know what your next steps are.
• Listen. During your case interview, the interviewer will usually give you hints and steer you in a direction. Notice that! If they ask a specific question, e.g. “Name three points about…”, answering in two or five points will mean that you didn’t pay attention.
• Ask questions. Create a discussion, initiate small talk, and use your chance to make a positive connection with the interviewer, especially at the end of every interview when you get to ask final questions. Find a point in common and try to stand out. Here is a list of the best questions to ask at the end of an interview .  

12. Be confident 

You don’t necessarily need to be extroverted to be a top management consultant, but you need to be confident. Consulting is a people job as much as it is an analytical job. It is important for the client to feel that you know what you are doing. Thus, this is something the interviewer will take into consideration. Here are five things you can do during the interview to come across as more confident:

• Try to enjoy the interview by focusing on the challenge, the satisfaction it brings you when you solve the case, and the joy of sharing your life experiences with someone else. If you have fun, chances are high that the interviewer has fun, as well.
• Find your own style and don’t try to pretend to be someone that you are not. It is fine if you are not the most outgoing person. Just be genuine!
• Sit up straight , but don’t be too stiff. Push your back against the back of the seat and don’t just sit on the edge of the chair.
• Make eye contact , but don’t stare, either.
• Speak in a clear , calm, and unrushed manner. Don't mumble or whisper, but equally don't shout. Think before you speak!

13. When in doubt, reschedule 

If you’re not feeling confident about your chances, don’t hesitate to reschedule. If you take this course of action, take a few things into consideration. Make sure to suggest an alternative day and avoid rescheduling multiple times at all costs. The consultancy will be grateful for you to suggest an immediate alternative. Try to be transparent as to why you are rescheduling without going too deeply into details. However, rescheduling should only be used as a last resort.

To become the best, you must learn from the best. That is exactly what PrepLounge can offer you. The vast  PrepLounge community  makes it easy to  find case partners with the same ambitions and goals as you. Whether you are looking for a  professional case coach  or other aspiring consultants, you will have no problem finding case partners in the build-up to your interview. Our PrepLounge coaches – from Bain to McKinsey – are uniquely qualified to provide you with insights into the mastery of a case interview.

Apart from case partners from every imaginable background, PrepLounge provides a colossal collection of online resources to give you the best preparation leading up to your case interview. We will provide you with questions and answers to the most important consulting case types and share in-depth knowledge for the best possible case interview preparation. You will be able to find case partners to practice online and always be on top of the latest insights and news regarding consulting jobs and top consulting firms.

As a PrepLounge member, you will receive access to all these perks. PrepLounge will accompany you all the way from your application through to your contract negotiation. You strongly diminish your chance of success without sufficient preparation. Invest in your future and give yourself the best chance at acing your case interview! Exchange your experience with peers from all around the world in our  Consulting Q&A . Join our case interview community today and embark on your journey into consulting!

Oliver Wyman Case: Full Electrons Ahead

Simon-Kucher Case: GST Cruise Company

Deloitte Case: Footloose

Oliver wyman case: setting up a wine cellar.

zeb case: Quo vadis, customer?

Continue to learn.

The Most Common Pitfalls in Case Interview Preparation

Get insider tips from a top consultant!

Consulting Interview Questions

Practice your consulting interview questions now!

McKinsey PEI (Personal Experience Interview)

• Select category
• General Feedback
• Case Interview Preparation
• Technical Problems

Case Interview 101: The Online Guidebook

“Case Interview” is the cornerstone of consulting recruitment, playing a decisive role in final results. In 30 minutes, your “consulting” qualities will be tested to the limit as you cruise through a hypothetical “consulting project” with the interviewer.

Yes, this is a BIG topic. The depth of content in this single article is HUGE with various chapters ranging from beginner’s topics to more advanced ones. You would want to bookmark this page and go back often throughout your whole preparation journey.

What is a case interview?

A case interview is a job interview where the candidate is asked to solve a business problem. They are often used by consulting firms, and are among the hardest job interviews, testing both problem-solving skills and “soft” skills. Case interviews often last 30-45 minutes each, and firms can utilize up to 6 case interviews, usually divided into 2 rounds.

Example case questions:

• “We have a restaurant called “In-and-out Burger” with recently falling profits. How can you help?”
• “The CEO of a cement company wants to close one of its plants. Should they do it?”
• “A top 20 bank wants to get in top 5. How can the bank achieve that goal?”

Case interviews are modeled after the course of actions real consultants do in real projects – so success in case interviews is seen by consulting firms as a (partial) indication of a good management consultant.

During the interview, the interviewer will assess your ability to think analytically, probe appropriate questions, and make the most client-friendly pitches. Be noted that the analytical thought process is more important than arriving at correct answers.

Generally, there are 2 styles of conducting cases:  Candidate-led and Interviewer-led. 

Candidate-led cases

On this end, the interviewer rarely intervenes; the candidate will lead the approach from structuring the problem, drawing frameworks, asking for data, synthesizing findings, to proposing solutions. This format can be difficult for beginners but it provides you with much control over the case.

Interviewer-led cases

On this end, the interviewer controls the process in significant ways. He or she has the candidate work on specific parts of the overall problem and sometimes disregards the natural flow of the case. The game here is not to solve the one big problem, but rather to nail every question, every pitch, every mini-case perfectly. Because the evaluation is done on a question basis, the level of insightfulness required is higher.

Most cases will fall somewhere in the middle section of that spectrum, but for educational purposes, we need to learn case interviews from both extremes ends.

Great details in each and every aspect of the case, as well as tips, techniques and study plans are coming in the chapters below. You may skip straight to Chapter 3 if you have business background and confidence in your own understanding of the terminology used in case interviews. 

To better understand or practice candidate-led and interview-led cases, let’s book a personal meeting with our coaches . At MConsultingPrep, you can connect with consulting experts who will help you learn the ins and outs of both cases and the solving approach to each one. Get “real” practice now!

Case interview starter guide for non-business students

All consulting firms claim that all educational backgrounds have equal chances. But no matter what, case interview reflects  real-life business problems and you will, therefore, come across business concepts .

Not everybody has the time to go to a full Business Undergraduate program all over. So through this compact Chapter 2, I will provide you, the non-business people, with every business concept you need in case interviews.

Accounting and financial terms – The language of business

Accounting & Financial Terms are often called the language of business, which is used to communicate the firm’s financial and economic information to external parties such as shareholders and creditors.

There are three basic financial statements : Balance Sheet, Income Statement, and Cash Flow Statement.

Balance Sheet

A snapshot of the current stage of the company’s property, debt, and ownership at one given point in time, showing:

• Assets: what the company owns: Building, Equipment, Cash, Inventory, along with some other intangible items.
• Liabilities: what the company owes: Loans, overdrafts, bills to be paid, etc. Debt is like negative assets.
• Equity (Net worth): Calculate by taking Assets subtract Liabilities.

The neat thing about the Balance sheet is that it’s always balanced. Every action, every transaction changes the three components but it’s always in harmony.

Income Statement

A record of the business performance through a period of time , given it a quarter or a year. The Income Statement directly tells you how the company is doing in terms of making money, the heart of any business.

From the top to bottom, the Income Statement shows the Revenues, Costs, and Profits. That’s why often, Profits are referred to as the “bottom line”.

There are a few types of costs to notice – see the two pictures below this table.

One important thing to notice is that even though it may seem like, the Income Statement does NOT necessarily relate to cash. Many times, especially for B2B transactions, the selling happens before the money flow. Therefore, we may have to record revenue without having the cash.

Cash Flow Statement

There’s a famous saying that: Income statement is an opinion, Cash Flow statement is a fact.

The Cash Flow statement just strictly monitors the cash flow in or out, categorized into different sections. Three of them are:

• Operation: illustrates how much cash the company can generate from its products and services.
• Financial: includes the sources of cash from investors or banks and the uses of cash paid to shareholders.
• Investing: includes any sources and uses of cash from a company’s investments.

Upon completion this section, you should be able to read and interpret financial statements for business diagnosis and decision-making.

More importantly, you possess the conceptual base to start solving case interviews on your own. Do not forget that, as with any other language, becoming proficient with accounting and financial terms require constant practice.

Organizational structure – The heart of a company

When it comes to organizational structure, it is important to notice the fine line between the company’s ownership and management .

Technically, at the highest level, there are shareholders . For private companies, the group of shareholders and their shares are not necessarily disclosed and publicly tradable. For public companies, on the other hand, shares are publicly traded on different stock exchanges. One of the most famous is the NYSE, which stands for New York Stock Exchange.

• A company can have one, a few, or millions of individual owners, but being governed by the Board of Directors – a group of people elected by owners, with the President or Chairman being their highest leader.
• The Board usually hires a management team to manage the company. They are led by the Chief Executive Officer – CEO , who makes every decision on day-to-day work. Most of the time, the Board of Directors doesn’t directly intervene in the CEO’s work, but they reserve the right to fire CEOs.
• Besides that, there’s a committee called Supervisors. The supervisor’s job is to independently monitor the CEO and the management team and report to the Board.

Below CEOs, there are two general two ways of structuring the company. One way is through business lines and the other one is through functions. Think of business lines as mini-companies themselves inside the big company.

Within functions, here are a few most typical divisions most companies have:

Business strategy concepts

Even with business students, strategy is a challenging topic – especially with those without a strategy major. These fundamental concepts will get you started.

• Organization: In general, this refers to how a company is organized, what are different components that make up a company
• Governance refers to how a company is managed and directed, how well the leader team runs. The leader team includes the Board of Directors and Board of Managers. A company with good governance has good leadership people, tight control, and effective check & balance processes, etc.
• Process looks like rules and common practices of having a number of processes, entailing every single activity. Process design should include 4 factors: who, what, when, and accompanied tools.

For example, let’s look at Kim’s family picnic process.

• The who part is presented on the y-axis, left-hand side, labeling all departments, a.k.a: family members, involved.
• The what part is presented through the big mid-session with each box represents every single activity.
• The when and tools parts are presented at the bottom

B2B  vs B2C : stand for “business-to-business” and “business-to-customer”. These two terms refer to two types of transactions a company typically does: transactions with other companies and transactions with individual customers.

Bottom-up vs Top-down: this refers to two opposite schools of thought or action. Top-down usually encompasses various general branches while bottom-up tends to narrowly focus. 

Management consulting terms & concepts

These are the most common consulting terms you may encounter not just in case interviews but also in consulting tasks .

• Lever: Think of this as one or a group of initiatives, actions to perform to meet certain goals. e.g. some levers to help increase customer experience in a hotel are free breakfast, free Wi-Fi, 24/7 support, etc.
• Best practice: Refers to how things should be done, especially if it has been successfully implemented elsewhere.
• Granular: This refers to how specific and detailed a break-down or an issue goes. For example, a not-so-granular breakdown of the NBA is the West and the East conferences. A much more granular is something like this: Leagues, Conferences, Divisions, and Teams.
• MECE: MECE is so important and we explain it in detail in this article. In short, MECE is the standard, per which we can divide things down in a systematic, comprehensive, and non-overlapping way.

There are three parameters the consulting world uses in the categorization of businesses.

• Industry: used to group different companies mostly based on their product (Banking, Construction, Education, Steel Industry, etc.)
• Function: is the categorization mostly based on missions and the type of roles of different parts of a company. We can count some as Human Resource, Finance, Strategy, Operation, Product Development, etc.
• Location: is where things are, geographically.

Normally two consultants ask each other “What do you work on?”, they need to give 3 pieces of information in all of those three parameters, such as “I worked on a Cement project, focusing on Finance, in Southeast Asia”. In fact, all of the McKinsey support networks are organized in this way. During my projects, I would need to speak to some Cement experts, some Finance experts, and some local experts as well.

This chapter is relatively long, yet it is still way shorter than 4 years at business college. I hope this will act as a great prerequisite to your case interview study. Make sure that you have mastered all of these content before really tackling the Case Interview.

Case interview example – The typical flow

In a simplified way, a typical case would go through these phrases (we will talk about exceptions in great detail later):

Case question -> Recap -> Clarification -> Timeout -> Propose issue tree -> Analyze issue tree -> Identify root-causes -> Solutions -> Closing pitch

Problem-solving fundamentals – Candidate-led cases

Though most cases will be conducted in mixed format, let’s dive deep and learn about each extreme end of the spectrum to get the full picture.

Even though this is the harder format, it shows us the foundation of how management consulting works, i.e: the consulting problem-solving logics!

If you were exposed to case interviews, you have probably heard about some of these concepts: framework, issue tree, benchmark, data, root cause, solutions, etc. But how do they all fit into the picture?

It all starts with the PROBLEM

Before getting into anything fancy, the first step is to define and be really clear about the problem.

This sounds easy but can be quite tricky. Here are a few guidelines:

1. What’s the objective?

2. What’s the timeline required?

3. Any quantified or well-described goals?

For example, one client can state a problem as: “I lost my car key”. In normal contexts, this is a perfectly simple and straightforward problem. But a consultant tackling this would go ask clarification questions to achieve even more details:

1. Objective: the client in fact just needs to be able to use the car.

2. Timeline: this is an urgent need. He is happy only if we can help him within the next hour.

3. Specificity: help the client put his car into normal operation like before he lost the key.

Find the ROOT-CAUSE, don’t just fix the symptom

To completely wipe out the problem and create long-lasting impacts, consultants always  search and find the root causes.

For example, fixing the symptom is like you breaking the door lock, getting into the ignition electrics behind the wheel, and connecting the wires to start the car.

That does fix the surface symptom: the client can drive the car. But it does NOT create a long-lasting impact because without you there, the car can’t be started. The client will need to rely on you every single time. Plus, more problems even arise (now he needs to fix the broken door lock too).

A much better approach is to find the root cause. What is the bottom-line reason causing the problem? Once we trace, find, and fix it, the problem will be gone for good.

In this example, the root cause is “the lost key”. We need to find its location!

Use ISSUE TREE to isolate potential root-causes into groups

There could be thousands of possible root-causes. How do we make sure every possible one is examined? If we are to list out all thousands and test one by one, there is simply not enough time. On the other hand, if we just list out some of the most “possible” ones, we run a high risk of missing the true root-cause.

This is where we need issue trees ! We would group possible root-causes into big groups. Those big groups will have smaller sub-groups and so on. All is done in the spirit of top-down and MECE. By doing this, we have an organized way to include all possible root-causes.

Continue with the example: A “bottom-up” approach to search for the car key is to go straight to specific places like the microwave’s top, the black jacket pocket, under the master bed, etc. There can be thousands of these possible locations.

The top-down approach is to draw an issue tree, breaking the whole house into groups and examine the whole group one by one. For example: first floor, second floor, and the basement.

Issue Tree only works if it’s MECE

What happens if we break down the search area into the First floor and East wing? The search area would not cover the whole house and there will be some overlapping which creates inefficiencies.

So for an issue tree to work properly, it has to be MECE – Mutually Exclusive and Collectively Exhaustive … which in simple language just mean 2 things: no overlap and no gap

How to draw MECE issue trees? Use FRAMEWORKS!

Each problem requires a unique issue tree. Coming up with MECE and spot-on issue trees for each problem can be really difficult. This is where “framework” helps.

Think of frameworks as “frequently used templates” to draw issue trees in any particular context. Many people use the word “framework” to refer to “issue tree” but this is conceptually incorrect.

We will talk about frameworks in more detail in the below chapters. You can also check out this deep-dive article on Frameworks.

Choosing which branch to go to first? Use HYPOTHESES!

So let’s say you have an issue tree of First floor, Second floor, and Third floor. Now what?

To make the problem-solving process even faster and more efficient, we use hypotheses. In simple language, it’s the educated guess of where the root cause may lie in. So we can prioritize the branch with the highest chance.

So let’s say, the client spends most time on the first floor, it’s where he/she most likely leaves the car key. Any consultant would hypothesize that the root cause is in the first-floor branch and go search there first.

Notice: hypothesis and issue tree always go together. It doesn’t make sense to draw an issue of First, Second, and Third floor and hypothesize that the key is in the East wing. Many times, hypotheses are even the inspiration to draw issue trees.

How to test a branch? Use DATA and compare it with BENCHMARK

Now that we decide to test the branch “First floor”, how do we do that?

We prove or disprove our hypothesis by collecting DATA. That data is then compared with benchmarks to shed more meaning. Two main types of benchmarks are: historical and competitive. For example, let’s say by some magic, the client has a metal detection machine that can measure the metal concentration of any space.

To test the “first-floor” branch, the consultant would come to the first floor, measure the metal concentration and compare it with the data before the car key is lost, a.k.a: historical benchmark.

If a hypothesis is true, drill down; if it’s false, go sideways

What happens when we test a hypothesis?

Assuming that we have access to enough data, it either gets proven TRUE or proven FALSE. How do we proceed from here? 

• Proven True: go DOWN the issue tree to sub-branches! Let’s say the metal detector identified the key IS indeed on the first floor. Go deeper. Draw sub-branches of that first-floor branch and repeat the process.
• Proven False: go HORIZONTAL to other big branches! Let’s say the metal detector denies the key presence on the first floor. We then can cross out this branch and go test others, a.k.a: the second and third floor.

Test, Sleep, Test, Repeat … until the ROOT-CAUSE shows up!

Once identified the ROOT-CAUSES, go for SOLUTIONS

With all proven root causes identified, the last step is to come up with solutions to kill the problem … and we are done! There can be multiple solutions to each root cause. These solutions should attack straight to the root cause.

Case interview questions – Interviewer-led cases

While candidate-led cases are all about the logical foundation of problem-solving, interviewer-led cases are more about tackling each individual question itself. The structure of the whole case is relatively loose and flexible.

In this chapter, we touch on some of the most popular ones. You can read in-depth about each in this designated article.

Framework/Issue Tree questions

“Which factors would you consider when tackling this problem?”

This is one of the most popular question types in case interviews, often asked in the beginning. It comes with several shapes and forms, but the real meaning is always: “Give me the bloody issue tree!”

So how do you tackle it? Just like in candidate-led cases. Take a timeout; brainstorm about the problem and how it should be broken down into; plug a few frameworks to see how it looks; and go for the most appropriate issue tree.

Unlike in candidate-led cases where you only present the upper-most layer, here you should walk the interviewer through the whole issue tree, covering at least 2 layers. Interviewer-led cases are much less interactive. It’s more like they ask you a question, and you deliver a comprehensive and big answer. They ask you another one. And so on.

Market-sizing / Guesstimate questions

“How many face masks are being produced in the whole world today?”

This is among  the most popular question types and you will likely face a few of them throughout several interview rounds. These questions ask you to “guess” and come up with number estimations in non-conventional contexts. These questions are called “Guesstimate”.

When a guesstimate question asks you to “guess” the size of a market, it’s called a “Market-sizing” question. Though this variation is very popular in consulting, the nature is nothing different from other Guesstimate questions.

It can be intimidating to face a question like this. Where to start? Where to go? What clues to hold on to?

The key is to understand that you don’t have to provide an exact correct answer. In fact, nobody knows or even cares. What matters is HOW you get there. Can you show off consulting traits, using a sound approach to come up with the best “estimate” possible?

Read the designated article on this for great details. Here, let’s walk through the 4-step approach that you can apply to absolutely every market-sizing question.

Step 1: Clarify

Make sure you and the interviewer are on the same page regarding every detail and terminology, so you won’t be answering the wrong question.

Step 2: Break down the problem

Break the item in the question (number of trees in Central Park, market size of pickup trucks) down into smaller, easy-to-estimate pieces.

Step 3: Solve each piece

Estimate each small piece one at a time; each estimation should be backed by facts, figures, or at least observations.

Step 4: Consolidate the pieces

Combine the previous estimations to arrive at a final result; be quick with the math, but don’t rush it if you aren’t confident.

Math questions

“If the factory can lower the clinker factor by 0.2, how much money will they save on production cost?”

Almost all cases involve some math. So you will face math questions for sure. These “questions” can go at you either explicitly and implicitly. Sometimes, the case interviewer will ask out loud a math problem and have you solve. But sometimes, you have to do multiple calculations on the background to push the analysis forward.

Either way, a strong math capability will help you a lot during cases and the future career in consulting. See this Consulting Math article for more details.

Chart insight questions

“What insights can you draw from this chart?”

Consultant works with data and a big chunk of those data are presented by charts. Many times, the interviewer would pull out a sanitized exhibit from an actual project and have you list out insights you can see from it.

There are many types of charts. Getting yourselves familiar with the most popular ones is not a bad idea.

• Bar charts simply compare the values of items that are somewhat parallel in nature.

• Line charts illustrate the continuous nature of a data series, e.g: how my heart rate evolved through time.

• Pie charts illustrate proportions, i.e “parts of a whole” analyses.

• Scatter-plots use data points to visualize how two variables relate to each other. Correlation for example.

Tips on tackling chart-insights questions:

1. Read labels first: from Chart titles, Axis titles, Legend titles, etc. Don’t jump straight to the content of the chart. It takes more time to get lost there and has to go back to read the label. Besides, you may also run a risk of misunderstanding the content.

