how to write quote in research paper

Quoting and integrating sources into your paper

In any study of a subject, people engage in a “conversation” of sorts, where they read or listen to others’ ideas, consider them with their own viewpoints, and then develop their own stance. It is important in this “conversation” to acknowledge when we use someone else’s words or ideas. If we didn’t come up with it ourselves, we need to tell our readers who did come up with it.

It is important to draw on the work of experts to formulate your own ideas. Quoting and paraphrasing the work of authors engaged in writing about your topic adds expert support to your argument and thesis statement. You are contributing to a scholarly conversation with scholars who are experts on your topic with your writing. This is the difference between a scholarly research paper and any other paper: you must include your own voice in your analysis and ideas alongside scholars or experts.

All your sources must relate to your thesis, or central argument, whether they are in agreement or not. It is a good idea to address all sides of the argument or thesis to make your stance stronger. There are two main ways to incorporate sources into your research paper.

Quoting is when you use the exact words from a source. You will need to put quotation marks around the words that are not your own and cite where they came from. For example:

“It wasn’t really a tune, but from the first note the beast’s eyes began to droop . . . Slowly the dog’s growls ceased – it tottered on its paws and fell to its knees, then it slumped to the ground, fast asleep” (Rowling 275).

Follow these guidelines when opting to cite a passage:

• Choose to quote passages that seem especially well phrased or are unique to the author or subject matter.
• Be selective in your quotations. Avoid over-quoting. You also don’t have to quote an entire passage. Use ellipses (. . .) to indicate omitted words. Check with your professor for their ideal length of quotations – some professors place word limits on how much of a sentence or paragraph you should quote.
• Before or after quoting a passage, include an explanation in which you interpret the significance of the quote for the reader. Avoid “hanging quotes” that have no context or introduction. It is better to err on the side of your reader not understanding your point until you spell it out for them, rather than assume readers will follow your thought process exactly.
• If you are having trouble paraphrasing (putting something into your own words), that may be a sign that you should quote it.
• Shorter quotes are generally incorporated into the flow of a sentence while longer quotes may be set off in “blocks.” Check your citation handbook for quoting guidelines.

Paraphrasing is when you state the ideas from another source in your own words . Even when you use your own words, if the ideas or facts came from another source, you need to cite where they came from. Quotation marks are not used. For example:

With the simple music of the flute, Harry lulled the dog to sleep (Rowling 275).

Follow these guidelines when opting to paraphrase a passage:

• Don’t take a passage and change a word here or there. You must write out the idea in your own words. Simply changing a few words from the original source or restating the information exactly using different words is considered plagiarism .
• Read the passage, reflect upon it, and restate it in a way that is meaningful to you within the context of your paper . You are using this to back up a point you are making, so your paraphrased content should be tailored to that point specifically.
• After reading the passage that you want to paraphrase, look away from it, and imagine explaining the main point to another person.
• After paraphrasing the passage, go back and compare it to the original. Are there any phrases that have come directly from the original source? If so, you should rephrase it or put the original in quotation marks. If you cannot state an idea in your own words, you should use the direct quotation.

A summary is similar to paraphrasing, but used in cases where you are trying to give an overview of many ideas. As in paraphrasing, quotation marks are not used, but a citation is still necessary. For example:

Through a combination of skill and their invisibility cloak, Harry, Ron, and Hermione slipped through Hogwarts to the dog’s room and down through the trapdoor within (Rowling 271-77).

Important guidelines

When integrating a source into your paper, remember to use these three important components:

• Introductory phrase to the source material : mention the author, date, or any other relevant information when introducing a quote or paraphrase.
• Source material : a direct quote, paraphrase, or summary with proper citation.
• Analysis of source material : your response, interpretations, or arguments regarding the source material should introduce or follow it. When incorporating source material into your paper, relate your source and analysis back to your original thesis.

Ideally, papers will contain a good balance of direct quotations, paraphrasing and your own thoughts. Too much reliance on quotations and paraphrasing can make it seem like you are only using the work of others and have no original thoughts on the topic.

Always properly cite an author’s original idea, whether you have directly quoted or paraphrased it. If you have questions about how to cite properly in your chosen citation style, browse these citation guides . You can also review our guide to understanding plagiarism .

University Writing Center

The University of Nevada, Reno Writing Center provides helpful guidance on quoting and paraphrasing and explains how to make sure your paraphrasing does not veer into plagiarism. If you have any questions about quoting or paraphrasing, or need help at any point in the writing process, schedule an appointment with the Writing Center.

Works Cited

Rowling, J.K. Harry Potter and the Sorcerer's Stone.  A.A. Levine Books, 1998.

A direct quotation reproduces words verbatim from another work or from your own previously published work. It is best to paraphrase sources rather than directly quoting them because paraphrasing allows you to fit material to the context of your paper and writing style.