2. Look for abnormalities: important insights always lie in those unexpected and abnormal data. Look for them!

Value proposition questions

“What factors does a customer consider when deciding which car insurance company to buy from?”

In simple language, this question type asks you: what do the customers want? Understanding exactly this need will put any company in the best position to tailor products/services.

Like any other questions, Value-proposition questions are not only about correctly identifying customer preferences (insights) but also about analyzing and delivering the answer in a structured fashion. Here are a few tips for you to do that:

How to be more insightful: 

• It always helps to break customers into groups and provide different substances for each.
• Put yourselves into the customers’ shoes. Think from the first-view perspective and more insights will arrive.
• If there is any data/ information previously provided in the case, definitely use it.
• A library of factors? Safety, speed, convenience, affordability, flexibility, add-on services, durability, fashion, ease of use, location, freshness, etc.

How to appear more structured:

• Follow this structure: Customer group 1, Customer group 2, etc. Under each: Factor A, factor B, factor C.
• Develop your personal script for this question type. Make sure it’s easy to follow and structured in nature.

Information questions

What kind of data do you need to test this hypothesis? How do you get data

Consulting is a data-driven industry. As consultants, we spent most of our time gathering and presenting data to clients ( see the What the heck does a consultant do video ). No surprise information questions are relatively popular in cases.

The best way to tackle this question type is to understand inside out the types of data actual consultants use in real projects. Because almost no candidate knows about this. This is also a very quick way to build rapport. The interviewer will feel like he/she is talking to a real consultant.

Case interview example video – Pandora case

Enough theory! Enough cute little illustrations here and there. Time to get our hands into a serious case interview example.

Notice the following when watching the video:

• How the problem is given and clarified
• How the problem-solving approach is layouted and executed
• How the candidate use wording and frame the pitches
• The dynamic of a case. How energy transfers from one to another person.

Every case is unique in its own way but principles are universal. The more examples you see, the better. This video is extracted from our  Case Interview End-to-end Secrets program, where you can find 10 complete examples like this and many other supplement contents.

How to prepare for case interviews

Case Interview preparation is a long and tough process. In an ocean of books, videos, programs, how do we navigate to maximize learning? Most materials floating around are quite good, at least in terms of substance. But the timing and the organization of them can be confusing.

• Too much theory in the beginning can burn brain power very quickly.
• Tackling cases without basics can develop bad habits, which eventually cost more time to unlearn.
• Practicing complicated (or even just normal) cases in the beginning can destroy morale drastically.

So a good study plan is constantly switching between 3 activities: reading theory, watching examples, and practicing, with cases increasing difficulty level. It’s so crucial to start with super easy cases, be patient, and stay on that level until you are ready to move up. There are so many skills, habits, and scripts to develop and these take time.

“The quickest way to do just about everything is … Step by Step”

Even for candidates with cases coming up urgently, I still strongly recommend spending the most valuable time practicing cases that match your level. After all, cases are just the context. What you will be evaluated on is your approach, your skills, your techniques, etc.

So, this is a sample study plan you can adopt for yourselves:

Step 1: Learn the basics of case interview theory

• Read this article thus far
• Watch this  Case Interview 101 video

Step 2: Watch a simple case interview example

• Read the sample case flow above.
• Watch this  Case Interview Example video
• Go to this list of free case examples and try to select a very simple one. If you can’t follow one, it’s probably not good for you. Just skip it.
• Watch the first example in the  End-to-end Program

Step 3: Review the theory of case interview approaches  

• Read deeply about the logical foundation of problem-solving in this BCG & Bain Case Interview article.
• Watch intensively the logical foundation of problem-solving in this Candidate-led cases video.

Step 4: Do one mock case interview

• Practice with consultants. They have the insight and knowledge to help you pass the interview. Discover our experienced coaches from McKinsey, BCG and Bain here .
• Find a partner to practice with. Make sure you both watch this  Guide on how to conduct a case. A bad coach can do more harm than good.
• Get your hand on another example in the  End-to-end Program. But this time, don’t just watch. Actively solve the case as you see it! Try to say out loud your version, then listen to the candidate, then hear the feedback!

Step 5: Start improving your business intuition

Business Intuition is like your natural sense of the business world: how to be insightful and creative in various business contexts, how to feed the “content” into your approach, etc. Think of this as a basketball player trained for muscle strength, agility, or durability. Intuition can be improved gradually through constantly exposing yourselves to a wide range of business situations and contexts.

You can do this by:

• Read consulting publications. One article per day for example. Three wonderful sources are: McKinsey Insights, BCG Perspectives, and Bain Publications
• Train  case interview questions individually. By isolating each part of the case, you can focus more on the substance. Hit that link or get more question training on the End-to-end Secret Program .

Step 6: Start training consulting math

• Visit this in-depth consulting math article.
• Train our  Mental Math methodology.

Step 7: Practice another mock case interview

At this stage, please still stick to very basic cases. The goal is to see all of the knowledge and skills above in real action. Again, this can be done by either:

• Book a meeting with coaches
• Find another partner to practice with. Just make sure you both watch this Guide on how to conduct a case. A bad coach is always more harmful than not practicing at all.
• See another example in the End-to-end Program. Like the previous one, try actively solving the case as you see it! Say out loud your version, then listen to the candidate, then hear the feedback!

Step 8: Equip yourself with tips, techniques, and advance theory

• Read on! The below chapters of this very article will provide you with more advanced theory and killer tips.
• Watch the whole Tips & Techniques sections of the End-to-end Program. You will find 10 examples with clear walkthroughs of tips and techniques right in the middle of real action.

Step 9: Do further mock cases, review, and improve

Practicing for case interviews is a time consuming process – but as long as you have the right method, you will make it!

• First, brush up on knowledge related to case interviews with the Case Interview End-to-End Secrets Program .
• Second, get personalized practice with ex-consultants. That way, you’ll receive clear and tuned feedback to understand what to improve, building your own proper case approaches.  See a list of experienced coaches here .

Stay tuned with us on this website and our Youtube channel for continuously updated information on case interviews and management consulting recruitment; you can also subscribe to the newsletter below for free materials and other insightful content!

Good luck with your case prep!

Case interview tips – With instant results

Imagine a case interview just falls out of the sky and into your lap, scheduled for tomorrow – how can you even prepare?

The answer lies in a few “quick and dirty” tips, which I’ll share with you in a moment.

I am a firm believer in the 80-20 rule – which states that 20% of the causes lead to 80% of the consequences.

In the case interview prep context, 20% of your learning efforts will bring about 80% of the improvements – so the key to instantly and dramatically improving your case performance is to identify and focus on that 20%.

In the next 8 chapters, I’ll tell you the killer tips and tricks that helped me get a McKinsey offer, the majority of which were previously only available in the premium End-to-End Secrets Program , including:

• Chapter 9: Delivering the perfect case opening
• Chapter 10: Remaining absolutely structured throughout the case
• Chapter 11: Taking the best notes
• Chapter 12: Getting out if stuck
• Chapter 13: How to ask for data
• Chapter 14: What to do when receiving data
• Chapter 15: Deliver the most convincing closing pitch
• Chapter 16: Developing your personal scripts

One thing before you proceed: don’t forget to learn the fundamentals, the question types, and the frameworks. Remember, these 20% tips can only get you 80% performance; if you want 100%, there’s  no substitute for hard work.

How to deliver the perfect case opening

The result of a case interview is determined  the first 3 minutes – and I’m not even exaggerating.

Most people will be put off by this fact – indeed, with all those efforts spent on learning for the later part of the case, and the hiring decision is made when you’re not even properly warmed up yet.

However, putting a spin on it, this is the 20% to focus on – if you nail the opening, you’ll make a better impression than most candidates; it’s also easier to perform well in 3 minutes than in 30 minutes, especially when the case hasn’t gotten tricky. Additionally, you can prepare the opening in a formulaic manner – essentially learning by heart until it becomes natural.

There are 7 steps in the perfect case opening formula:

1. Show appreciation

2. Announce case introduction

5. Announce case approach

7. Ask for a timeout

In this chapter, I’ll walk you through each of those steps.

Step 1: Show appreciation

The quickest way to score the first points with any interviewer is to  sincerely compliment them. Everybody loves compliments.

Case interviewers are not dedicated HR staff, but Engagement Managers, Partners, and Directors who conduct interviews ON TOP OF their projects as goodwill for the firm, so you should at least be thankful for the time they spend with you.

Begin your interview with a sincere “thank you” for the interesting case (if you have to fake these words because deep down you don’t like case interviews, you aren’t exactly cut out for the job).

Step 2: Announce case introduction

Announce you’re going to do  steps 3, 4, and 5.

This step is related to what I call the “map habit”, which I’ll describe in detail in the next chapter. For now, just understand that it  helps the interviewer follow your introduction, and shows you’re a structured person.

Step 3: Recap  

What is the key question of the case?

On a side note: one common mistake is to mix up step 3 with step 4 (clarify) – remember, don’t ask anything , just rephrase the case to ensure that you get it right.

Step 4:  Clarify

Ask questions to clear up any  potential confusion about the details of the case.

Case questions are always very short with a lot of vague details; if you don’t see the need to ask anything, you’re doing it wrong.

Run this checklist through your mind to help you clarify as many unclear points as possible:

• Definitions: are there words you don’t understand or can be interpreted in multiple ways?
• Timeframe: what is the “deadline” for solving this problem?
• Measurement: how are the important variables (performance, revenue, etc.) measured?

Additionally, number your questions so it’s easier for you and the interviewer to keep track.

Step 5: Announce case approach

Roughly sum up  how you’ll analyze the problem.

Again, this is related to the map habit, which makes the overall case progress easier to follow.

There are 3 types of cases: (1) problem-solution, (2) should I choose A or B, and (3) how to do C. For each type, there is a different approach. The latter two are discussed in the “Advanced Logic” chapter, for now, we’ll continue with the first type: tell the interviewer you’re going to find the root cause to ensure long-lasting solutions, and to do that you’ll develop an issue tree.

Step 6: Align

Check if the interviewer  approves of your case approach.

This is an important habit of real consultants  because nobody wants to waste resources going in the wrong direction; interviewers expect candidates to show it in the case interview.

Simply ask “Does this sound like a reasonable approach to you?” – most likely the interviewer will give you the green light, but if you’re lucky he/she may even suggest a better approach.

Step 7: Ask for timeout

After you’ve gone continuously through the 6 steps above, ask the interviewer for timeout to (make this explicit) gather your thoughts and develop the first part of the issue tree.

Make the most of your timeout session, and keep it as short as possible. Any unnecessary silence will damage the impression and hurt your chances (refer to the End-to-End Program example in Chapter 6 to “feel” how awkward a lengthy timeout session is).

Case opening – Example script

Now it’s time to see how you can put all those steps into action!

Thank you for this very interesting case, I am really happy to get a chance to solve it!

The first step in solving any business problem is to make sure we solve the right one, so before diving into the problem, I would like to first recap the case, then ask a few clarification questions to make sure we’re both on the same page, and lastly announce my overall case approach.

So here is my understanding of the case:

• [facts regarding the client and situation]
• [key case question]

Does that correctly summarize the case?

<assume the interview confirms that your playback is correct>

Great, now I’d like to ask my three clarification questions:

• [question 1]
• [question 2]
• [question 3]

<wait for answers>

Thank you for the clarification. Is there anything else I should be aware of?

Thanks for all the insights. It’s great that we all agree on the key details.

For the overall approach to this case, to completely wipe out the problem for a long-lasting impact, we will need to find out the root causes of this problem. To do that I will try to break the problem down into bite-size pieces with issue trees, in order to quickly isolate the root causes inside the branches, then drill down accordingly to gather information until we can draw actionable solutions.

So before I go on to establish my first issue tree, does that approach sound reasonable to you?

<assumes the interviewer agrees with your approach>

It’s great to see that we’re on the same page regarding the key details as well as the overall approach to the case. I do need some time to gather my thoughts, so may I have a short timeout?

Being structured throughout the case

The high stress and large amount of information in case interviews make it easy for even the brightest candidates to derail from the objective or present in an unstructured manner.

I’ll be sharing with you my 3 most impactful tips for keeping the structure in case interview:

1. The map habit

2. Numbering your items

3. Sticking to the big problem

The map habit

It means regularly and explicitly checking where you are, and where you’re doing next.

I call it the map habit because it’s similar to using a map while traveling – pausing every once in a while to check your location, destination, and direction.

This habit gives you a sense of direction and authority while making it easier for the interviewer to follow your case progress. It also makes you sound organized and systematic – a definitive mark of management consultants – and the interviewer will love it!

You’ll see this habit a lot in our Case Interview End-to-End Secrets Program, where candidates would often pause at each key step during the case. Do the same thing in your own case interviews, and you’ll greatly impress the interviewer.

Numbering your items

A very easy and effective way to make your pitches sound structured is to number each item.

The formula is simple: “There are X items that I’m going to say; they are: No.1 … No.2 … No.3 …”

By now you may have noticed that I use this structure many times throughout this guidebook – it’s already quite effective in written language, but it’s even more impactful in spoken communications!

Having this numbering habit will make it very easy for the listener to follow your speech, and it creates an impression of MECE (even if content-wise it’s not MECE).

Sticking to the big problem

There are two ways to keep yourself on track  all the time in those high-stress case interviews

1. Occasionally check your position on the issue tree, and quickly get back on track if it seems you’re “derailing”. If this sounds like the previous map habit, you’re right, it is the map habit.

2. Take good notes, with the case question being written big and bold on top of your scratch paper. That way you’ll be reminded every few seconds.

That last point brings us to the next issue: how to take notes.

How to take notes in case interviews

The best notes for case interviews are always  clear-cut, structured, and relevant.

Even the smartest candidates suffer from seemingly silly problems in case interviews – forgetting data, messing up the numbers, getting stuck with frameworks, losing sight of the original objective, etc. And in the true management consulting spirit, I set out to find the root causes.

And looking back at hundreds of coaching sessions I did, I found one thing in common – none of those candidates could take good notes.

I’ll tell you precisely how I took notes to get a McKinsey offer; however, I hope that after this chapter, you can install the spirit of the method, not just the method itself.

So here we are, with the 3 groups of sheets laid out for the ideal note-taking:

1. Data sheets

2. Presentation sheets

3. Scratch sheets

Data sheets

Data sheets are used to store and process every piece of incoming data .

Try to draw tables for these sheets, because this not only makes the calculation process easier but also gives the impression that you’re a careful and organized person.

Also, remember to write only the results of calculations on this sheet, to keep it neat and tidy. Most of your calculations should be done mentally (see the article on Consulting Math for more details); if you really need to jot down the calculations, do it on the scratch sheets.

Presentation sheets

Presentation sheets are used to develop and present any “outgoing” content.

Your issue trees should be drawn on these sheets, along with the big-and-bold case question/objective right on top. When delivering your pitches, always turn around the presentation sheets so the interviewer can clearly read what’s on them.

As with the data sheets, avoid any messy “mid-process” drawings. Put them on the scratch sheets instead.

Scratch sheets

Scratch sheets exist to keep other sheets clean.

Ever felt irritated receiving a notebook full of correction marks? That’s exactly how the interviewer feels if you present with untidy notes. You should try your best to hide all the unorganized, messy parts of your thought process.

The scratch sheets provide a sanctuary for that unstructured part of yours – it’s okay to go all over the place for brainstorming, as long as you can organize the incoming resources and present in a systematic manner.

“I took the notes just as you instructed, but I still get stuck in cases. How can I avoid it?” – Well, that’s the subject for our next chapter – “Stuck” situations and how to get out of them.

Stuck in cases – What to do

We’ve all been there – that scarily awkward feeling when you don’t know what to do next in a case interview, that fear of being rejected.

In every “stuck” situation, the most important thing is to remain calm and collected (you’ll lose points if you panic) – then methodically work your way out. I’ll teach you how to get out of those situations, with style.

There are actually 3 different kinds of “stuck”, and for each, I have a different solution:

1. The “Framework” stuck

2. The “Data” stuck

3. The “I-Cannot-Find-The-Problem” stuck

Let’s go through each in detail.

The framework stuck

This situation happens when the candidate does not know which framework to use, and the secret tool for it, is “segmentation”.

Segmentation works just like any framework, and like a Swiss Army knife, it’s usually safe and easy to use. So if you’re unsure how to break things down, say these magic words:

“At this point, I’d like to break down this X item, and one good way is to use the natural segmentation within this line of business. So may I ask how they break this X item in this industry?”

If you get it right, the interviewer will reply with the most industry-relevant way to segment the item.

You may be wondering why I’m not talking about issue trees and frameworks here, after all the theory at the beginning of the guidebook.

The answer is that the textbook and “ideal” solution – learning the problem-solving fundamentals and deep-diving the frameworks to increase your flexibility – takes a lot of time, while the “cliched” solution – learning as many frameworks as possible, usually at the cost of depth – is inherently dangerous.

The data stuck

The “data stuck” happens when the candidate can’t extract relevant insights from the given data. And when this happens, ask for benchmarks.

Comparing with benchmarks is the quickest way to put data into perspective, yielding useful insights. There are 2 kinds of benchmarks – if you remember from the chapter on Candidate-led Cases: 

• Historical benchmarks: data on the same entity in the past
• Competitor benchmarks: data on similar/competing entities in the same timeframe

To ask for benchmarks, Just say the following lines:

“For now, I hypothesize that the root cause of the problem comes from the X branch of this issue tree. However, to further break down the problem in a spot-on way, I do need some information on the context of our client’s problem.

One of the quickest ways to grasp that context is to use competitor’s data; so can I have the X figure for our client’s competitors?”

The “I-Cannot-Find-The-Problem” stuck

This is the scariest “stuck” because there’s no obvious reason or solution – you’ve done your math right, your framework is suitable, and you’ve got a lot of interesting insights from data. Why are you still stuck?

From my experience in coaching sessions, there are 2 scenarios where this happens: (1) your issue tree is not MECE, and (2) if your issue tree is MECE, it does not isolate the problem.

You can try to avoid this in the first place by mastering the MECE principle, improving intuition, as well as aligning with the interviewer early and often.

But what if you still get stuck? The answer is to calmly admit you’ve hit a dead-end, and ask for time to fix the problem; be it the first or second scenario, you have to redraw your issue tree.

Literally use the following script:

“My whole analysis seems going towards a dead-end, which means either part of my issue tree is not MECE or my method of breaking down does not isolate the problem. Either way, I would like to take a timeout to have a look at it.”

You likely get stuck when practicing on yourself. That’s the reason why you need personal coaching. Veteran coaches at MConsultingPrep will give insightful feedback, propose actionable steps, and help you significantly enhance your performance. Find my coach !

How to ask for data

Data is the fuel for the case interview engine. Without it , your analysis can’t progress.

The problem is that interviewers don’t simply give out precious data for free. It has to be earned. There are 4 tips you can use to show that “worthiness”, and prompt the interviewer to supply you with the best information:

1. Create a good impression

2. Explain the purpose of the data

3. Explain the method of acquiring the data

4. Ask open-ended questions

Tip 1: Creating a good impression

The interviewer will love you if you think and act like a real consultant – if you can achieve that, he/she will always give you the best pieces of data available.

In this guidebook, there are countless tips to show your consulting characteristics – I even write a whole chapter on how to install consulting culture into your own personality. Generally, you must always be (1) structured , (2) fact-based, and (3) action-oriented.

Additionally, common people skills and interview tips also apply – show your appreciation by thanking for their help, keep a smile on your face to maintain a positive atmosphere, etc.

Tip 2: Explaining the purpose of the data

Say why you need that data, so the interviewer knows you can actually use it.

There are only two purposes for data in case interviews: (1) to test a hypothesis, and (2) to understand the context.

You can use the following scripts to when to reason your data requests:

“For now, I’m hypothesizing that the root cause of this problem comes from the X branch. Since this hypothesis can only be tested with the data on X, may I have those figures?”< testing hypothesis>

“For now, I hypothesize that the root cause of the problem comes from the X branch of this issue tree. However, to further break down the problem in a spot-on way, to better understand the context of our client’s problem, I will ask a few more questions. Does that sound reasonable to you?” < understanding the context>

Tip 3: Explaining the method to acquire the data

By stating how to get the data, you prove its feasibility and reinforce your data request.

In real consulting projects, data is not always available; the interviewer may rely on this logic and refuse to give you any information. So, when you ask for data, make sure your request is realistic, then state the method to acquire it using these words:

“If this was a real project, this information can be acquired from/by X source/method”.

In our  Prospective Candidate Starter Pack ,   there is a sheet listing all the possible sources of information in consulting projects, which you can download for your own use, along with many other free case interview materials.

Accurately explaining the data acquisition method also shows that you’ve done your homework and you know the consulting industry inside-out. Any interviewer will be greatly impressed.

Ask open-ended questions

This prompts the interviewer to give you data you haven’t thought of.

The precise questions mostly depend on specific cases (meaning you need to sharpen your intuition), but there is a Swiss Army knife here: “Is there anything else?” – which is a question real consultants ask several times a day, at the end of their conversations.

Use open-ended questions when you feel you might be missing something – for example, during clarification – and only after a series of well-defined, close-ended questions. Otherwise, you risk appearing lazy and over-reliant.

What to do when receiving data

Suppose the interviewer agrees to give you data. Now what?

Time to shine! If you do these following 3 steps, even just once, in the interviewer’s mind, you already pass:

1. Acknowledge the data and show appreciation

2. Describe the data, especially its notable features

3. State the implications of the data

Let’s dive into each separately.

Step 1: Acknowledging the data

Simply  thank the interviewer for the interesting piece of data.

Firstly, it confirms that you have received, and can understand the data.

Secondly, it’s always good to give out modest, subtle compliments to the interviewer. Trust me, conducting case interviews is hard work, and the interviewer does appreciate those little compliments.

Last but not least, it buys you a few seconds to fully absorb the new information and minimize any possible silence.

Step 2: Describing the data

Summarize  the most important insights you can extract.

Don’t recite a short essay about the data, there is no time for that. Quickly and mentally calculate all the important points, then state it out loud in 1-2 sentences.

This step has several uses:

It showcases your consulting math skills (chart insights and mental calculation)

It eliminates the silence during your analysis

It helps you quickly memorize the key trends in the data

Step 3: Stating the implications

Concisely explain how the insights from the data  related to the issue tree – do they confirm or reject the current hypothesis? Do they open new areas for investigations?

This part is extremely important because it connects to the action-oriented mindset of actual management consultants while laying solid foundations for your next steps (fact-based).

Example – Handling revenue data

Suppose you’re working on a profitability case (how to fix low profits), and you’re trying to dictate whether the root cause comes from the revenue side.

The interviewer gives you this data:

How would you respond? Try to answer it yourself before revealing the sample answer.

Sample Script - Receiving Data 

Thank you for the very interesting data. (acknowledging)

It seems that our client’s revenue has been increasing steadily throughout four years – around the mark of 20% annual growth, in fact. (describe the data)

This suggests that the problem may not come from this side of the issue tree. However, in order to fully reject the possibility, I need the figures on the revenue of other companies in this industry around this time. Do we have those numbers? (implications)

Delivering the perfect closing pitch

“You have one minute to summarize all of your findings to the client CEO. What would you say?”

Your answer must be short, to-the-point, action-oriented, and client-friendly.

The closing pitch of the case interview is sometimes called the “elevator pitch” , where you supposedly meet the client CEO inside the elevator and must somehow deliver the results of the project before the elevator arrives at its destination floor (it’s even worded like that sometimes).

Regardless of the wording, the principles remain the same, and your closing pitch must consist of these 4 parts:

1. Introduction / Lead-in

2. Summary of the root causes

3. Summary of the solutions

4. Next step

Part 1: Introduction / Lead-in

Open your pitch in a client-friendly way. Remember, consulting is a service – a premium one, in fact.

There is a simple formula for this part of the pitch:

“Mr. CEO, it has been a great pleasure to be working with you on your company’s X problem.”

Everybody loves a little compliment, don’t they?

Part 2: Summary of the root causes

Don’t go into detail about your analysis – show them the results first.

CEOs are busy people, they have no time for a 15-minute break-down of your issue tree. They only care about the “big picture” – “Why is the problem happening?”.

You need to sum up root causes in a structured manner, with a numbered list – in the case interview context, that’s one characteristic the interviewer looks for, and in real projects, it helps the listener follow your pitch.

“After careful analysis, we have found X root causes for the company’s problem: 1… 2… 3… X”.

Part 3: Summary of the solutions

The solutions are what the clients pay for in the first place, so make sure to deliver them clearly and systematically.

This step must also be structured. Additionally, list the solution in the same order as their corresponding root causes, to imply the connection between them (if the root causes are listed as A, B, C, then the solutions should never be C, B, A).

“To solve the aforementioned issues, we propose the X following solutions: 1… 2… 3… X”.

Part 4: Next step

The ending must lead the customer towards a follow-up project, in a client-friendly way.

This step shows that you have an action-oriented mindset and necessary people skills to represent the firm before the clients.

Moreover, follow-up implementation projects are a major source of revenue for the top consulting firms (such as McKinsey, BCG or Bain), so mentioning them in your case interview ending pitch proves that you did the appropriate research before applying.

So here’s what you’ll say when the elevator reaches the destination:

“We would be more than happy to work with you to implement these solutions”.

Develop personal interview scripts

Every tip I’ve mentioned in the previous 7 chapters is for recurring situations in case interviews, and they can be dealt with using formulaic responses.

What that means for you – the candidate – is that you can make personal scripts and learn them by heart until they all become your second nature. That will save you a lot of brainpower to use on the issue tree. This approach has proven successful with all of my coachees, and it’s also a major part of our Case Interview End-to-End Secrets Program. You will find my own personal script I used back in the day, and I will also personally give feedback to scripts of members of the program.

So open your document tool and start writing now. Once you’ve finished the scripts, learn them by heart one at a time. When you feel comfortable with every one of them, you can move up to a higher level and practice with whole cases.

Inside the case interviewer’s mind – Consulting culture

The best way to impress your consulting interviewer is to act like a consultant. And to do that, you need to know what goes on inside their mind – both the conscious and unconscious – then install it into your own personality.

In this chapter, I’ll guide you through 15 ingredients that make up a consulting mind. However, I won’t tell you how to apply this in case interviews because it will sound fake – what you need is to immerse yourself in a consulting environment, and incorporate these “ingredients” into your own mindset.

Responsibility & proactivity

Everyone talks about responsibility and proactivity these days, but in management consulting, we have a much more powerful word – “ownership” . When you “own” the work, you deeply and sincerely care about it, and you always try to go beyond what is required.

If you ever spend your efforts trying to improve a piece of work that your boss already approved, just because you know it is the right thing to do, because you feel so good seeing a job well-done, you have that “ownership” mindset.

In management consulting, you are expected to possess that mindset. In my early days at McKinsey, I was almost thrown out the window for working on a cement project but not knowing where the aggregate mines were (which was outside my responsibilities, but my boss expected me to know it, since I “owned” that cement project).

If you fail to do your work, don’t ever blame anyone or anything. Your responsibility is to draw up contingency plans for the “worst-case scenarios”:

• Missing the deadline because the client did not send you the data? You should have accounted for it in your schedule. 
• Late for work because of a traffic jam? Why didn’t you get up earlier?
• Your pet bite your suit? Any sensible person should have a spare one; even if that one is bitten, aren’t we paying you enough to get a new suit at the store this morning?

In short, if you want to be a consultant,  don’t make excuses.

Result-oriented / Can-do attitude

“There’s nothing I can’t do” – that’s the mindset you need to work in management consulting.

The result orientation inside a consulting firm is intense – saying that it’s “Mission Impossible” everyday would not be an exaggeration, but at the end of the day it’s always “Mission Accomplished”.

The boss doesn’t pay much attention to how you do a task, or what resources it takes, as long as you get it done. The firm has enough resources of every kind to help you with that, so there’s no reason you can’t pull it off.

Top-down communication

Communications made by consultants are always short, concise, to-the-point, action-oriented, and structured.

We were all given full-on lectures by our parents back when we were kids, for wasting food or not exercising (or not studying, for Asians like me). If they were management consultants, most of those lectures would be replaced with powerful, action-oriented messages: “Go study. If you don’t get an A+ for the next test, I’ll have to discipline you”.

A consultant seeing something non-MECE is like your mom seeing your messy bedroom. It’s that discomforting.

If you wish to be a consultant, train yourself to be MECE in everything you do. Once you can be MECE effortlessly, and you start spotting the annoying non-MECE-ness in everything around you, you know you’ve got it. 

If you’re unstructured, you won’t get into the business.

Being “structured” is a pretty vague concept, but everyone in the consulting industry knows when they see it. It’s about being organized, logical, top-down, MECE, etc.. Basically, if you can approach things the same way as real consultants, you will be deemed “structured”

If you can’t meet the deadline, you’re dead (of course, not literally).

A consulting firm works like the perfect machine, where every part operates as intended. When consultants promise to help you with something, you can be nearly 100% sure that they’ll keep their word. This makes work management that much easier.

Consequently, if you start missing the deadlines, you’ll be out of the game soon enough.

Manager from Day 1

You’ll get the idea right away if you watched this video on the job of management consultants:

In short, even as an entry-level associate, you’ll be managing a multitude of resources (experts, specialists, etc.), contents (reports, client data, expert knowledge,…), and stakeholders (the two most important being your client and your boss).

Pulling all of these together to create impactful results would be an impressive feat, even for the best and brightest new hires.

Client first

Don’t. Ever. Piss off. The client.

Management consulting is a special service industry – besides the usual “don’t disrespect the client” and “don’t leave a bad image of the firm”, there’s also “don’t make them hate you while telling them to do what they probably hate.” (which is a good way to sum up a consultant’s job).

In case interviews and PEIs, the interviewer will be asking himself a big question: “Can I trust this guy to represent me and my firm before the client?” – if the answer is anything below a stellar impression, you won’t be receiving an offer.

Consultants will have valid reasons for everything they do.

In both consulting work and case interviews, you need to be very explicit about the basis of your actions – every conclusion must have backing data, every idea must be explained, and every request must serve a purpose. Don’t ever assume that you’re justified.

Being fact-based is part of the foundation for the trust people place in consulting firms, so people who draw ideas out of thin air and act impulsively will never get into the industry.

Effective time & resources management

Every consultant works hard, so the only way to stand out is to work smart.

Yes, I know it’s a buzzword, and I know it’s cliched, but the 80-20 rule really does apply in this line of work. The best performers are always the ones to identify the most important lever and focus on it.

With the intense workload and up-or-out policy at major consulting firms, this skill is vital. Don’t be surprised if you pull all-nighters and work hard all the time but still get fired, while that one guy who goes home at 5 gets promoted. If you want to survive, learn from him.

Key takeaways & key messages

To a management consultant, everything has a key takeaway.

Consultants are efficient people, they don’t simply waste time, effort, and resources on irrelevant things. Things are only worthy of their attention if they have an interesting, helpful “so what”:

• You tell a story? So what?
• You perform a data analysis? So what are your key insights, and what’s the implication?
• You draw a slide? What’s the key message you’re trying to deliver?

If you already think like this, trust me, the interviewer will love you.

Think on your feet first

You should only ask for leadership assistance only  after you’ve thought well about the problem.

Just pause for a second and think: would you be more ready to help someone who really tries their best at the job or someone who does nothing and relies solely on you?

The same thing is true in consulting work, and even in case interviews: the interviewer will assist you if you can deliver well-informed opinions.

With that said, “asking without thinking first” is a very common mistake in case interviews, which you can see in the numerous examples from our End-to-End Secrets Program. 

Align early, align often

Always try to reach and maintain a consensus with co-workers and your boss, from the most mundane tasks to the largest projects.

Nobody wants to spend a whole week building a model that the team doesn’t need; it’s a huge waste of time and resources. As such, consultants have this aligning habit very early and often – a little time spent on reaching an agreement now will save a lot of trouble later.

Remember to align in case interviews as well – at the start of the case, and every important step.

Consultants are very action-oriented people who always think about the next step.

Every meeting, phone call, even random catch-up must end with everybody being explicitly and absolutely clear about what to do next.

So what’s YOUR next step, after reading this guidebook?

Six types of charts in case interview are: Bar/Column chart, Line chart, Percentage chart, Mekko chart, Scatter plot chart, Waterfall chart.

Business knowledge is not a mandatory condition to become a consultant. Nevertheless, it still has specific obligations and advantages for consultants.

There are 9 type of questions that mostly used in actual case interviews. Each type has a different solution, but you can rely on the a 4-step guide to answer

Related product

Case Interview End-to-End Secrets Program

Elevate your case interview skills with a well-rounded preparation package

Access all the online resources you need for success in your case and fit interviews.

Build a successful application with our step-by-step resume advice videos, examples, and templates.

• Resources home
• Applications
• Interview tips
• Management consulting industry guide
• Top routes for joining McKinsey, BCG and Bain in 2023
• The top-10 management consulting firms
• How to practice case interviews alone
• Tips for last-minute case interview prep

Thank you for your review!

Free interview prep material in your inbox

WHAT'S INCLUDED?

You're subscribed!

What’s included?

28 emails packed with tips. 8 full cases with solutions (incl. FlashFash). Plus sample case and fit interview videos.

Case Interview: The Free Preparation Guide (2024)

The case interview is a challenging interview format that simulates the job of a management consultant , testing candidates across a wide range of problem-solving dimensions.

McKinsey, BCG and Bain – along with other top consulting firms – use the case interview because it’s a statistically proven predictor of how well a candidate will perform in the role. The format is not only used by management consulting firms. Other types of organizations – like tech companies, financial services institutions, and non-profits – often use case interviews to assess candidates who are interviewing for roles focused on shaping strategic initiatives.

If you’re preparing to face a case interview, you may be feeling a little apprehensive. The format is notoriously demanding and unlike any other type of recruitment assessment you may have experienced before. However, with the right preparation and investment of time and effort, it is possible to master.

In this guide, we break down everything you need to know about the case interview, outlining exactly what you need to do to prepare effectively and ace the case.

Key takeaways

• The classic case interview format follows the same steps that a management consultant would encounter on a client project. The interview is a little like a role-play where the interviewer plays the role of a client and the candidate plays the part of the consultant hired to solve the problem.
• Some firms occasionally deviate from the classic case interview format. Popular alternatives include written case studies – which require candidates to review paper documents and then prepare and deliver a presentation – and market sizing case interviews, which require candidates to estimate a number.
• Case interviews test candidates against a set of six problem-solving dimensions: structuring, math, judgment and insights, creativity, synthesis, and case leadership. The interviewer uses a scorecard to assess the candidate’s performance in each of these areas.
• Case interview questions can be about almost any type of challenge or opportunity. However, our research indicates that there are 10 types of questions that are asked most frequently at top consulting firms. These include questions on profit improvement, revenue growth, and market entry.
• To do well in a case interview, it’s vital to create custom interview structures that meet the conditions of the ‘AIM’ test. It helps to have a good working knowledge of key case interview frameworks, but this alone is not sufficient.
• A strong grasp of case math is also crucial when it comes to case interview performance. While only high-school level math skills are required, it’s an aspect of the case interview that many candidates find challenging.
• Successful candidates are able to summarize their findings effectively. They also demonstrate strong case leadership by progressing through the case proactively and remaining focused on its overarching objectives.
• To prepare for a case interview, it’s essential to learn every problem-solving skill that will be assessed. We teach all of these skills in our Interview Prep Course , which contains all the video lectures, sample interviews, case material, and practice tools you’ll need to ace any case interview.
• Most candidates who go on to receive an offer from a top consulting firm like McKinsey, BCG or Bain complete at least 25 live practice sessions with a partner before their interview. You’ll find over 100 high-quality cases in our Case Library and a diverse community of candidates available for practice in our Practice Room .
• Some candidates choose to supplement their preparation by working with a coach who has been an interviewer at a top consulting firm. Here at CaseCoach, our coaches have all been handpicked from the alumni of top firms such as McKinsey, BCG and Bain.
• Although the world’s top consulting firms all test candidates using similar methods, none of them approach the interview process in exactly the same way. If you’re preparing to interview at a top consulting firm, it’s important to do your research and find out what you can expect.

An introduction to the case interview

The case interview format, the classic case interview.

The vast majority of case interviews follow the same steps that management consultants encounter on real client projects.

• Brief: The interviewer gives the candidate a brief for the case. They explain the context in which the client is operating, and outline the challenge they’re facing.
• Clarification: The candidate then has the chance to ask clarifying questions. They might do this to ensure they’ve understood the context of the problem correctly or to confirm the client’s goals.
• Reflection: The candidate takes 60 to 90 seconds or so to reflect and lay out a structured approach to solving the case.
• Analysis: The candidate and interviewer then work through the case together, carrying out analyses and moving toward a recommendation. This is the part of the case where you’ll be handling numerical questions, reviewing exhibits, coming up with creative ideas, and so on. It comprises the vast majority of the time you’ll spend on the case.
• Synthesis: The case concludes with the candidate synthesizing their findings and making an overall recommendation to the client.

So what does this unique interview format look and feel like? In reality, a consulting case interview is a little like a role-play. The interviewer plays the role of a manager or client, and the candidate plays the part of the consultant hired to solve the problem. However, a case interview shouldn’t feel like a performance. The most successful candidates treat it as a natural conversation between two professional people.

In the video below you can see an example of exceptional case interview performance in action. The candidate and interviewer in the video are both former McKinsey interviewers.

Interviewer-led vs candidate-led cases

Although the classic case interview has an established format and assesses a specific set of skills, cases can be delivered in different ways. Some are more candidate-led, while others are more interviewer-led

In a candidate-led case, the candidate is in the driver’s seat and is free to explore different aspects of the problem. Interviewers don’t tell candidates what to focus on next. Instead, they provide additional information – like an exhibit or a new fact – when asked. The candidate then analyzes the information and suggests next steps to get to the answer.

In an interviewer-led case, the interviewer may interrupt the candidate and ask them to either perform a specific investigation or focus on a different aspect of the problem. This doesn’t mean the interview is going badly; the interviewer is simply following a script. As a result, in an interviewer-led case, candidates are less likely to take the wrong path.

It’s difficult to predict which style of case you’ll receive. Some firms are known for using one style of interview more frequently than another. However, in practice, most interviews fall somewhere between the two extremes, depending on the style of the interviewer and the case material they’re using. You should therefore always be ready to suggest next steps and have a view about how to get to the answer.

Other case interview formats

While the classic case interview is most common, there are a couple of other interview formats that top consulting firms use from time to time:

The written case study

Some management consulting firms use written case studies to simulate the experience of carrying out consulting work even more accurately than the classic, verbal case interview. In some locations, BCG and Bain have been known to adopt this approach for a small minority of candidates.

In written cases, candidates review a series of paper documents and then structure the problem, run some numbers, generate ideas and, finally, deliver a short presentation. You can learn more in our article on how to crack written case studies .

Market sizing case interviews

Management consulting firms and other employers sometimes use market sizing questions – also known as estimation questions – as a standalone interview format to assess candidates on a wide range of problem-solving dimensions.

In a market sizing interview, you’ll be asked to estimate a number. This might be something like the revenue of a sandwich store or how many ATMs there are in a certain city. The ability to size a market is also a skill required for solving many case interview questions. You can learn more in our article on how to nail market sizing case interviews .

Some key differences to expect

While case interviews are highly codified, it’s important to remember that every interview is unique.

In the final round of interviews, for example, cases may feel less scripted than they did in the first stage. Partners – who are part of the interviewing group in the final round – often use the same case for years at a time. This means they can deliver it without a script and, as a result, tend to give candidates more room to take the lead. You can learn more in our article on the differences between a first and final-round interview at McKinsey, BCG and Bain .

In addition, each firm or office might bring their own nuance or style to the classic case interview format. It’s important to do your research and find out what you can expect from the interview experience at your target firm or office. You can learn more in our article on how the interviews at McKinsey, BCG and Bain differ .

The skills assessed in case interviews

Case interviews are primarily about testing a set of problem-solving skills. The interviewer uses a scorecard to assess a candidate’s performance in the following dimensions:

• Structuring: This is the ability to break problems down into logical drivers. It’s most obviously required at the beginning of a case, where you can pause and take a moment to come up with an approach. But it’s also tested each time you have to consider a new aspect of the problem.
• Math: Most cases contain a quantitative component, such as estimation questions, break-even questions, or other calculations. To do well in this dimension, you need to lay out a clear and efficient approach, run calculations quickly and accurately, and then state their implications for the case.
• Judgment and insights: This dimension is about extracting insights from data, usually by interpreting information in a chart. Performing well in this area involves processing new information quickly, prioritizing what’s important, and connecting your findings to develop sound recommendations.
• Creativity: Cases often have a creative thinking component. Sharing numerous, varied and sound ideas – ideally in a structured way – can help you succeed here.
• Synthesis: This is all about wrapping up the case with a clear and practical recommendation, and delivering it convincingly.
• Case leadership: This dimension is about progressing through the case efficiently and staying focused on its objectives. Case leadership involves gathering facts effectively and building on new findings to develop a recommendation. It’s a particularly important dimension in candidate-led cases.

Questions to expect

If you’re preparing to interview at a top management consulting firm like McKinsey, BCG or Bain, you’re probably curious about the kind of case interview questions you can expect to receive.

To identify the most common case interview questions , we surveyed CaseCoach users who interviewed at either McKinsey, BCG or Bain for a generalist role in 2023. We found that of the 260+ case interviews reported by respondents:

• 20% focused on profit improvement
• 15% focused on revenue growth
• 12% focused on market entry
• 10% focused on cost cutting
• 9% focused on process optimization

These topics align with the typical challenges and opportunities faced by CEOs. Because the job of a management consultant is to help CEOs find solutions to these problems, it’s vital for candidates to demonstrate that they understand the issues behind these questions.

However, while there are some recurring topics, the context and nuances of each individual case mean that no two case questions are the same. Increasingly, firms are testing candidates on questions that fall outside of these recurring topics. One way they’re doing this is by focusing on non-traditional areas, like the public sector. If you’re interviewing for a generalist management consulting role, it’s therefore important to be ready for almost any type of case question.

If you’re interviewing for a role that’s focused on a specific industry or function, like financial services , you’ll likely be given a case focused on that particular area.

How to ace the case

Case interviews require you to think on your feet to solve a complex problem that you’ve never seen before, while being assessed against a number of problem-solving dimensions. Here’s what you need to do to rise to the challenge and ace the case:

1. Create case interview structures that meet the AIM test

Of all the case interview assessment dimensions, structuring is perhaps the most challenging, particularly for those who are just starting out. It requires candidates to propose a prioritized and insightful approach to the case that’s composed of a comprehensive set of independent drivers. Structuring plays a foundational role in the interview, setting the course for the entire conversation.

So, what does good case structuring look like? An effective structure should meet the conditions of the ‘AIM’ test. ‘AIM’ stands for:

• Answer-focused: The structure should identify the client’s goal and the question to solve. It should also provide an approach to answering that question.
• Insightful: The structure should be tailored to the specifics of the client or to the problem in question. You shouldn’t be able to apply it to another case of the same type.
• MECE: This is a well-known acronym among consultants. It stands for ‘mutually exclusive and collectively exhaustive’. In plain English, if a structure is ‘MECE’ it has been broken down into an exhaustive set of independent drivers.

2. Know key case interview frameworks

In a case interview, you’ll be asked to structure a variety of problems. There are a number of frameworks that can help you do this, whether the problem you’re structuring corresponds to a common case question or a different topic entirely:

Business frameworks

You can use established business frameworks to craft custom structures for the most common types of case questions. These include frameworks for mastering profitability questions , answering revenue growth questions and nailing market sizing questions .

Academic frameworks

For unusual case questions that don’t relate to an obvious business framework, it can be helpful to draw on an academic framework like supply and demand, ‘the three Cs’, or Porter’s Five Forces. You can learn more about all of these in our ultimate guide to case interview frameworks . The article includes other business and academic frameworks that you can use to craft custom structures for case questions.

Logical frameworks

Finally, logical frameworks can help you look at the big picture in order to structure your approach. These options can be particularly useful when you’re faced with an unusual case question that doesn’t lend itself to a business or academic framework. Some examples of logical frameworks include:

• Structuring with equations: This approach is most helpful for quantitative case questions. Listen out for introductions that focus on a number. These cases can often be broken down into an equation and then structured along its variables.
• Structuring based on hypotheses: This approach is most helpful for structuring qualitative cases. It involves laying out what you most need to believe in order to validate a specific recommendation. These beliefs form your set of key hypotheses, which you then test as you progress through the case.
• Structuring with root causes: This approach works well for structuring cases that require identifying the reasons for a problem. It involves laying out its potential causes in a way that is mutually exclusive and collectively exhaustive (i.e. MECE).

How to apply these frameworks

While business, academic, and logical frameworks can be helpful when it comes to structuring a problem, learning how to use them correctly is a skill in itself. Simply applying a framework to a case interview question in a ‘cookie-cutter’ fashion is not enough. To impress your interviewer and pass the AIM test, your structure will need to be heavily tailored to the situation at hand. In fact, many case questions can be best answered by combining different frameworks.

Ultimately, interviewers want to understand how your mind works and see you think on your feet. You’ll therefore need to demonstrate that you can propose a custom case interview structure to any question.

3. Be comfortable with simple math

Management consulting firms expect you to navigate mathematical problems confidently and reliably in case interviews. Regardless of your academic background or past experience, you’ll need to be able to set an approach to solve the problem, perform calculations quickly and accurately, and state the implications of your solution.

The good news is that you’ll only be required to demonstrate a high-school level of math skills in case interviews. However, with no calculators allowed and an interviewer looking over your shoulder, it’s natural to find this aspect of the experience a little intimidating.

So, what can you expect from case math? The problems you’ll be asked to solve may take the form of straight calculations, exhibits that require calculations, word problems, and estimation questions.

To do well in this part of the case interview, you’ll need to have a strong understanding of:

• The four operations: addition, subtraction, multiplication, and division
• Key math concepts such as fractions, percentages, and weighted averages
• Business math concepts such as income statements, investments, and valuations

To stand out to your interviewer, you’ll also need to work through math problems confidently and efficiently. Here are our top tips for doing this:

• Keep track of zeros: Case questions often involve large numbers, sometimes in the millions or even billions. Keeping close track of your zeros is therefore crucial. We recommend either counting the zeros in your calculation, using scientific notation, or assigning letter units to zeros.
• Simplify your calculations: This will help you work through problems quickly and efficiently while reducing the potential for mistakes. One way of simplifying calculations is by rounding numbers up or down to make them more ‘friendly’.
• Memorize frequently-used fractions: Some fraction values are used so frequently in case math that knowing them – along with their percentage value and decimal conversions – can save you significant time. We recommend memorizing the fraction and corresponding percentage and decimal values of 1/2, 1/3, all the way through to 1/10.

You can learn more in our guide to mastering case interview math .

4. Summarize your findings

Synthesis is a key skill assessed by interviewers, predominantly at the end of a case interview. You need to provide a clear and sound recommendation that answers the overall question convincingly. You must also describe the key supporting points that informed your recommendation and then outline any further steps you would advise the client to take.

When it comes to concluding cases effectively, this four-step framework can be extremely helpful:

• Quickly play the case question back to your interviewer.
• Answer the question directly and briefly by distilling your response into a single sentence, if possible.
• List the points that support your conclusion.
• Outline the next steps that you recommend to the client.

You can learn more in our article on how to conclude a case study interview .

5. Bring it all together with strong case leadership

Case leadership, more than any other dimension, will give your interviewer an indication of how independently you could handle your workstream as a consultant. It’s a particularly important skill in candidate-led cases, where you’ll set the course of the discussion without the interviewer steering you in a particular direction.

Demonstrating strong case leadership means progressing the case efficiently and staying focused on its overarching objectives. Using a ‘tracker page’ to capture your structure and organize your notes throughout the case will help you in this regard.

Another aspect of case leadership is gathering facts effectively. This includes making reasonable assumptions, requesting missing information, and asking probing questions.

Finally, you’ll be expected to build on new findings to develop your recommendation, adapt your approach, and suggest next steps.

Effective case leadership is all about showing your interviewer that you have a strong command of the problem-solving process. After investigating each key driver in your structure, you need to be able to articulate where you are in your overall approach to solving the problem, and what the next steps should be.

To do this, we recommend using a five-step process to handle every kind of analysis you conduct during the case, whether you’re responding to a numerical question, the data in an exhibit, or something else.

Here’s what that five-step process looks like:

• Set your approach. Define what you’re going to do upfront. It’s particularly important to be explicit here, especially if the analysis is in any way complex or ambiguous.
• Conduct your analysis. Your approach here will vary according to the kind of question you’re working through.
• State your findings. You may also want to make a note of your findings on your tracker page.
• State the implications of your findings. Explain how they impact both your answer to the question and the client’s broader goal.
• Suggest next steps. Your findings will sometimes change how you want to approach the rest of the case. This may mean altering your initial structure and editing it on your tracker page.

6. Be your best on the day

When the day of your interview comes around, you’ll want to be at your very best. But what exactly does this mean?

First, you should present yourself in a professional manner. It goes without saying that you should arrive on time but, ideally, you should plan to arrive early. You should also come equipped with the right material: a pen, squared A4 or letter-size paper pad, and copies of your resume. It’s also vital to dress appropriately for the occasion. Usually, this means wearing formal business dress, but this means different attires in different locations. We recommend doing some research to find out what consultants wear at your target firm and office.

To be at your best on the day of your interview, you must be well rested. Sadly, tiredness is one of the most common reasons for underperformance in consulting interviews. The day before is not the time to cram in further preparation. Instead, aim to have a quiet day and to get plenty of sleep at night.

Ultimately, consulting firms want to hire people who can represent the firm and interact with clients at every level, from the shop floor to the C-suite. Successful candidates treat the case interview as an opportunity to play the role of a management consultant advising a client (i.e. the interviewer). This means exhibiting a great deal of confidence and credibility, together with effective communication and an engaging attitude. It’s vital to stay focused on the overall problem and to drive the resolution of the case while being receptive to the interviewer’s input.

There are a lot of balls to juggle in a case interview, with the added pressure of a potentially life-changing outcome, but successful candidates don’t let their nerves get the better of them. We’ve provided some helpful hints and tips in our article on handling the stress of consulting interviews .

Being your best on the day of your interview requires extensive preparation. It means mastering each dimension of the case interview scorecard to the extent that the skills become second nature to you. It also means completing sufficient case practice to be able to focus on the big picture of the case you’re solving, rather than on simply demonstrating a set of skills.

How to prepare for case interview success

Delivering a standard of performance worthy of an offer from a top firm requires extensive case interview prep. In our experience, most successful candidates invest around 60 hours – or 10 hours each week over a six-week period – in their preparation. Failing to put this effort in is among the most common reasons why many candidates are unsuccessful.

Here’s what effective case interview preparation involves:

Learning the skills

In a case interview, your performance is assessed against a set of common problem-solving dimensions. To recap, these are structuring, math, judgment and insights, creativity, synthesis, and case leadership. It’s important to:

• gain a precise understanding of the expectations on each of these skills
• learn the techniques that will allow you to meet these expectations
• practice until your performance meets the required standard

We teach all these skills in our Interview Prep Course . In our bite-sized video lectures, we map out each of the key skills assessed in a case, and explain what you need to know to demonstrate each skill. We also share our tips on how to improve in each dimension, going above and beyond the advice we’ve included in this article.

In addition, our Interview Prep Course includes many more sample interviews that show real candidates – who went on to join top consulting firms – solving cases. Former consulting interviewers explain what the candidates did well on each dimension and where they could have improved.

Math is a critical prerequisite to handling cases and is something you should be comfortable with before you begin practicing. Our Case Math Course – provided as part of the Interview Prep Course – will help you brush up your skills. It contains 21 video lectures that cover everything you need to know, including the four operations, key math concepts, our pro tips, and business math.

After watching all our Interview Prep and Case Math video lectures, we recommend heading to the ‘Drills’ area of CaseCoach, where you can start practicing specific skills. Drills are interactive exercises that pose rapid-fire questions and provide instant feedback. They help you build your skills and confidence in specific case dimensions quickly, allowing you to make the most of your live case practice with partners. Our Interview Prep Course includes a comprehensive set of drills in four key areas: structuring, calculation, case math and chart interpretation.

When it comes to succeeding in a case interview, nothing beats live practice with a partner. Most candidates who go on to receive an offer from a top consulting firm like McKinsey, BCG or Bain complete at least 25 live practice sessions before their interview.

To practice live cases with a partner, you’ll need access to both case material and practice partners. In our Case Library , you’ll find over 100 cases – complete with solutions – developed by former management consultants. You can download eight of these cases right away by creating a free CaseCoach account. You’ll find a diverse community of fellow candidates who are all available for case interview practice in our Practice Room , where we facilitate over 3,000 practice sessions a week.

You can learn more in our article on how to practice case interviews .

Working with a coach

Some candidates choose to supplement their preparations by working with a consulting interview coach who has been an interviewer at a top firm.

These coaches have the skills and experience to gauge your level of performance and help you identify your areas of strength and weakness. They can also provide you with accurate and helpful feedback on your case-solving skills. This insight can help you accelerate your preparation and improve your performance. Getting used to interviewing with a professional should also help to reduce the stress of the consulting interview experience.

Here at CaseCoach, our coaches are all former consultants and interviewers who have been handpicked from the alumni of top firms such as McKinsey, BCG and Bain.

Do your research

Although employers who use case interviews all test candidates using similar methods, none of them approach the interview process in exactly the same way.

For instance, if you expect to interview with McKinsey, Bain or BCG, it’s helpful to know that these firms all give cases of similar complexity. However, there are some key differences. For example:

• Bain has been known to use estimation questions, such as market sizing, in interviews for its most junior (i.e. Associate Consultant level) roles.
• BCG and Bain occasionally use written cases.
• When it comes to the ‘fit’ interview, McKinsey uses its Personal Experience Interview format, while most Bain offices now use a ‘behavioral interview’ . Only BCG consistently uses the classic fit interview format .

Other differences include the number of rounds of interviews each firm conducts, and their preference for using interviewer-led or candidate-led cases. Wherever you interview, it’s vital to do your research and find out what you might be able to expect.

When it comes to getting ready for the case interview, knowing what you will be assessed on, learning how to succeed, and having access to the best practice resources can all go a long way. Now, you need to put in the hard work and prepare! Good luck.

Continue to learn

Explore other resources

Search resources, we value your privacy.

We are using cookies to give you the best experience on our website. By clicking "Accept all", you consent to our use of cookies. You can read our Privacy Information to learn more about how we use cookies.

Case Interview Preparation

Perform at your best during your case interview., bcgers share their case study interview tips., follow these dos and don ’ ts to ace your case prep:, test your case interview skills with these interactive quizzes., set out a climate strategy for a client., restore client satisfaction at a digital bank..

Think like a consultant. Get into consulting

Asking yourself how to prepare for case interviews?

Pre-packaged frameworks everyone learns them but only 2% of applicants are successful., our approach is different: our coaching programs teach you how to think like a consultant. find out how we can help you land an offer..

Find Out More About Coaching

Solve cases like a consultant

Join the MCC Academy to learn the business skills interviewers are looking for. Our comprehensive course features lectures and exercises that show how to solve case studies MBB style.

Trusted by world leading institutions

What our customers say

You backed me up in securing two job offers from McKinsey and BCG. You made sure I overcame all my weaknesses and successfully passed both the McKinsey PST and the BCG test. You definitely challenged me more than any other programme or website I had previously come across, but in the end, it was all worth it. Thanks My Consulting Coach!

I thought that being able to come up with a good framework is the most important factor to succeed in a case interview. But now I realize that it's the ability to structure your thought when you communicate, brainstorm, do market sizing, or calculations. Instead of glossing over my weaknesses, my coaches constantly push me to fix what I'm still weak at. I definitely reccommend the programme.

I practiced a lot of business cases with my friends and I thought getting coaching would be too expensive. I got rejected by one of the top consultancy firms and decided to try MyConsultingCoach. I learnt more in an hour of coaching than in 20 hours of self study. I then upgraded to a more comprehensive package. Probably the best investment of my life so far.

The mentoring program allowed me to achieve my potential and deliver a solid performance. Not only I passed at all firms, but I got offered a position which was one level higher than the one I applied for at one firm and two levels at another! Many thanks to all my friends from MCC! Without your help, I could have not achieved this.

Find case interview partners for free

Practice is the number one interview performance predictor. Find your ideal case partner from thousands of candidates around the world on our free meeting board . Schedule mock interviews on easy to practice, easy to deliver interactive cases. Get meaningful feedback thanks to our scorecard-based assessment which replicates the process of a real interview. Access your dashboard to monitor your progress and identify your improvement areas.


Get your AI mentor

Account not confirmed.

Secure your dream job in consulting!

Learn about the industry.

Check out all our resources to succeed in consulting

Industry insights, cv excellence, interactive case simulation, personal fit, perform as a consultant, make your case preparation as realistic as it gets, sign up now and try one case for free, check out our case library and start preparing, more content on youtube.

• A sample case interview including a detailed solution & interviewer feedback
• An 8 video series on how to best prepare for your case interview
• Many more insights on the consulting industry

Sign up now and try a case for free!

Check out our case library and start preparing, frequently asked questions, how is case interview hub different, what do i have to pay for, who are you and what qualifies you to talk about consulting, who is case interview hub for, why have you started the case interview hub, start your journey now and solve your first case for free, quick links, do you have any questions get in touch with us.

Sign in/up with Google

Sign in/up with Facebook

Sign in/up with Linkedin

Sign in/up with Apple

Sign in/up with Twitter

This field, is required.

You have not accepted the "Terms & Conditions".

Career in Consulting

Case interview prep: The definitive guide

This is the complete guide to boosting your case interview prep in 2023.

In this in-depth guide, you’ll learn:

• How to effectively prepare for case interviews
• How to turn your case interviews into job offers
• How to avoid the mistakes that lead to rejection
• And lots more

So, if you want to secure offers at McKinsey, BCG, or Bain & Company, this guide is for you.

Let’s dive right in.

Table of Contents

Case interview fundamentals.

In this section, you’ll get a handle on the fundamentals.

Whether you are new to case interviews or want to ensure you are on the right track, you’ll love this section.

Then, in later sections, we’ll cover advanced tips, techniques, and strategies to ace your management consulting interviews.

But first, let’s cover the basics of case interview prep.

What is a case interview?

A case interview is a job interview technique.

A case interview – or case study – is a job interview technique to assess a candidate’s potential to become a successful consultant.

To do so, management consulting firms ask candidates to solve real-life problems their clients face .

Hence, this perfectly simulates the job you must do as a Consultant.

For instance, here are two sample case questions from Bain & Company’s website .

And here are more examples from the McKinsey & Company website .

A case interview is a problem-solving test

To solve these real-life problems, you must go through a certain number of steps, such as identifying the key drivers of the problem, asking the right questions to walk your way through the case, analyzing data, and presenting a solution to the problem.

But don’t worry: I’ll detail these steps later in this guide.

The problems you have to solve in a case interview are diverse both in terms of industry (Hospitality, Transportation, Chemical, Banking, Oil & Gas, Private Equity, etc.) and business situation (improving sales or profits, decreasing costs, rethinking an organization, acquiring a company, etc.)

And they are usually taken from real-life projects done by the interviewers .

Another important rule in a case interview:

There is no right answer (but plenty of wrong answers).

Hence, what’s important for your interviews is your reasoning.

And this means they are more interested in your thinking process than a solution for the problem.

Here is an example from Bain’s website:

What is NOT a case interview?

I’ve been coaching candidates for over a decade.

And I’ve seen this misunderstanding too many times:

A case interview is NOT an exam .

Case interviewers are NOT testing your KNOWLEDGE or your memory.

They are testing your COGNITIVE SKILLS .

Which means:

Your ability to effectively use and adapt your knowledge to solve complex problems.

That’s why memorizing frameworks or formulas is useless… and often counterproductive.

There is no shortcut to ace a case interview.

Instead, you must develop your problem-solving and communication skills.

Remember this:

A case interview should be a conversation between 2 consultants solving a business problem.

This is far from being a student answering exam questions on a piece of paper alone.

Who uses case interviews and why?

All top management consulting firms use case interviews to assess a candidate’s problem-solving skills.

So, why do consulting firms use case interviews in their interview process?

You must understand this:

Management Consultants consider themselves professional problem solvers.

And during the case interview process, they want to see if you are one of them .

They want to see if you think and speak like them.

Here is a non-exhaustive list of consulting firms using case interviews in their interview process:

McKinsey & Company

Boston Consulting Group

Bain & Company

Oliver Wyman

Roland Berger

Strategy&

Monitor Deloitte

Note: This list is by no means exhaustive. Lots – if not all – boutique consulting firms use case interviews as well as part of their interview process.

The formats of case interviews differ from one firm to another.

And that’s what we are going to discuss in the next paragraph.

What are the different types of case interview formats?

Now, it’s time to discuss the two formats of case interviews:

Candidate-led case interviews

Interviewer-led case interviews

More specifically, you’ll learn what are the differences between a candidate-led and an interviewer-led case interview.

Also, you’ll learn what are the implications of these formats for your case interview preparation.

The first case interview format: Candidate-led case interviews

Most firms use a candidate-led format.

What does candidate-led mean?

In candidate-led interviews, the candidate is expected to drive the case from start to finish.

This means they are responsible for structuring the problem, asking the right questions, and leading the discussion towards a solution.

In other words, the candidate is in the driver’s seat.

They must proactively identify issues, prioritize them, and decide on the next steps.

Therefore, there’s often more room for creativity and exploration.

If the candidate decides to explore a particular area of the case in-depth, they have the freedom to do so.

The second case interview format: Interviewer-led case interviews

McKinsey uses interviewer-led interviews (so do – sometimes – Oliver Wyman and Strategy&).

In interviewer-led cases, the interviewers are more active in guiding the discussion.

After the candidates present the key topics to be analyzed to solve the business problem, the interviewers lead the direction on where to start diving into the analysis. 

While the candidate must still showcase their problem-solving skills, the interviewer largely determines the case’s direction.

The interviewer might direct the candidate to specific areas they want to test, making the case feel more structured and segmented.

The implications of the case interview format for your case interview prep

For Candidate-led Interviews, you need to be comfortable with taking the lead.

This means you should practice deciding which areas to probe further and which to deprioritize.

And I’ve created a free consulting case interview preparation course to show you how to do it:

Get 4 Complete Case Interview Courses For Free

You need 4 skills to be successful in all case interviews: Case Structuring, Case Leadership, Case Analytics, and Communication. Join this free training and learn how to ace ANY case questions.

For Interviewer-led Interviews, you must be quick, adapt to new information, and change your approach as needed.

Therefore, active listening is crucial to ensure that you’re addressing the issues raised.

However, while there are distinct differences between candidate-led and interviewer-led case interviews, the core skills being tested are consistent across both formats .

What to expect in case interviews?

Most candidates hear “case interviews” for the first time when they decide to apply for consulting jobs.

And for most candidates, this is the biggest obstacle between them and their dream job.

So, in this section, we will go through the 5 steps of a case interview.

All interviewers from McKinsey, BCG, Bain, or other top consulting firms expect you to follow these 5 steps.

Note : The techniques and strategies to ace these steps will be discussed in the section “How to ace your case interviews.” later in this guide.

Open the case

A case interview starts with the interviewer sharing the case prompt with you.

In the case prompt?

The interviewer shares a client’s situation and the problem they are trying to solve.

While the interviewer speaks, you must take notes.

You must write down all the critical information and keywords of the case prompt on a piece of paper.

Don’t worry:

This guide will address how to recognize the “critical information and keywords” of a case prompt.

And after the interviewer finishes sharing the case question, it’s your turn to speak…

Clarify the problem

You can assume that all the case prompts will be ambiguous.

Some critical information will be missing.

Or some keywords will be ambiguous.

And it’s your first job to remove any ambiguity.

An example?

Imagine this case prompt:

Your client manufactures cars. They have been experiencing declining sales and are asking for your help .

In the above case prompt, you should clarify what types of cars they manufacture.

A mass-market model like a Toyota Corolla?

or a luxury model like a Ferrari Spider 488?

The case’s direction will be very different whether we discuss one model or another.

Consequently:

You must ask clarifying questions to understand precisely the situation and goal.

Also, if you don’t understand a word, ask your interviewer to define it.

Develop a tailored framework

For most candidates, this is the scariest part.

During this step?

You must develop a mutually exclusive and collectively exhaustive (known by its acronym: MECE ) issue tree.

An issue tree can also be called a case interview framework (or case interview structure ).

Now, let’s address the following questions:

What is a case interview framework?

Why is this important?

What are the characteristics of a good case interview framework?

First, let’s define what a case interview framework is.

A case interview framework is your plan to solve the problem.

In other words:

This is your roadmap to move from the problem to the solution.

And during the case, you’ll walk your interviewer through this roadmap.

This roadmap must include all the factors that influence the behavior of the problem.

For instance: volume and price influence the behavior of sales.

And these factors must be organized by following certain principles (the infamous MECE principle ).

All these factors must be organized in a mutually exclusive and collectively exhaustive way to ensure that there is no gap (no important factor is missing) and no overlap (no factor is counted twice).

Now, what makes a great case interview framework?

Watch this video detailing the three characteristics of a superior case interview framework:

MECE (mutually exclusive and collectively exhaustive)

Logic-driven

Solve the problem

After you’ve presented your roadmap, you must ask relevant and insightful questions to the interviewer.

Get data and information to solve the case.

Your interviewer can provide you with data in three forms:

Then your job is to interpret these data.

You must turn these data into business insights.

Note: an insight is the meaning of the data in the context of the problem (more detail on that later).

This is called the “so-what” in top consulting firms.

At this stage, your interviewers mainly test your analytical skills and business judgment.

For instance, they ask themselves:

Can you connect the dots between different sets of data?

And can you derive conclusions from these sets of data?

Besides, interviewers also test your quantitative skills.

They might ask you to perform quick mental calculations (also known as case interview math).

And when you have formed many conclusions from the data analysis, you can derive a recommendation.

Now, it’s time to move to the next step.

Close the case with a solid recommendation

The final step consists of delivering your recommendation to your client.

This is when you tell your client what to do, why they should do it, and why it’s important.

This is when you shift from an “analysis mode” to a “presentation mode.”

You are now talking to your client’s CEO.

To deliver your recommendation, you must follow the top-down communication principles popularized by Barbara Minto in her book “ The Pyramid Principle ” (a must-read if you want to have a successful business career).

Hence, you must:

Start with your recommendation (or your answer to the client’s question).

Provide supporting arguments, usually taken from the analyses you performed during the case.

Discuss the next steps your client must take.

At this stage, your interviewers mainly test your communication skills.

But they also test your business judgment.

For instance, by asking themselves if your recommendation is actionable or not.

And… that’s it!

You are now done with your case interview.

Or at least you have an overview of the different steps of a case interview.

Now, you can watch this video where I present the 5 steps in detail:

What do case interviewers look for?

In this section, you will understand how you’ll be evaluated .

There is no secret: You must understand the rules of the game to have a chance to win.

And most consultancies – if not all – use the same criteria to assess a candidate’s case interview performance.

But let’s be clear:

In a competitive sector like Consulting, you must be in the top 1% of candidates across all these criteria to land an offer .

So, if you’ve ever wondered what it takes to be in the top 1%, you’ll learn a lot from this section.

Hard skills: the 4Cs and business acumen

During the screening phase, HR professionals check your resume and cover letter to establish if you have the potential to be a good candidate.

And during the case interview process, Consultants test this potential to establish if you’ll become a best-in-class consultant.

Consultants want to see if you have the skill set to become this best-in-class consultant.

Case structuring

Interviewers assess your ability to identify all the relevant components of a problem, to organize these components in a MECE way , and to explain clearly how each of these components helps solve the overall problem.

Case leadership

Interviewers assess your ability to prioritize the issues to analyze. You must demonstrate your 80/20 thinking (your ability to identify the 20% of issues that will solve 80% of the problem).

Case analytics

Interviewers assess your ability to transform data into insights. If data is the “what,” then the insight should be the “so what.” In other words, your ability to say what the implications of data are.

Communication skills

Interviewers assess your ability to communicate your ideas clearly and keep the interviewer engaged and aligned with your thinking process during the entire case discussion.

Also, clear and concise communication shows your interviewers that you are client-ready.

Business acumen

Business acumen – or business sense skills- is the top 1% factor.

This is how:

An issue tree is more tailored to the problem to solve

Only the most impactful issues are addressed

The interpretations of data are more insightful

In short, this is your ability to understand what moves the needle in problem solving.

Soft skills: personal characteristics

Besides the above hard skills, consulting firms check if you have the personal characteristics demonstrated by the best-in-class consultants.

Coachability

Feedback is a significant part of the culture in consulting.

Consultants receive formal feedback every 3 months (after each project) and informal feedback throughout the project.

So, interviewers check how you react to feedback.

Do you listen well, understand, and implement feedback?

Or do you defend your opinion at all costs?

And be careful: lack of coachability is a red flag for many interviewers.

Are you excited about working on a new project (in a new industry) every 3 months?

If the answer is yes, consulting can be a good career option for you.

A curious mind (or “growth mindset”) is an important characteristic of being a successful consultant.

Therefore, your answers in fit interviews or your attitude during case interviews should showcase your burning desire to learn new things.

Comfort with ambiguity

In management consulting, you’ll have to solve tough business problems while having incomplete information.

So, your case interviewers test how you deal with ambiguity.

And a consulting case interview is full of ambiguities!

Check this article to learn how to clarify a case prompt .

Confidence & maturity

Consulting is a client-facing job.

And top consulting firm clients – corporations or public organizations – pay tons of money for their services.

So, interviewers ask themselves, “Do I feel comfortable putting this person in front of my client?”.

Important note : Since I sometimes get the question, you’ll have your chance regardless of your personality (introvert or extrovert).

Case interview examples from different consulting firms

I will share two in-depth case interview examples with you in this chapter.

That way, you can see the strategies and techniques from this guide in action.

Specifically, we will discuss the two types of case interviews used by top consulting firms:

Business cases

Market sizing questions

And for each type of case interview, I’ll share examples with you.

Note: per my experience, top consulting firms do not use brainteaser questions .

Therefore, this guide will not discuss this type of question.

However, I encourage you to check if your target company uses such questions (other consulting firms might still use brainteasers in their hiring process).

Business problem examples

Business cases are the most common questions you can have in a case interview.

You are asked to solve a business problem for a fictional client.

Similar to real consulting engagements, business cases are typically organized by industry and functional category.

The industries you might encounter in a case interview are:

Agriculture,

Automotive & Mobility,

Consumer Goods,

Electronics,

Energy (Oil, Gas, Power),

Financial Services,

Healthcare & Life Science,

Industrial,

Infrastructure,

Metals and Mining,

Paper and Packaging,

Pharmaceuticals,

Private Equity,

Public and Social Sector,

Real Estate,

Semiconductors,

Technology & Telecommunication,

Transportation,

Travel and Tourism

Utilities & renewables.

The functions you might encounter in a case interview are:

Corporate Finance,

Digital & Technology,

Manufacturing,

Mergers and Acquisitions,

Operations,

People and Organizational Performance,

Recovery and Transformation,

Risk and Resilience,

Sales & Marketing,

ESG & Sustainability.

The following topics, which are not MECE , could be covered in case interviews depending on the function and the industry:

Growth strategies

Market entry

Cost optimization

Organization optimization

Product launch

Profitability case interview

Here is a first McKinsey case interview example:

Source: https://www.mckinsey.com/careers/interviewing/diconsa

Another example?

Here is another McKinsey case interview example:

Source: https://www.mckinsey.com/careers/interviewing/talbot-trucks

And here is a BCG case interview example:

Source: https://careers.bcg.com/case-interview-preparation .

Finally, over 250 case interview examples (with answers) are found on this page .

Sample market sizing questions

A market sizing question is a case interview where you have to estimate the size of something with no (or little) data available .

Market sizing questions can be embedded in business cases or can be asked as standalone questions.

For instance, here are some sample market sizing questions:

How many coffee cups does Starbucks sell in a year?

What volumes of beer are sold during an LA Lakers basketball game?

How many iPhones are currently being used in China?

What is the monthly profit of an average hair salon in the UK?

Market sizing questions are a very popular type of case interview at top consulting firms.

So let me be clear:

You can NOT land an offer at McKinsey, BCG, or Bain if you don’t know how to solve market sizing questions.

That’s why I’ve written a comprehensive step-by-step guide on market sizing questions here .

In this guide, you’ll learn my best strategies to solve the 3 types of market sizing questions .

Also, you’ll find plenty of examples to see how these strategies work.

Old vs. New cases (2021 - present)

For the past few years, case interviews have changed.

Until a few years ago, case questions looked like this:

Declining sales

Declining profits

In short, the types of questions you can find in books like “ case in point” or “ case interview secrets.”

Less than 40% of case interviews are questions from the above list.

The other 60%?

Non-traditional case questions.

For instance, McKinsey recently asked this question:

Your client is a fictional country. They want to develop a plan to fight climate change. How would you help them with this question?

So, why have consulting firms decided to use this new type of question?

Because the goal of case interviews is to understand how you think.

And more precisely:

How you think outside your comfort zone.

Have you learned all the well-known business frameworks?

👉 They test your ability to solve business problems where these frameworks are irrelevant.

Do you have an Engineering degree?

👉 They will give you a case involving lots of business concepts.

Don’t have quantitative experience?

👉 They will give you a case with lots of math, charts, and numbers.

And it makes a lot of sense.

Because it mimics the day-to-day job of a consultant:

Consultants are constantly outside their comfort zone.

And they are constantly exposed to new topics.

Now, the implications for you are very important.

You can’t only rely on well-known frameworks.

Instead: you must learn how to build your own tailored frameworks.

You must learn how to think with First Principles and top-down logic.

You must learn how to organize your ideas in a MECE way .

Even for non-traditional case questions.

And I’ve created 4 free consulting case courses to learn just that:

How to ace your case interviews

In this section, I’ll show you how to turn your case interviews into offers.

In fact, the strategies in this section have helped over 350 candidates land job offers at McKinsey, BCG, Bain, or any boutique consulting firms.

And the strategies I share here can be used in all types of cases: market entry, profitability case interview, M&A, etc.

Let’s start with how to open a case like a pro!

Acing the opening: remove ambiguities

There is a lot of misleading information online about how to open a case:

Paraphrase the case prompt (aka repeat information your interviewers already know).

Ask a maximum of 3 clarifying questions.

End by asking if there is any other objective you should know.

But there is a better way to open a case:

Add business colors.

Take the lead.

Ask clarifying questions (as much as necessary).

Do a smart recap.

Here’s the truth:

How you open a case sets the tone for the entire case.

Start poorly, and your interviewer won’t guide you much during the case.

On the other hand:

Give a strong first impression, and your interviewer will see you as one of them from the first seconds of the case.

And that can be a game changer in your performance and chances to land an offer.

Therefore, this must-read guide will show you how to start your case interview correctly.

Acing the case structuring: create the perfect issue trees

We discussed this before:

An issue tree is the strategic framework that guides your analyses and helps you answer the client’s question effectively.

Before we dive into the nitty-gritty, let’s revisit the three essential characteristics of a robust case structure:

1. MECE (Mutually Exclusive, Collectively Exhaustive): Your structure should cover all possible areas without any overlaps.

2. Logic-Driven: The structure should follow a logical flow, making the logical connection between the different areas and the problem clear.

3. Tailored: Your framework should be customized to the specific problem at hand, not a one-size-fits-all template.

It shows that you can think strategically, organize your thoughts, and approach problems methodically—all essential skills in consulting.

Take Your Case Structuring Skills to the Next Level

Ready to master the art of case structuring?

Sign up for our free 4-hour video case interview training course .

This comprehensive course will walk you through the intricacies of developing a winning case structure, complete with real-world examples and actionable tips.

Acing quantitative questions: conquering numbers!

The mere mention of case interview math questions can send shivers down the spines of candidates with weaker quantitative backgrounds.

But hold on!

These questions aren’t just about doing quick mental calculations.

In fact, interviewers are looking for three crucial elements:

Structured Approach : Can you systematically break down the problem?

Numerical Comfort : Are you at ease with numbers and capable of swift mental calculations?

Business Sense : Can you interpret the results in a way that makes business sense for the client?

In the realm of case interviews, math questions often serve to calculate data that fills in the gaps in a given problem.

For example, you might be tasked with:

Market Sizing : For instance, estimating the potential size of a market.

Financial Metrics : For instance, calculating performance indicators like Payback Period or ROI.

Solution Impact : For instance, assessing the potential cost savings or productivity gains from a particular initiative.

The Truth About Mental Math

The world of mental calculations in case interviews is fraught with myths.

Let’s debunk some:

Reality : Calculators are a no-go. You’re on your own.

Reality : A significant math mistake is often a one-way ticket to rejection.

Reality : While some may tell you it’s okay to round numbers, most interviewers would disagree.

The rules can vary depending on who’s sitting across the table from you, so always be prepared for the strictest guidelines.

Follow This 4-Step Approach to Ace Quantitative Questions

Step 1: Define an Arithmetic Equation

The first step is to translate the business problem into an arithmetic equation.

This is where your structured approach comes into play.

Step 2: Do the Math

The data needed to solve the equation are usually provided by the interviewer.

If not, don’t hesitate to ask.

Occasionally, you’ll need to make educated estimates.

When calculating, remember: accuracy trumps speed.

Step 2bis: Do a Sanity Check

Before you share your answer, do a quick sanity check.

Does the result make sense in the context of the problem?

If something feels off, revisit your calculations.

Step 3: Share Your Insights

This is where your business sense shines.

Interpret the numbers and discuss their implications for the client’s situation.

Step 4: Lead the Case

Based on your calculations and insights, guide the conversation toward actionable recommendations.

Here is an example:

Interviewer : “How many units does a car manufacturer need to sell to break even?”

Candidate : “To find the breakeven volume, we can use the equation: Fixed Costs / (Selling Price – Variable Costs). Given that the fixed costs are $10 million, the selling price per unit is $20,000, and the variable costs are $15,000, the breakeven volume would be 1,000 units.”

How to Practice Math Questions

To sharpen Your Skills:

Mock GMAT Tests : These tests are excellent for practicing a wide range of quantitative problems.

Case Interviews : Simulate the real experience by going through case interviews that include math questions.

But don’t limit yourself to traditional methods.

Various online platforms and apps are designed to help you practice mental calculations and case-specific math problems.

By mastering case interview math, you’re not just showcasing your ability to crunch numbers.

You’re proving that you can think critically, make data-driven decisions, and lead a case to its logical conclusion.

Acing chart interpretation questions

Knowing how to interpret charts should be part of your consulting toolbox.

And to crack the case, you’ll have to analyze data presented in the form of charts or data tables.

While it looks straightforward, the challenges are numerous:

The quantity of data presented can be huge, and your time to analyze these data is limited. And some firms – like BCG – like to present charts with lots of irrelevant data…

Charts can come in many forms: bar charts, line charts, pie charts, scatter plots, etc. You must know how to decode each type of chart.

The game you’re playing here is not to read the data correctly but to turn these data into insights (the “so-what”). Your business judgment will make the difference here.

You sometimes need to use data presented 5 minutes ago in another chart to complete the actual analysis.

Understand the different types of charts

A chart is an immensely powerful way of presenting numerical data. All the information is summarised in one go in a way that the eye can readily absorb.

Trends, proportions, and other relationships are revealed at a glance.

If you are unfamiliar with the different types of charts, I recommend reading the book: “Say It with Charts” by Gene Zelazny.

This book is a masterpiece when it comes to explaining why a type of chart is used to convey a certain type of message.

But if you don’t have time to read these books, remember just this:

Each chart has one (and one only) objective.

The main objective a chart can have is:

Identifying a trend (line charts or column charts)

Showing the relative contribution of different categories to a whole (pie charts)

Comparing different items against a metric (bar charts)

Identifying the correlation between 2 data sets (scatter plots)

So, the next time you see a chart, ask yourself:

What’s the chart type (pie chart, line chart, etc.)

What’s the objective of this chart (showing a trend, comparing items, etc.)

What do data say?

Let’s discuss how to master the exhibit reading.

Follow this 5-step approach to ace chart interpretation questions

Here is a 5-step approach to ensure you’ll never miss any insightful information from a chart:

Step 1: Understand the data represented.

Take the time to read the information about the chart (titles, labels, X-axis, Y-axis, units, footnotes, etc.)

And clarify any word or information that is not clear. Asking questions is part of the consultant’s job!

Per my experience, 80% of the chart interpretation mistakes come from misunderstanding the data represented.

Step 2: Ask for time to structure your thoughts.

It’s okay to ask for 30 seconds to 1 minute to structure your thoughts.

Don’t be afraid of the silence… your interviewer prefers to have a structured and insightful conversation rather than rambling.

Step 3: Define your goal (top-down vs. bottom-up approach)

This is the biggest mistake I see:

Candidates use a bottom-up approach instead of a top-down approach.

The difference?

With a bottom-up approach, candidates jump into the data and hope to find something insightful.

In other words, they start their analysis without a plan.

Candidates with a top-down approach start with a plan before jumping into the data presented in the chart.

Their plan?

They start with the issue they were analyzing.

And list the data they need to solve this issue.

Finally, search for these data in the chart presented.

With this top-down approach, you will be able to sort the relevant data from the irrelevant information easily.

Step 4: Communicate your key insights and implications.

During this step, you tell your interviewer what the data means regarding the client’s problem.

Do NOT say obvious observations!

“This data is going down…”

“The value of <any metric> has been stable for the past 2 years…”

These are not insights… but obvious observations.

Your job is to interpret the data.

Here are some questions to ask yourself:

What do these data mean for the client? 👉 Insights

What does the client should do? 👉 Implications

  Step 5: Lead the case.

Regardless of the format of the case interview (interviewer-led or interviewee-led), I recommend proactively saying what the next steps are.

Discuss, based on your findings, what you want to discuss next.

How to practice chart interpretation questions?

First, you can practice with GMAT tests.

Here are some examples .

Besides, visit websites full of charts like The Economist, The Wall Street Journal, etc.

Find charts, draw conclusions from these charts, and read the article to check if your conclusions make sense.

Also, practice with the case examples you can find in these case books .

Acing market sizing questions

Do you struggle with market sizing questions?

This can include: How to start the case? Which clarifying questions to ask? How to organize my thoughts and build an issue tree? Which assumptions to make? Do I have to check if my estimate makes sense? If yes, how?

Answering a market sizing question can be very SIMPLE.

Actually, it is very simple: there is a PROVEN FORMULA for solving market sizing questions.

This PROVEN FORMULA is like a comprehensive guide: if you follow each step, you’ll QUICKLY answer ANY market sizing questions SUCCESSFULLY.

In this guide, I’ll reveal my PROVEN FORMULA to answer market sizing questions and show how to use it with two full examples (with answers).

You can find this comprehensive guide here .

Acing the closing: The Art of giving a Winning Recommendation to the CEO

You’ve analyzed the data, solved complex problems, and navigated through the case interview.

Now, it’s time to wrap it up with a compelling recommendation for the client’s CEO.

Your closing remarks can make or break your chances of landing that coveted consulting role.

Here’s how to avoid common mistakes and structure an impactful recommendation.

Mistake #1 When Closing the Case: Repeating the Analyses You've Done

You’re now speaking to the CEO, not a fellow analyst.

The CEO doesn’t care about the number of Excel models you’ve built or interviews you’ve conducted.

They want a clear, actionable solution to their problem.

So, skip the methodology and get straight to the point.

Mistake #2 When Closing the Case: Not Being Assertive

This is not the time for ambiguity or hedging.

CEOs seek decisive, confident recommendations.

If you’re not assertive in your closing, you risk losing the CEO’s trust and, consequently, the case.

Mistake #3 When Closing the Case: Not Having a Clear Recommendation

If the CEO is left wondering, “Okay, but what should I do?” after your presentation, that’s a red flag.

Your recommendation must be crystal clear, leaving no room for interpretation or doubt.

How to Close the Case: The Structure of an Amazing Recommendation

To craft a recommendation that hits the mark, follow this structure:

Step 1: Initial Question Asked

Begin with a one-sentence summary of the question you’re answering.

For example, “You asked us to determine whether you should launch this new shampoo?”

Step 2: Your Recommendation

Provide a straightforward answer to the initial question.

For instance, “You should launch this new shampoo.”

Step 3: The Supporting Arguments

List all the logical reasons that back your recommendation.

For example, “This new shampoo will add $10 million in profits and doesn’t require significant investment in R&D or new production equipment.”

Step 4 (Optional): The Next Steps

If applicable, outline the immediate actions the CEO should take to implement your recommendation.

The Role of Risk in Your Recommendation

While some coaches advise discussing risks separately, I believe risks should be integrated into your supporting arguments.

If you can’t mitigate the risks, your recommendation loses its value.

The Timeframe for Impact

Lastly, ensure your recommendation can deliver impact within the CEO’s tenure—typically less than five years.

A great recommendation is not just insightful but also timely.

Where to start: A comprehensive case interview preparation plan

Are you feeling overwhelmed by the thought of case interviews?

You’re not alone.

With all the resources available online, knowing what’s relevant and how to separate the wheat from the chaff is difficult.

But with the right preparation plan, you can make it!

This 3-step plan takes you from discovery to mastery, ensuring you’re well-prepared for your case interviews:

Step #1: Discovery

Step #2: Practice

Step #3: Mastery

Bonus step: Mastery+

Step 1: Discovery

The first step is all about understanding the landscape. You need to know what you’re up against before conquering it.

Key Activities

Research different types of case interviews and consulting firms.

Identify the skills commonly tested.

Conduct informational interviews with current consultants (this can also be an opportunity to validate whether consulting is a good fit for you).

Major Pitfalls to Avoid

Don’t assume all case interviews are the same.

Avoid neglecting the importance of networking early on.

Don’t underestimate the emotional job; build your confidence from the start.

Step 2: Practice

You’ve done your homework; now it’s time to get your hands dirty. Practicing case interviews is where you turn knowledge into skill.

Work on mock case interviews with peers or mentors.

Use case interview prep books and online resources to practice cases.

Track your performance to identify areas for improvement.

Don’t practice going through the motions; make each session count.

Avoid practicing only with friends who might not give honest feedback.

Don’t ignore your weaknesses; confront them head-on.

Step 3: Mastery

This is the final stretch. Mastery is where you develop and fine-tune your skills to become a top 1% candidate.

Think using first principles .

Seek feedback from industry professionals.

Develop your business acumen:: while you are not expected to have an in-depth knowledge of an industry, a high-level understanding will help to generate better ideas and insights.

Practice with a diverse set of cases (different situations and industries).

Practice with recent cases (read the section Old vs. New cases).

Conduct mock interviews under timed conditions.

Do you know the Dunning-Kruger effect?

If not, read this article because it can be what you need to land offers in consulting.- Don’t get complacent; always look for ways to improve.

Therefore, avoid the trap of overconfidence; humility can be your greatest asset.

Step 3bis: Mastery+

Think you’re ready?

Mastery+ is your chance to test your skills in a lower-stakes environment by practicing with Plan-B firms.

Yes, you read me well: practice case interviews with Plan-B firms.

Apply to consulting firms that are not your first choice.

Go through their interview process as if they were your top choice.

Use the experience to identify any remaining gaps in your preparation.

Don’t treat these interviews as mere practice; give them your all.

Avoid burning bridges; you never know when a Plan B could become a Plan A.

Don’t ignore feedback; even a rejection can be a valuable learning experience.

From Discovery to Mastery+, each step is a building block towards your ultimate goal: acing that case interview and landing your dream consulting job.

Many candidates without business or consulting experience did it, and so can you.

So, are you ready to embark on this transformative journey?

Start by learning how to solve case interviews and get tips to help you navigate this exciting path.

Finally, watch this video about how to prepare for case study interviews on the BCG website :

Frequently Asked Questions

How much time is needed to prepare for case interviews.

This is a tricky question.

Because it depends on factors such as:

Your strengths and weaknesses

The time you can dedicate to your preparation

Your learning pace

However, there is an important rule:

Start as soon as you can.

It takes time to be ready.

A case interview is NOT an exam: you can’t cram your consulting interview preparation in a week or two.

What are the most common case interview mistakes?

Check this article to find out what are the 16 case interview mistakes to avoid at all costs.

What are the differences between Round 1 (R1) and Round 2 (R2) cases?

Here are the main differences between first round interview and second round interview:

The seniority of your interviewers : R2 case interviewers are often Directors or Partners, while R1 case interviewers are Senior Consultants or Managers

Stress : Second-round interviews are usually more stressful. The reasons are numerous: the offer is getting closer and closer, interviewing with a Partner from a prestigious firm, etc.

Competitiveness : R2 candidates are competing with other R2 candidates. This tautology means that all the candidates who have made it so far are good, and the selection will be made on details.

The weight on assessment criteria : R2 assessment criteria are the same as R1 criteria (see the section “What do case interviewers look for?”). However, the importance of these criteria differs. Partners tend to value more criteria such as communication, confidence, leadership, and maturity.

Focus on your weaknesses : after an R1 case interview, the consulting firm lists your strengths and weaknesses. Therefore, an R2 case interview includes questions to validate (or invalidate) any doubt about your capacity to be a world-class consultant. For instance, if your quantitative performance was not positive, you can expect an R2 case interview with many quantitative questions.

However, I believe these differences should NOT influence your interview prep.

And, as discussed in this article, your goal is to be in the top 1% across the 4 main performance assessment criteria.

Finally, since we are talking about R2 interviews:

I can not stress enough the importance of fit interviews.

Your answers to questions such as “ Why consulting? ” or “ Why McKinsey? ” greatly influence the final decision.

Will my case interview be in person or via Zoom?

Check with your HR contact to validate this point.

Besides, you can read this McKinsey guide about virtual interviews.

Do you recommend practicing with a coach?

Being a coach myself, I’m obviously biased.

But I tried to give you a fair answer to help you decide what’s best for you.

First, let’s define what a good coach is.

A coach is someone with an extensive experience in consulting and in helping others land offers.

For instance, your friend who just got an offer at McKinsey is NOT a coach.

Receiving an offer and explaining to others how to receive offers are two different things.

Therefore, the first criterion to decide if a coach can help you is to look at how much time they spend in:

Consulting,

Supporting candidates.

That being said, I recommend using coaching services if you can afford it.

Because this is the best way to get qualitative feedback.

You’ll know PRECISELY:

What is the distance between your performance and the performance of the top 1% of candidates.

How to quickly reduce this distance and become a top 1% candidate yourself.

At careerinconsulting.com, we have a unique coaching model:

We coach and support our clients until they receive an offer.

Interested?

If yes, check this page .

What are the basic business concepts to know?

I’ve written an article discussing some basic business concepts that might be helpful in acing your case interviews.

Any final tips?

Check these 16 case interview tips to move your skills to the next level.

For instance, you’ll learn the mistakes to avoid when developing an issue tree.

Also, check these case interview examples by clicking here .

How to get a case interview?

You get it:

Acing case interviews require a ton of hard work.

And you don’t want to put all this hard work into the trash by not being invited for interviews .

Unfortunately, the odds are against you: less than 30% of applicants are invited for interviews.

And don’t fool yourself:

Your prestigious college name and high GPA are insufficient.

Consulting firms look at a combination of factors to select the applicants invited for interviews.

So, how to pass the screening phase and be invited for interviews ?

But don’t worry, I’ve written comprehensive guides that tell you how to do it.

Write a consulting resume

How to make your resume stand out?

By writing EPIC bullet points!

So, check this step-by-step guide to turn your resume into an outstanding resume.

In this comprehensive guide, you’ll learn:

What matters the most to recruiters in consulting

How to stand out from the hordes of other applicants

What are the most common mistakes that lead to rejection (and how to avoid them)

Also, you can download templates for McKinsey, BCG, and Bain & Company.

And here is the best part:

You’ll get an exhaustive checklist to assess the readiness of your CV.

Write a consulting cover letter

At the beginning of the interview process, recruiters from top consulting firms want to know you better.

They want to know who the person is beyond the amazing achievements on your CV.

So, if you wonder how to express your motivation to join a firm, this step-by-step guide is for you.

Also, you can download winning cover letter examples that passed the screening phase at top consulting firms.

See you there !

Beyond case interview prep: Fit interview questions

Your case interview performance counts for 50% of the interviewer’s decision.

The other 50%?

Your fit interview (aka personal experience interview) performance.

So, you can’t overlook your personal experience interview preparation.

Are you in one of the following situations?

I’ve just been accepted at [fancy MBA program]. So, I know how to present myself.

I’ve just been accepted at [fancy non-consulting company]. So, I know how to present myself.

I’ve had lots of job interviews in the past. This is not new to me. Instead, I prefer to spend my time on case interview preparation because case interview is new to me.

Your preparation must be aligned with the specific requirements of consulting firms.

In other words, even if some questions are typical job interview questions (e.g., “Tell me about yourself”), their expectations are different.

For instance, consulting firms assess your strategic thinking skills even in fit interviews.

Besides, they want to understand why you are genuinely interested in pursuing a career in consulting.

Thus, here is a series of articles to help stand out during your fit interviews:

How to answer the “ Tell me about yourself ” question

How to answer the “ Why consulting ” question

How to answer the “ Why Mckinsey or BCG or Bain ” question

How to answer behavioral interview questions using the STAR framework

Read these articles, and you’ll be covered for the main personal experience interview questions.

Case interviews mimic what consultants do: solving business problems.

And often, there is no right answer.

What’s important is to show how you think.

So, I hope this guide will help ace your consulting interviews and start your career in management consulting at Boston Consulting Group or any top consulting firm.

I’d love to hear from you: What’s your biggest challenge in case interview prep?

Let me know by leaving a quick comment below right now.

-Want to know all the secrets of the consulting interview process?

👉 Check this article about the McKinsey recruitment process .

👉 Also, check this article about the Boston Consulting Group recruitment process .

Want more case interview examples? Or start to practice cases?

👉 Check this page: https://careerinconsulting.com/case-interview-examples/

You’ll find plenty of Bain case interview examples, for instance.

Finally, want to ace personal experience interview questions?

👉 Check this page: https://careerinconsulting.com/mckinsey-pei/

SHARE THIS POST

4 thoughts on “Case interview prep: The definitive guide”

Pingback: Tell me about yourself: how to answer this question (with examples) - Career in Consulting

Pingback: 280 Free Case Interview Examples - Career in Consulting

Hi Sebastien, thank you for your informative article. I do struggle to assign 7 McKinsey cases into the above-provided groups, they seem to get a bit more creative every year! Do you mind commenting or advising on those?

Case/Type: 1) Case: Beautify, Potential Type: Take a strategic decision 2) Case: Diconsa, Potential Type: Take a strategic decision 3) Case: Eletro-Light, Potential Type: Take a strategic decision) 4) Case: National Education System, Potential Type: ? 5) Case: Talbot Trucks, Potential Type: Take a strategic decision 6) Case: Shops Corporation, Potential Type: ? 7) Case: Conservation Forever, Potential Type: ?

Hi. thank you for your message. Where can I find the above cases?

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

You need 4 skills to be successful in all case interviews: Case Structuring, Case Leadership, Case Analytics, and Communication. Enroll in our 4 free courses and discover the proven systems +300 candidates used to learn these 4 skills and land offers in consulting.

28 Case Interview Examples for Consulting Interview Prep (2024)

• Last Updated January, 2024

Rebecca Smith-Allen

Former McKinsey Engagement Manager

How to Use Case Interview Examples

Video Case Interview Example: Questions & Answers

Tips for Acing Your Case

Free Case Interview Examples (Consulting Firms)

Free Case Interview Examples (Consulting Clubs)

Practice is the key to passing your consulting interviews. To practice, you’ll need some examples of case interview questions and answers to work with.

We’ve got links to loads of them below.

In addition, we have:

• Tips on how to use case interview examples to prepare for your consulting interviews,
• A video case interview example with My Consulting Offer founder Davis Nguyen, and
• Insight into the difference between average and exceptional answers to case interview questions.

Get ready to dive deep into structuring your analysis of business problems, identifying the key issues, and recommending solutions!

Keep reading to find out how to use case interview examples to ace your case.

How to Use Case Interview Examples to Ace Your Case

1. start your case interview preparation early..

You’ll need to practice dozens of case interview examples to get good enough to receive an offer from one of the top consulting firms. This is not something you can cram the night before an interview.

Start as soon as possible.

2. Don’t Read Straight through Sample Case Interview Examples or Passively Watch Videos.

Some people think that the best way to improve their chances of passing a case interview is by reading as many cases interview examples as they can.

This is like reading about how to play tennis but never picking up a racket. To get better at tennis, for example, you need to actually pick up a ball and be active. The same applies to your interview preparation.

Stop and think at each step in the case interview question. Come up with your own answer and say it out loud. Practice driving each part of the case interview example yourself.

• How would you structure your analysis of the problem?
• What questions would you ask the interviewer?
• How would you set up the case math problem?
• What recommendation would you make to the client?

After you’ve developed your answer, compare it to the suggested answer for the case.

What did you get right?

How did your answer and the case interview example answer differ?

Are there things you miss consistently across multiple case interview examples?

The answers to these  case interview examples can look simple when you just read through them, but it’s not easy to come up with all the key aspects of the solution on your own.

Nail the case & fit interview with strategies from former MBB Interviewers that have helped 89.6% of our clients pass the case interview.

3. Find Partners to Practice Case Interviews with.

Teamwork is an important part of consulting work, so get ready for it now. Find a case interview practice partner, preferably someone else who’s applying to jobs in the management consulting industry because they’ll know more about what recruiters are looking for.

Practicing cases with a partner provides the opportunity to get feedback from someone else on what you’re doing well and what you need to improve. Additionally, you’ll learn a lot by watching how your partner solves sample case studies.

Look for aspects of their approach that are effective as well as what they could do better. Working with a partner will make your consulting interview practice feel more real.

Similar to how you need a tennis partner to feel what is like to play tennis, you need a case partner to experience what a case interview is like.

4. Master the 4 Parts of the Case Interview.

In our article on Case Interview Prep , we discussed the 4 parts of the case interview: the opening, structure, analysis, and conclusion. As you practice with consulting case interview examples, practice each of these 4 parts to ensure you’re strong at them all.

5. Avoid Case Burnout.

A case zombie is someone who’s grown tired of casing from doing too much of it. Their answers feel rehearsed, not conversational. 

They may seem bored, not engaged in solving the problem. They’ll be less creative in their solutions. They certainly won’t pass the airport test!

Avoid becoming a case zombie by practicing smarter, not harder.

Video: Case Interview Examples – Questions & Answers

In the following case interview example, Davis Nguyen, founder of My Consulting Offer solves McKinsey’s SuperSoda case.  The video is broken into 4 parts of the case interview.

Remember, don’t just watch the video. Stop the video and provide your own answer before listening to Davis’s  answer to the case question.

Step 1: Case Interview Example Opening – Ensure you understand the client and the problem you’ll be solving in the case.

Step 2: case interview example structure – break the problem down into smaller parts. make sure you cover all key case issues., step 3: case interview example analysis – ask questions, gathering information from graphs and charts provided by the interviewer, do case math, and provide insight into the client’s business problem based on what you learn., step 4: case interview example recommendation – develop a rational recommendation for the client based on all you’ve learned throughout the case interview., tips for acing your consulting case interviews – the difference between average & exceptional, case interview opening.

The opening is a great point to ask “dumb” questions because, at this point, you’re not expected to know much about the client and their business. 

Here your goal is to understand the client, their business, and what a successful project will look like.

Don’t shy away from asking for clarification on things that will help you better understand the business problem and solve it. For example, if you don’t know how life insurance works and the case is about life insurance, then ask.

After ensuring you understand the client and their problem, the next thing to ask about is key metrics of success. 

For example, the client may want to find new avenues for growth. Are they looking for a 5% increase in revenue or to double their business?

Finding out what success looks like in the client’s eyes will ensure you work to deliver a solution that meets their expectations, not one that’s underwhelming.

After you find out what success looks like, ask further probing questions to better understand the client, their business, and any constraints on solving the case.

Examples of Relevant Questions to ask Your Interviewer 

Examples of relevant questions about the client might include the geography they operate in or the sector of their industry they are strongest in. 

Examples of relevant questions about their business might include what products or services are most profitable or most important to their customers. 

Examples of relevant questions about the problem might include whether there are any costs that can’t be cut or what the maximum amount the client is able to invest in developing a new product. 

Asking these types of questions up front will give you a better context for solving the client’s problem and make it more likely that you will solve the case interview.

Case Interview Structure

You’ll need a framework to make sure your analysis covers all key aspects of the consulting case. 

You can use one of the many standard Case Interview Frameworks we’ve outlined , but top interviewees develop their own framework for analyzing the case interview question. 

Their frameworks may include pieces of one or more of the standard frameworks but are tailored to the particular business problem they’re discussing. 

Good frameworks are hypothesis-driven, that is to say they can be tested similar to the science experiment, so that the answer is either a “yes” or “no.” For example, examining your bank account to see, “if I have $400 for a ticket” is an example.

Second, good frameworks cover all topics relevant to the answer. For example, if the client is opening up a new hotel in a foreign country, checking out the existing competition should be part of the framework.

As you study more about interactive case interviews and practice them you’ll develop a sense for what factors are relevant or not relevant to the case at hand.

Finally, a good structure will be  MECE  or mutually exclusive and collectively exhaustive.

This means the framework will break down the market or population being analyzed into segments that include every part of the whole (collectively exhaustive), and each segment of the market or member of the population will show up in one and only one category without overlap (mutually exclusive). 

For example, if you divide the target market for a retail product into segments by age, these segments would be MECE:

•  10-19,
• 40-49, etc.

The categories 15-25, 20-30, 27-35 would not be MECE because people could be counted twice. 

Case Interview Analysis

In the analysis phase of your case interview example, you’ll ask questions to get the information you need to solve the client’s business problem. Your questions will likely lead you to one of the 4 types of analysis that are common in consulting interviews: market sizing, brainstorming, quantitative reasoning (case math), or reading exhibits. 

No matter which of these types of analysis comes up, there’s a 4-step method that ensures you can crack the case. 

This 4-step method is:

• Ask for data,
•  Interpret the data,
•  Provide insight, and 
• Outline next steps. 

The data you ask for will depend on the case interview question you’re solving. For example, if the question is about profitability, you’ll need to know about the client’s finances: dig into revenues and costs. 

For example, if you find that the client’s revenues are flat while their costs have been rising, you’ll know that the problem is in the cost structure and that you’ll need to examine costs more closely.

Next, provide insight. As you examine costs further, you’ll find out why they’ve grown faster than revenues. 

This insight will naturally lead to the next steps. What does the client need to do to get costs under control and fix their profitability problem? 

You may need to go through this 4-step method a couple of times, focusing on different aspects of the client’s business problem. 

Once you’ve examined and developed insight into all key aspects of the problem, your next step will be to conclude the interview with a recommendation for the client.

Case Interview Conclusion

At this point, you’ve hopefully cracked the case and are ready to present your recommendations to the client (your interviewer). 

The best way to do this is to use the 5R approach:

• Recap – restate the business problem you’ve analyzed. In consulting this is done because a CEO might have hired 5 McKinsey teams and can’t remember which one you are on. 
• Recommendations – Provide the solution your analysis led to. We lead with the recommendation because it is the most important piece of information. Stating it first and clearly puts everyone on the same page.
• Reasons – Summarize the key facts and insights that lead you to your recommendations. 
• Risks – Outline any risks the client should be aware of as they implement your recommendations. No recommendation has a 100% probability of success. Clients need to be aware of business risks in the same way patients need to understand the side effects of drugs.
• Retaining the client – Provide next steps for how you can help the client ensure success. As consultants, we are paid for helping our clients. If there is a natural extension of the work as the client implements the team’s recommendations, we should tell them how we can provide further assistance (and ultimately make money for your firm). 

While most candidates will address their recommendations and possibly the reasons for their recommendations, few will hit all these points. 

In particular, outlining risks and further ways you can help the client will differentiate you from other candidates and help you to advance  to the second round of interviews or get the offer.

Free Online Case Interview Examples from 7 Top Consulting Firms

Now that you’re familiar with how you should use case interview examples and what differentiates an average answer from an exceptional one, you need sample questions to practice with.

Below, we provide links to dozens to help you hone your business problem-solving skills.

1. McKinsey Case Interview Examples

Disconsa – Help a not-for-profit develop better financial-service offerings for remote Mexican communities.

Electro-Light – Help a beverage manufacturer prepare for a new product launch.

GlobalPharm – Help a pharmaceutical industry client manage with its merger and acquisitions strategy.

Transforming a National Education System – Help a country’s education ministry develop a new strategy for educating the country’s children. 

2. BCG Case Interview Examples

Climate Challenge – Help a global consumer goods company reduce its environmental impact.

Driving Revenue Growth at a Healthcare Company – Help a medical devices and services company to increase revenues following an acquisition. (The same one that is highlighted above in our example)

3. Bain Case Interview Examples

Coffee Shop Co. – Help a friend decide whether they should open a coffee shop.

F ashionCo. – Help a fashion company understand why its revenues have been going down.

Private Equitas – Help a private equity company maximize its investment in a portfolio company.

4. Deloitte Case Interview Examples

Footloose  – Help a footwear company improve their market share in the boots category.

Recreation Unlimited – Help a global apparel and sportswear company improve its digital customer experience and its revenue.

Agency V – Help a large federal agency recover from a front-page scandal that sparked investigations and congressional hearings.

Federal Benefits Provider – Help a federal agency that provides benefits to millions of U.S. citizens prepare for a major expansion of its mandate.

5. AT Kearney Case Interview Examples

Promotion Planning – Help a national grocery and drug store chain improve its product promotion strategy.

6. PWC Case Interview Examples

Modernizing a Hotel’s Loyalty Platform – Help simplify and modernize the platform, providing customers with immediate access to their data.

Green Energy – Help an energy company transition to net zero greenhouse gas emissions.

Nonprofit Impact – Help a community organization respond to client needs during the pandemic.

Love at First Byte – Help a data management client comply with new regulations.

Prioritizing Ethics and Integrity – Help a software company leverage data analytics to comply with regulations.

7. Accenture Case Interview Examples

Sustainability – Help drive sustainability for an auto manufacturer.

IT integration strategy – Driving merger integration by linking technology systems.

We have more on how to Accenture Case Interviews in our article.

8. Capital One Case Interview Examples

Ice Cream Corporation – Help the president of Ice Cream Corporation grow profits.

9. Oliver Wyman Case Interview Examples

Wumbleworld – Help a China-based theme park operator identify the reasons for declining profits and develop options for reversing the trend.

Aqualine – Help a manufacturer of small power boats determine why its sales growth has slowed and identify opportunities to boost sales.

10. LEK Case Interview Examples

Theater chain – Help a large theater chain identify revenue growth opportunities.

Free Online Case Interview Examples from Consulting Clubs

Need more case interview examples? Here are links to MBA case books compiled by INSEAD, Harvard, Wharton, Darden, and several other business schools.

Recent Consulting Case Interview Examples

• Darden School Of Business 2021-2022 Casebook
• NYU Stern MCA 2020-2021 Casebook
• The Duke MBA Consulting Club Casebook 2021-2022
• Notre Dame Casebook 2022
• Kellogg Consulting Club 2020 Casebook
• FMS Consulting Casebook 2021-22
• INSEAD Consulting Club Casebook 2021
• IIMC Consulting Casebook 2021-22
• UCLA Case Book 2019 – 2020
• Columbia Business School 2021 Casebook
• IIM Lucknow Casebook 2022
• Cornell MBA Johnson Consulting Club Casebook 2020-2021
• Darden School Of Business 2020-2021 Casebook

Older Consulting Case Interview Examples

• 2019 Berkeley Haas School of Business Consulting Club Interview Preparation Guide and Case Interview Examples
• The Duke MBA Consulting Club Casebook 2018-2019
• 2017-2018 McCombs University of Texas at Austin Consulting Case Interview Examples
• Columbia Business School Management Consulting Association Case Interview Examples 2017
• Duke Fuqua School of Business MBA Consulting Case Interview Examples 2016-2017
• NYU Stern MBA MCA Case Interview Examples: 2017
• UCLA Anderson School of Management Consulting Association Case Interview Examples 2015-2015
• Darden Consulting Club Case Interview Examples: 2014-2015
• Yale Life Sciences Consulting Case Interview Examples 2014
• ESADE MBA Consulting Club Case Interview Examples 2014
• Darden Consulting Case Interview Examples: 2012-2013 Edition
• Kellogg Consulting Club Case Interview Examples and Interview Guide: 2012 Edition

Even More Consulting Case Interview Examples

• The Cornell Consulting Club Interview Interview Examples
• Harvard Business School Management Consulting Club Case Interview Examples
• The MIT Sloan School of Management Consulting Club Case Interview Examples and Interview Guide – October 2001
• The Berkeley MBA Haas Consulting Club 2006 Case Interview Examples
• London Business School – The 2006 Consulting Club Case Interview Examples 
• Columbia Business School Management Consulting Association Case Interview Examples – 2006
• Torch the Case – The NYU Stern Consulting Case Interview Examples – 2007 edition 
• Michigan – the Ross School of Business Consulting Club 2010 Case Interview Examples
• Wharton Case Interview Examples by the Wharton Consulting Club – December 2010
• The Duke MBA Consulting Club Case Interview Examples – 2010-2011
• Case Interview Examples by the ESADE MBA Consulting Club 2011  
• INSEAD Consulting Club Handbook and Case Interview Examples – 2011

Still have questions?

If you still have questions on case interview examples, leave them in the comments below. We’ll ask our My Consulting Offer coaches and get back to you with answers.

We have tons of other articles to help you get an offer from one of the top consulting firms. Check out our pages on:

• Case Interview Math
• Case Interview Types
• Case Interview Formulas
• Market Sizing Questions

Help with Case Study Interview Preparation

Thanks for turning to My Consulting Offer for advice on case study interview prep. My Consulting Offer has helped almost 89.6% of the people we’ve worked with get a job with top management consulting like Bain, BCG and McKinsey .  For example, here is how Conor was able to get his BCG offer after previously failing.

If you want a step-by-step solution to land more offers from consulting firms, then  grab the free video training series below.  It’s been created by former Bain, BCG, and McKinsey Consultants, Managers and Recruiters.

It contains the EXACT solution used by over 700 of our clients to land offers.

The best part?

It’s absolutely free. Just put your name and email address in and you’ll have instant access to the training series.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

© My CONSULTING Offer

3 Top Strategies to Master the Case Interview in Under a Week

We are sharing our powerful strategies to pass the case interview even if you have no business background, zero casing experience, or only have a week to prepare.

No thanks, I don't want free strategies to get into consulting.

We are excited to invite you to the online event., where should we send you the calendar invite and login information.

• Skip to main content

Crafting Cases

Main Content

Why do 97% of candidates get rejected from mckinsey, bcg and bain.

(Hint: they haven’t learned how to think and speak like real MBB consultants)

Memorizing frameworks and lists of questions may help you get started on your case interviews, but they eventually drive your offers away.

Join our free  7-day course to go beyond the basics and learn how to answer ANY   case interview question (even of case types and industries you haven’t seen before).

If you prepare like the average candidate, you will get average results

Most candidates start their case interview preparation following trusted resources.  You’ve all heard of them: Case in Point, Victor Cheng, etc.

They work well when you’re starting out.  We’ve used them ourselves back when we were preparing.  

The problem?   They can only get you so far…

The problem with traditional case interview approaches

We’ve met tons of smart people doing all they could to be top performers…

• They've read every book on the topic
• They've spent hours and hours learning different frameworks
• They've practiced dozens (even hundreds) of cases

So, why weren’t they performing well enough to get offers from top consulting firms yet?

Here’s why:

• While basic resources cover the basics well, they never teach you how to think like a consultant
• Interviewers are assessing nuanced thought patterns that aren't taught in those books
• It's like trying to learn calculus from a basic math book - helpful, but not enough for the whole journey

There are four key issues with traditional approaches...

They show you many frameworks to memorize, but never teach you how to build a custom structure for each case, as real management consultants do.

They give case examples that fit their methods perfectly, but ignore those that don’t (e.g. Public Sector) and pretend they’re uncommon in real interviews.

Even though they used to help candidates perform well in the past (when everyone was less prepared), they’ve become commoditized and can only get you to average nowadays.

They expose you to a lot of concepts and buzzwords (MECE, 80/20, Hypothesis), but never teach you the systems to apply them in a cohesive, systematic way in your cases.

Here's how we're different:

No more learning plateaus.  You’ll get a  structured method to learn case interviews. Much better than “just doing more cases” and hoping for the best.

Tools and techniques straight from the consulting job.  Instead of arbitrary “tips and tricks”, we teach techniques that come from the real job and work not only in case interviews, but also with real clients. 

Eliminate guesswork with out step-by-step systems.  We teach you how to be MECE, how to build your own frameworks and everything else you need in  a step-by-step way .

Tons of in-depth, well explained examples.  This helps you go beyond “conceptual knowledge” and understand the nuances of when and how to apply what you’ve learned.

Insights from your interviewer’s mind.  Learn not only what  to do, but also why  you should do it. You’ll grasp how interviewers think and feel like you could read their minds .

Learn by doing.  Every time we teach you a new tactic or technique, we also guide you through the application of that into a case problem so you can internalize what you learn.

Who are we?

We’re Bruno and Julio. We used to be consultants at McKinsey and Bain. 

We went through the very same preparation process you’re going through right now. As we studied for our cases, we were often frustrated with the lack of depth of all the case prep content we found online. 

We always felt like a piece of the puzzle was missing.

After we were out, we became case interview coaches, and felt that frustration crawl up our skins again. Many of our clients found it difficult to find good prep materials and we often had nowhere to point them to when they needed to learn a specific concept.

After coaching about 200 candidates over thousands of coaching sessions, we decided to do something about it. Combining our experience as candidates, consultants and coaches, we create the types of materials we wish existed back when we were preparing.

Learn more about us here.

What other candidates say...

What are you waiting for?

Our best articles.

The Definitive Guide to Issue Trees

This is the ultimate resource to learn how to build Issue Trees, you’ll learn:

• The 3 best techniques to build Issue Trees
• The 6 principles your Issue Trees must incorporate
• Examples, best practices and common mistakes
• 4 types of practicing drills you can use to internalize thinking with Issue Trees

If you’ve been trying to learn Issue Trees, look no further.  Read the guide here.

The 9 VERY BEST case interview examples from the web, carefully curated, reviewed and commented

Not having to watch random case interview example videos will save you up to 20 hours of practice AND will also steer you away from the (many) unrealistic, even misleading examples out there.

This not only is a carefully curated list, but also has comments on super-important specific topics on the case and on the candidate’s performance that you could otherwise miss completely.

The 5 Ways to be MECE in Case Interviews

Every rookie case interviewer we’ve met mentions they wish they could improve on one of these three things before their interviews: To know how to start any case, no matter how uncommon (maybe not with the best structure, but at

The overpreparation myth

To prepare or not to prepare, that is the question” – Case Interview Hamlet Back when I was a candidate I constantly feared I was preparing too much. What a strange thing to fear, isn’t it? I had never felt

The Toothbrush Test: How to measure how insightful your structures are

I remember back when I was a candidate how much I appreciated good feedback given by other candidates. You know it when you see it: those that point out specifically to what you did wrong, why it wasn’t the best

Three cases per hour: how to harness the power of drills to get both quantity AND quality

What if you could do three cases per hour of practice? And what if these three cases were actual quality practice? “You can’t be serious, Bruno. No one can pull off that many cases per hour. Doing cases is time-consuming, you

Check out the best videos from our Youtube channel!

Hacking the Case Interview

Case interview frameworks or consulting frameworks are arguably the most critical component of a case interview. Outstanding case frameworks   set you up for success for the case while poor frameworks make the case difficult to solve.

Struggling on how to use frameworks in your case interviews? Unsure of which frameworks to use?

Don't worry because we have you covered! We'll teach you step-by-step, how to craft tailored and unique frameworks for any case interview situation.

By the end of this article, you will learn four different strategies on how to create unique and tailored frameworks for any case interview.

Strategy #1: Creating Frameworks from Scratch

• Strategy #2: Memorizing 8 – 10 Broad Business Areas
• Strategy #3: Breaking Down Stakeholders
• Strategy #4: Breaking Down Processes
• Strategy #5: Two-Part MECE Frameworks

You will apply these strategies to learn how to create case frameworks for the six most common types of case interviews.

Profitability Framework

Market entry framework, merger and acquisition framework, pricing framework, new product framework, market sizing framework.

You will also learn six consulting frameworks that nearly every consultant knows.

Porter’s Five Forces Framework

Swot framework, 4 p’s framework, 3 c’s / business situation framework, bcg 2x2 matrix framework, mckinsey 7s framework.

If you’re looking for a step-by-step shortcut to learn case interviews quickly, enroll in our case interview course . These insider strategies from a former Bain interviewer helped 30,000+ land consulting offers while saving hundreds of hours of prep time.

What is a Case Interview Framework?

A case interview framework is simply a tool that helps you structure and break down complex problems into simpler, smaller components. Think of a framework as brainstorming different ideas and organizing them into different categories.

Let’s look at an example: Coca-Cola is a large manufacturer and retailer of non-alcoholic beverages, such as sodas, juices, sports drinks, and teas. They are looking to grow and are considering entering the beer market in the United States. Should they enter?

In order for you to decide whether Coca-Cola should enter the beer market, you likely have many different questions you’d like to ask:

• Does Coca-Cola know how to produce beer?
• Would people buy beer made by Coca-Cola?
• Where would Coca-Cola sell its beer?
• How much would it cost to enter the beer market?
• Will Coca-Cola be profitable from selling beer?
• How would Coca-Cola outcompete competitors?
• What is the size of the beer market in the United States?

This is not a very structured way of thinking through the case. The questions are listed in no particular order. Additionally, many of the questions are similar to one another and could be grouped together.

A case framework would provide a structure to organize these ideas and questions in a way that is easy to understand.

A framework for this case might look like the following.

Notice that we have simplified the list of questions we had into four main categories. These broad categories are frequently called framework “buckets.” Also notice that we have grouped similar questions together under each framework bucket.

This case framework tells us what areas we need to explore in order to make a recommendation to Coca-Cola. It also clearly shows what questions we need to answer under each area.

This is the power of a case interview framework. It simplifies a complex business problem into smaller and separate components that we can tackle one at a time.

So how do you develop a case framework? The next section will reveal four robust strategies for creating unique and tailored consulting frameworks for any case interview.

Case Interview Framework Strategies

There are four case interview framework strategies you should have in your toolkit:  

When given a case interview, you will need to decide which framework strategy you want to use. Some framework strategies will be more effective than others depending on what type of case interview you get.

Therefore, choose the case framework strategy that is easiest for you given the type of case that you get.

This case framework strategy can be used for any type of case. This is the most time-consuming strategy, but yields case frameworks that are the most tailored and unique for the given case interview.

To create a framework from scratch, ask yourself what 3 – 4 statements must be true for you to be 100% confident in your recommendation. These 3 – 4 areas will become the buckets in your framework.

Once you have your framework buckets, brainstorm a few questions for each bucket that you need answers to.

Let’s return to the Coca-Cola case example in which we are asked to determine whether or not they should enter the beer market. What 3 – 4 statements must be true for us to recommend that Coca-Cola should enter the beer market?

The four major statements that must be true are:

• The beer market is an attractive market
• Competitors in the market are weak
• Coca-Cola has the capabilities to produce outstanding beer
• Coca-Cola will be highly profitable from entering the beer market

These will be the major areas or buckets in our framework.

Next, let’s add a few bullet points under each area to add more detail to our case framework.

To determine whether the beer market is attractive, we would need to know the market size, the market growth rate, and the average profit margins in the market.

To assess whether the market is competitive, we would need to know who the competitors are, how much market share they have, and if they have any differentiation or competitive advantages.

To decide whether Coca-Cola has the capabilities to produce beer, we need to know if there are any capability gaps or if there are significant synergies that Coca-Cola can leverage.

Finally, to determine the expected profitability of entering the market, we would need to know what expected revenues are, what expected costs are, and how long it would take Coca-Cola to break even.

This gives us our case framework.

You can repeat this process for any case interview that you get to create an outstanding case framework.

Strategy #2: Memorizing 8 – 10 Broad Business Areas to Make a Framework

Creating case frameworks from scratch can be quite time-consuming. Because of this, many interview candidates make the mistake of using memorized frameworks for case interviews.

Candidates will either use a single memorized framework for every case or memorize a different framework for every type of case interview.

The issue with using memorized frameworks is that they aren’t tailored to the specific case you are solving for. When given an atypical business problem, your framework areas or buckets will not be entirely relevant.

A poor framework makes the case interview significantly more difficult to solve.

Additionally, Interviewers can easily tell that you are regurgitating memorized information and not thinking critically.

Instead of creating frameworks from scratch each time, this second case framework strategy provides a method to speed up the process while still creating frameworks that are unique and tailored to the case. Additionally, you won’t need to memorize multiple different frameworks.

First, memorize a list of 8 - 10 broad business areas, such as the following:

When given a case, mentally run through this list and pick the 3 - 5 areas that are most relevant to the case.

This will be your framework.

If the list does not give you enough areas for your framework, brainstorm and add your own ideas as areas to your framework.

Finally, add a few bullet points under each area to add more detail to your case framework.

This strategy guarantees that your framework elements are relevant to the case. It also demonstrates that you can create unique, tailored frameworks for every business problem.

Let’s return to the Coca-Cola case example in which we are asked to determine whether or not they should enter the beer market.

Running through our list of memorized framework areas, the following six areas would be relevant:

• Market attractiveness : Is the beer market attractive?
• Competitive landscape : How tough is competition?
• Company capabilities : Does Coca-Cola have the capabilities to enter the market?
• Profitability : Will Coca-Cola be profitable from entering the market?
• Risks : What are the risks of entering the market?
• Strategic alternatives : Are there other more attractive markets Coca-Cola should enter?

You can pick 3 – 5 of these areas as the basis for your framework.

This strategy is a shortcut for creating unique and tailored frameworks for every business problem. Even if you and a friend used this same strategy, you both may end up with different frameworks.

That is completely fine. As long as the buckets in your framework are major areas and are relevant to the case, your case framework will be significantly better than most candidates’ frameworks.

You do not need to develop a framework entirely from scratch every time to create outstanding case frameworks. This case framework strategy can be applied to over 90% of case interviews.

For the remaining 10% of case interviews, you will need to learn and use the next two case interview framework strategies.

Strategy #3: Breaking Down Stakeholders to Make a Framework

The first two case framework strategies can be applied to over 90% of cases. However, some cases may require you to identify and focus on various stakeholders that are involved in running or operating a business.

For these cases, the primary areas of your case framework will be these major stakeholders.

Let’s take a look at an example: Your client is a non-profit blood bank. They have volunteer nurses that go to schools and companies to collect blood from donors. They then sell this blood to hospitals, which use this blood for emergency situations when a blood transfusion is required. Currently, Hearts4Lives is not profitable because they are not able to collect enough blood to sell to their hospital partners. What can they do to fix this?

This case involves many different stakeholders:

• Volunteer nurses
• Blood donors
• Schools and companies

For cases in which many different stakeholders are involved, it will be useful to look at each stakeholder and determine what each could do to address the problem.

One potential framework could look like the following:

Strategy #4: Breaking Down Processes to make a Framework

Similar to the previous case framework strategy, some cases may require you to focus on improving or optimizing a particular process.

For these cases, the primary areas of your case framework will be each major step of the process.

Let’s take a look at an example: Your client is a waste disposal company that manages a fleet of drivers and garbage trucks that go to residential homes, collect garbage, and then dump the garbage in city landfills. They have an obligation to collect each home’s garbage once a week. Recently, they have been failing to meet this requirement and are backed up with garbage disposal requests. What is causing this issue and what should they do to fix it?

For cases involving processes and efficiencies, it can be helpful to look at the different components or steps in the process.

We can think about the process of collecting and disposing of garbage in the following steps:

• Get in a garbage truck
• Drive along a designated route
• Collect garbage at each stop
• Dispose of the garbage in the landfill

Using these steps as the primary areas of our framework, we can create the following case framework:

Once you have systematically listed all of the steps in a process, you can identify the pain points or bottlenecks that are causing the issue and determine ways to improve the process.

Strategy #5: Two-part MECE Frameworks

An easy way to make a 100% MECE framework is to use a two-part MECE framework. For the first step, start with a X and Not X framework. Some examples include:

• Internal / external
• Short-term / long-term
• Economic / non-economic
• Quantitative / qualitative
• Direct / indirect
• Supply-side / demand-side
• Upside / downside
• Benefits / cost

There are probably hundreds more frameworks that follow this pattern.

These frameworks are by definition 100% MECE. Since all of these frameworks are X or Not-X, they are mutually exclusive. There is no redundancy or overlap between X and Not-X.

Together, X and Not-X are also completely exhaustive. They cover the universe of all ideas and possibilities.

The X and Not-X framework by itself is good enough for a lot of the questions you could get asked in a case interview.

If you’re asked to brainstorm ways to decrease costs, you can create a framework consisting of decreasing variable costs and decreasing non-variable costs, also known as fixed costs.

If you’re asked to brainstorm barriers to entry, you can create a framework consisting of economic barriers to entry, such as cash and equipment, and non-economic barriers to entry, such as brand name or distribution channels.

However, to take your framework to the next level and truly impress your interviewer, we have the option of doing step two.

Step two involves adding another layer of X and Not X into your framework. What do we mean by this?

Let’s say you are trying to help a city decide whether they should host the upcoming summer Olympics. You start off with a framework consisting of benefits and costs. You can take this framework to the next level by adding another layer, such as adding in short-term and long-term.

With this additional layer, your framework now has four categories: short-term benefits, long-term benefits, short-term costs, and long-term costs. This is a 100% MECE framework that enables you to think through all possible considerations in deciding whether a city should host the Olympics.

Let’s look at another example. Suppose you are trying to figure out how to reduce a company’s costs. You start with a framework consisting of variable costs and fixed costs. You can take this framework to the next level by adding another layer, such as direct and indirect.

With this additional layer, your framework now has four categories: ways to directly reduce variable costs, ways to indirectly reduce variable costs, ways to directly reduce fixed costs, and ways to indirectly reduce fixed costs. This is another 100% MECE framework.

Case Frameworks: The 6 Most Common Frameworks

There are six common case frameworks in consulting case interviews.  

Profitability frameworks are the most common types of frameworks you’ll likely use in consulting first round interviews.

A profitability case might look like this: “An electric car manufacturer has recently been experiencing a decline in profits. What should they do?”

There are two steps to solving a profitability case.

First, you need to understand quantitatively, what is the driver causing the decline in profits?

You should know the following basic profit formulas.

Is the decline in profitability due to a decline in revenue, an increase in costs, or both?

On the revenue side, what is causing the decline? Is it from a decrease in quantity of units sold? If so, is the decrease concentrated in a particular product line, geography, or customer segment?

Or is the decline due to a decrease in price? Are we selling products at a lower price? Is there a sales mix change? In other words, are we selling more low-priced products and fewer high-priced products?

On the cost side, what is causing the increase in costs? Is it from an increase in variable costs? If so, which cost elements have gone up?

Or is the increase in costs due to an increase in fixed costs? If so, which fixed costs have gone up?

Next, you need to understand qualitatively, what factors are driving the decline in profitability that you identified in the previous step.

Looking at customers, have customer needs or preferences changed? Have their purchasing habits or behaviors changed? Have their perceptions of the company changed?

Looking at competitors, have new players entered the market? Have existing competitors made any recent strategic moves? Are competitors also experiencing a decline in profitability?

Looking at the market, are there any market trends that we should be aware of? For example, are there new technology or regulatory changes? How do these trends impact profitability?

Putting all of this together, we get the following profitability framework.

Once you have gone through this profitability framework and understand both quantitatively what is causing the decline in profits and qualitatively why this is happening, you can begin brainstorming ideas to address the profitability issue.

Among the ideas that you brainstorm, you can prioritize which recommendations to focus on based on the level of impact and ease of implementation.

See the video below for an example of how to solve a profitability case using this profitability framework.

Market entry frameworks are the second most common types of frameworks you’ll likely use in consulting first round interviews.

A market entry case might look like this: “Coca-Cola is considering entering the beer market in the United States. Should they enter?”

To create a market entry framework, there are typically four statements that need to be true in order for you to recommend entering the market:

• The market is attractive
• Competition is weak
• The company has the capabilities to enter
• The company will be highly profitable from entering the market

These statements form the foundation of our market entry framework.

Note the logical order of the buckets in the framework.

We first want to determine whether the market is attractive. Then, we need to check if competition is weak and if there is an opportunity to capture meaningful market share.

If these two conditions are true, then we need to confirm that the company actually has the capabilities to enter the market.

Finally, even if the company has the capabilities to enter the market, we need to verify that they will be profitable from entering.

This is a logical progression that your market entry framework will take you through to develop a recommendation for market entry cases.

Merger and acquisition frameworks are also common frameworks you’ll use in consulting interviews.

There are two common business situations.

The first situation is a company looking to acquire another company in order to access a new market, access new customers, or to grow its revenues and profits.

Another situation is a private equity company looking to acquire a company as an investment. Their goal is to then grow the business using their operational expertise and then sell the company years later for a high return on investment. This type of case interview is called a private equity case interview .

In either of these situations, mergers and acquisition cases typically involve acquiring an attractive, successful company.

It is rare to get a case in which a company or private equity firm is looking to acquire a poorly performing company to purchase at a discount. Nevertheless, you can always clarify the goal of the merger or acquisition with the interviewer before beginning the case.

In order to recommend making an acquisition, four statements need to be true.  

• The market that the acquisition target is in is attractive
• The acquisition target is an attractive company
• The acquisition generates meaningful synergies
• The acquisition target is at a great price and will generate high returns on investment

These statements become the basis of our merger and acquisition framework.

Synergies is an area that should absolutely be included in any merger or acquisition framework. A merger or acquisition can lead to revenue synergies and cost synergies.

Revenue synergies include:

• Having access to new customer segments
• Having access to new markets
• Having access to new distribution channels
• Cross-selling opportunities
• Up-selling opportunities

Cost synergies include:

• Eliminating cost redundancies
• Consolidating functions or groups
• Increasing buying power with suppliers, manufacturers, distributors, or retailers

Pricing frameworks are used in cases involving the pricing of a product or service. To develop a pricing framework, you should be familiar with the three different ways to price a product or service.

• Pricing based on costs : set a price by applying a profit margin on the total costs to produce or deliver the product or service
• Pricing based on competition : set a price based on what competitors are charging for products similar to yours
• Pricing based on value added : set a price by quantifying the benefits that the product provides customers

Your answer to pricing cases will likely involve a mix of all three of these pricing strategies.

Your pricing framework will look something like the following.

Pricing based on costs will determine the minimum price you can realistically set. Pricing based on value added will determine the maximum possible price. Pricing based on competition will determine which price in between these two price points you should set.

In order to get customers to purchase your product, the difference between your price point and the customer’s maximum willingness to pay must be greater than or equal to the difference between your competitor’s price point and the customer’s maximum willingness to pay for their product.

New product frameworks are used to help a company decide whether or not to launch a product or service.

New product frameworks share many similarities with market entry frameworks. In order to recommend launching a new product, the following statements would need to be true:

• The product targets an attractive market segment
• The product meets customer needs and is superior to competitor products
• The company has the capabilities to successfully launch the product
• Launching the product will be highly profitable

Expanding on these areas, your new product framework could look like the following:

A comprehensive guide to market sizing questions and market sizing frameworks can be found in our comprehensive market sizing article. You can also watch the video below:

As a summary, market sizing or estimation questions ask you to determine the size of a particular market or to estimate a particular figure.

There are two different market sizing frameworks or approaches:

• Top-down approach : start with a large number and then refine and break down the number until you get your answer
• Bottom-up approach : start with a small number and then build up and increase the number until you get your answer

To create your market sizing framework, simply write out in bullet points, the exact steps you would take to calculate the requested market size or estimation figure.

Consulting Frameworks Every Consultant Knows

There are six consulting frameworks that nearly every consultant knows.

I would not recommend using these exact frameworks during a case interview because the interviewer may think you are just regurgitating memorized information instead of thinking critically about the case.

Instead use the four framework strategies that we covered earlier in this article to create tailored and unique frameworks for each case.

Nevertheless, it is helpful to review these common consulting frameworks in order to understand the fundamental concepts and business principles behind them.

Porter’s Five Forces framework was developed by Harvard Business School professor Michael Porter. This framework is used to analyze the attractiveness of a particular industry.

There are five forces that determine whether an industry is attractive or unattractive.

Competitive rivalry:  How competitive is the industry?

The more competitive an industry is in terms of number and strength of competitors, the less attractive the industry is. The less competitive an industry is, the more attractive the industry is.

Supplier power:  How much power do suppliers have?

Suppliers are companies that provide the raw materials for your company to produce goods or services. The fewer suppliers there are, the more bargaining power suppliers have in setting prices. The more suppliers there are, the weaker bargaining power suppliers have in setting prices.

Therefore, high supplier power makes the industry less attractive while low supplier power makes the industry more attractive.   

Buyer power:  How much power do buyers have?

Buyers are customers or companies that purchase your company’s product. The more buyers there are, the weaker bargaining power buyers have in setting prices. The fewer buyers there are, the more bargaining power buyers have in setting prices.

Therefore, high buyer power makes the industry less attractive while low buyer power makes the industry more attractive.   

Threat of substitution:  How difficult is it for customers to find and use substitutes over your product?

The availability of many substitutes makes the industry less attractive while a lack of substitutes makes the industry more attractive

Threat of new entry:  How difficult is it for new players to enter the market?

If barriers to entry are high, then it is difficult for new players to enter the market and it is easier for existing players to maintain their market share.

If barriers to entry are low, then it is easy for new players to enter the market and more difficult for existing players to maintain their market share.

A low threat of new entrants makes the market more attractive while a high threat of new entrants makes the market less attractive.

A SWOT framework is used to assess a company’s strategic position. SWOT stands for strengths, weaknesses, opportunities, and threats.

Strengths : What does the company do well? What qualities separate them from competitors?

Weaknesses : What does the company do poorly? What are the things that competitors do better?

Opportunities : Where are the company’s opportunities for growth or improvement?

Threats : Who are the most threatening competitors? What are the major risks to the company’s business?

The 4 P’s framework is used to develop a marketing strategy for a product. The 4 P’s in this framework are: product, place, promotion, and price.

Product : If there are multiple products or different versions of a product, you will need to decide which product to market. To do this, you will need to fully understand the benefits and points of differentiation of each product.

Select the product that best fits customer needs for the customer segment you are focusing on.

Place : You will need to decide where the product will be sold to customers. Different customer segments have different purchasing habits and behaviors. Therefore, some distribution channels will be more effective than others.

Should the product be sold directly to the customer online? Should the product be sold in the company’s stores? Should the product be sold through retail partners instead?

Promotion : You will need to decide how to spread information about the product to customers. Different customer segments have different media consumption habits and preferences. Therefore, some promotional strategies will be more effective than others.

Promotional techniques and strategies include advertising, social media marketing, email marketing, search engine marketing, video marketing, and public relations. Select the strategies and techniques that will be the most effective.

Price : You will need to decide how to price the product. Pricing is important because it determines the profits and the quantity of units sold. Pricing can also communicate information on the quality or value of the product.

If you price the product too high, you may be pricing the product above your customer segment’s willingness to pay. This would lead to lost sales.

If you price the product too low, you may be losing potential profit from customers who were willing to pay a higher price. You may also be losing profits from customers who perceive the product as low-quality due to a low price point.

In deciding on a price, you can consider the costs to produce the product, the prices of other similar products, and the value that you are providing to customers.

The 3 C’s framework is used to develop a business strategy for a company. 3 C’s stands for customers, competition, and company.

The business situation framework was developed by a former McKinsey consultant, Victor Cheng, who added a fourth component to this framework, product.

Both of these frameworks are used to develop a business strategy for a company in a variety of situations, such as market entry, new product launch, and acquisition.

There is another similar framework called the 4C framework that expands upon the 3 C's. The 4C framework stands for customer, competition, capabilities, and cost.

The BCG 2x2 Matrix Framework was developed by BCG founder Bruce Hendersen. It is used to examine all of the different businesses of a company to determine which businesses the company should invest in and focus on.

The BCG 2x2 Matrix has two different dimensions:

• Market growth : How quickly is the market growing?
• Relative market share : How much market share does the company have compared to competitors?

Each business of the company can be assessed on these two dimensions on a scale of low to high. This is what creates the 2x2 Matrix because it creates four different quadrants.

Each quadrant has a recommended strategy.

• Stars : These are businesses that have high market growth rate and high relative market share. These businesses should be heavily invested in so they can continue to grow.
• Cows :   These are businesses that have low market growth rate, but high relative market share. These businesses should be maintained since they are stable, profitable businesses.
• Dogs :   These are businesses that have low market growth rate and low relative market share. These businesses should not be invested in and should possibly even be divested to free up cash for other businesses.
• Unknown : These are businesses that have high market growth rate and low relative market share. The strategy for these businesses is not clear. With enough investment, these businesses could become stars. However, these businesses could also become dogs if the market growth slows or declines.

The McKinsey 7S Framework was developed by two former McKinsey consultants, Tom Peters and Robert Waterman. The 7S Framework identifies seven elements that a company needs to align on in order to be successful.

These elements are:

• Strategy : The company’s plan to grow and outcompete competitors
• Structure : The organization of the company
• Systems : The company’s daily activities and processes
• Shared values : The core beliefs, values, or mission of the company
• Style : The style of leadership or management used
• Staff : The employees that are hired
• Skills : The capabilities of the company’s employees

Land your Dream Consulting Job

Here are the resources we recommend to land your dream consulting job:

For help landing consulting interviews

• Resume Review & Editing : Transform your resume into one that will get you multiple consulting interviews

For help passing case interviews

• Comprehensive Case Interview Course (our #1 recommendation): The only resource you need. Whether you have no business background, rusty math skills, or are short on time, this step-by-step course will transform you into a top 1% caser that lands multiple consulting offers.
• Case Interview Coaching : Personalized, one-on-one coaching with a former Bain interviewer.
• Hacking the Case Interview Book   (available on Amazon): Perfect for beginners that are short on time. Transform yourself from a stressed-out case interview newbie to a confident intermediate in under a week. Some readers finish this book in a day and can already tackle tough cases.
• The Ultimate Case Interview Workbook (available on Amazon): Perfect for intermediates struggling with frameworks, case math, or generating business insights. No need to find a case partner – these drills, practice problems, and full-length cases can all be done by yourself.

For help passing consulting behavioral & fit interviews

• Behavioral & Fit Interview Course : Be prepared for 98% of behavioral and fit questions in just a few hours. We'll teach you exactly how to draft answers that will impress your interviewer.

Land Multiple Consulting Offers

Complete, step-by-step case interview course. 30,000+ happy customers.

• Moscow Oblast
•  » 
• Elektrostal

State Housing Inspectorate of the Moscow Region

Phone 8 (496) 575-02-20 8 (496) 575-02-20

Phone 8 (496) 511-20-80 8 (496) 511-20-80

Public administration near State Housing Inspectorate of the Moscow Region

Current time by city

For example, New York

Current time by country

For example, Japan

Time difference

For example, London

For example, Dubai

Coordinates

For example, Hong Kong

For example, Delhi

For example, Sydney

Geographic coordinates of Elektrostal, Moscow Oblast, Russia

Coordinates of elektrostal in decimal degrees, coordinates of elektrostal in degrees and decimal minutes, utm coordinates of elektrostal, geographic coordinate systems.

WGS 84 coordinate reference system is the latest revision of the World Geodetic System, which is used in mapping and navigation, including GPS satellite navigation system (the Global Positioning System).

Geographic coordinates (latitude and longitude) define a position on the Earth’s surface. Coordinates are angular units. The canonical form of latitude and longitude representation uses degrees (°), minutes (′), and seconds (″). GPS systems widely use coordinates in degrees and decimal minutes, or in decimal degrees.

Latitude varies from −90° to 90°. The latitude of the Equator is 0°; the latitude of the South Pole is −90°; the latitude of the North Pole is 90°. Positive latitude values correspond to the geographic locations north of the Equator (abbrev. N). Negative latitude values correspond to the geographic locations south of the Equator (abbrev. S).

Longitude is counted from the prime meridian ( IERS Reference Meridian for WGS 84) and varies from −180° to 180°. Positive longitude values correspond to the geographic locations east of the prime meridian (abbrev. E). Negative longitude values correspond to the geographic locations west of the prime meridian (abbrev. W).

UTM or Universal Transverse Mercator coordinate system divides the Earth’s surface into 60 longitudinal zones. The coordinates of a location within each zone are defined as a planar coordinate pair related to the intersection of the equator and the zone’s central meridian, and measured in meters.

Elevation above sea level is a measure of a geographic location’s height. We are using the global digital elevation model GTOPO30 .

Elektrostal , Moscow Oblast, Russia

MOSCOW - RUSSIA

Ewf b.v east west forwarding.

Edelveis, Right Entrance, 2nd Floor Davidkovskaja, 121352 Moscow, Russia

• Phone: +7 495 938-99-66
• Mobile: +7 495-997-0977
• Fax: +7 495 938-99-67
• email: [email protected]
• web: www.eastwestforwarding.com

Company Profile

• LIST WITH US

The Unique Burial of a Child of Early Scythian Time at the Cemetery of Saryg-Bulun (Tuva)

<< Previous page

Pages:  379-406

In 1988, the Tuvan Archaeological Expedition (led by M. E. Kilunovskaya and V. A. Semenov) discovered a unique burial of the early Iron Age at Saryg-Bulun in Central Tuva. There are two burial mounds of the Aldy-Bel culture dated by 7th century BC. Within the barrows, which adjoined one another, forming a figure-of-eight, there were discovered 7 burials, from which a representative collection of artifacts was recovered. Burial 5 was the most unique, it was found in a coffin made of a larch trunk, with a tightly closed lid. Due to the preservative properties of larch and lack of air access, the coffin contained a well-preserved mummy of a child with an accompanying set of grave goods. The interred individual retained the skin on his face and had a leather headdress painted with red pigment and a coat, sewn from jerboa fur. The coat was belted with a leather belt with bronze ornaments and buckles. Besides that, a leather quiver with arrows with the shafts decorated with painted ornaments, fully preserved battle pick and a bow were buried in the coffin. Unexpectedly, the full-genomic analysis, showed that the individual was female. This fact opens a new aspect in the study of the social history of the Scythian society and perhaps brings us back to the myth of the Amazons, discussed by Herodotus. Of course, this discovery is unique in its preservation for the Scythian culture of Tuva and requires careful study and conservation.

Keywords: Tuva, Early Iron Age, early Scythian period, Aldy-Bel culture, barrow, burial in the coffin, mummy, full genome sequencing, aDNA

Information about authors: Marina Kilunovskaya (Saint Petersburg, Russian Federation). Candidate of Historical Sciences. Institute for the History of Material Culture of the Russian Academy of Sciences. Dvortsovaya Emb., 18, Saint Petersburg, 191186, Russian Federation E-mail: [email protected] Vladimir Semenov (Saint Petersburg, Russian Federation). Candidate of Historical Sciences. Institute for the History of Material Culture of the Russian Academy of Sciences. Dvortsovaya Emb., 18, Saint Petersburg, 191186, Russian Federation E-mail: [email protected] Varvara Busova  (Moscow, Russian Federation).  (Saint Petersburg, Russian Federation). Institute for the History of Material Culture of the Russian Academy of Sciences.  Dvortsovaya Emb., 18, Saint Petersburg, 191186, Russian Federation E-mail:  [email protected] Kharis Mustafin  (Moscow, Russian Federation). Candidate of Technical Sciences. Moscow Institute of Physics and Technology.  Institutsky Lane, 9, Dolgoprudny, 141701, Moscow Oblast, Russian Federation E-mail:  [email protected] Irina Alborova  (Moscow, Russian Federation). Candidate of Biological Sciences. Moscow Institute of Physics and Technology.  Institutsky Lane, 9, Dolgoprudny, 141701, Moscow Oblast, Russian Federation E-mail:  [email protected] Alina Matzvai  (Moscow, Russian Federation). Moscow Institute of Physics and Technology.  Institutsky Lane, 9, Dolgoprudny, 141701, Moscow Oblast, Russian Federation E-mail:  [email protected]

Shopping Cart Items: 0 Cart Total: 0,00 € place your order

Price pdf version

student - 2,75 € individual - 3,00 € institutional - 7,00 €

Copyright В© 1999-2022. Stratum Publishing House