Use direct quotations rather than paraphrasing:

• when reproducing an exact definition (see Section 6.22 of the Publication Manual ),
• when an author has said something memorably or succinctly, or
• when you want to respond to exact wording (e.g., something someone said).

Instructors, programs, editors, and publishers may establish limits on the use of direct quotations. Consult your instructor or editor if you are concerned that you may have too much quoted material in your paper.

This page addresses how to format short quotations and block quotations. Additional information is available about how to:

• include page numbers for quotations
• cite quotations from material without page numbers
• cite quotations that include errors
• indicate changes to quotations
• present quotations from research participants

Quotations are covered in the seventh edition APA Style manuals in the Publication Manual Sections 8.25 to 8.35 and the Concise Guide Sections 8.25 to 8.34

Related handout

• In-Text Citation Checklist (PDF, 227KB)

Short quotations (fewer than 40 words)

For quotations of fewer than 40 words, add quotation marks around the words and incorporate the quote into your own text—there is no additional formatting needed. Do not insert an ellipsis at the beginning and/or end of a quotation unless the original source includes an ellipsis.

Effective teams can be difficult to describe because “high performance along one domain does not translate to high performance along another” (Ervin et al., 2018, p. 470).

For a direct quotation, always include a full citation ( parenthetical or narrative ) in the same sentence as the quotation, including the page number (or other location information, e.g., paragraph number).

• Place a parenthetical citation either immediately after the quotation or at the end of the sentence.
• For a narrative citation, include the author and year in the sentence and then place the page number or other location information in parentheses after the quotation.
• If the quotation precedes the narrative citation, put the page number or location information after the year and a comma.
• If the citation appears at the end of a sentence, put the end punctuation after the closing parenthesis for the citation.
• If the quotation includes citations, see Section 8.32 of the Publication Manual .
• If the quotation includes material already in quotation marks, see Section 8.33 of the Publication Manual .
• Place periods and commas within closing single or double quotation marks. Place other punctuation marks inside quotation marks only when they are part of the quoted material.

Block quotations (40 words or more)

Format quotations of 40 words or more as block quotations:

• Do not use quotation marks to enclose a block quotation.
• Start a block quotation on a new line and indent the whole block 0.5 in. from the left margin.
• Double-space the entire block quotation.
• Do not add extra space before or after it.
• If there are additional paragraphs within the quotation, indent the first line of each subsequent paragraph an additional 0.5 in. See an example in Section 8.27 of the Publication Manual .
• Either (a) cite the source in parentheses after the quotation’s final punctuation or (b) cite the author and year in the narrative before the quotation and place only the page number in parentheses after the quotation’s final punctuation.
• Do not add a period after the closing parenthesis in either case.

Block quotation with parenthetical citation:

Researchers have studied how people talk to themselves:

Inner speech is a paradoxical phenomenon. It is an experience that is central to many people’s everyday lives, and yet it presents considerable challenges to any effort to study it scientifically. Nevertheless, a wide range of methodologies and approaches have combined to shed light on the subjective experience of inner speech and its cognitive and neural underpinnings. (Alderson-Day & Fernyhough, 2015, p. 957)

Block quotation with narrative citation:

Flores et al. (2018) described how they addressed potential researcher bias when working with an intersectional community of transgender people of color:

Everyone on the research team belonged to a stigmatized group but also held privileged identities. Throughout the research process, we attended to the ways in which our privileged and oppressed identities may have influenced the research process, findings, and presentation of results. (p. 311)

Have a thesis expert improve your writing

Check your thesis for plagiarism in 10 minutes, generate your apa citations for free.

• Knowledge Base
• Working with sources
• How to Quote | Citing Quotes in Harvard & APA

How to Quote | Citing Quotes in Harvard & APA

Published on 15 April 2022 by Shona McCombes and Jack Caulfield. Revised on 3 September 2022.

Quoting means copying a passage of someone else’s words and crediting the source. To quote a source, you must ensure:

• The quoted text is enclosed in quotation marks (usually single quotation marks in UK English, though double is acceptable as long as you’re consistent) or formatted as a block quote
• The original author is correctly cited
• The text is identical to the original

The exact format of a quote depends on its length and on which citation style you are using. Quoting and citing correctly is essential to avoid plagiarism , which is easy to detect with a good plagiarism checker .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to cite a quote in harvard and apa style, introducing quotes, quotes within quotes, shortening or altering a quote, block quotes, when should i use quotes, frequently asked questions about quoting sources.

Every time you quote, you must cite the source correctly . This looks slightly different depending on the citation style you’re using.

Citing a quote in Harvard style

When you include a quote in Harvard style, you must add a Harvard in-text citation giving the author’s last name, the year of publication, and a page number if available. Any full stop or comma appears after the citation, not within the quotation marks.

Citations can be parenthetical or narrative. In a parenthetical citation , you place all the information in brackets after the quote. In a narrative citation , you name the author in your sentence (followed by the year), and place the page number after the quote.

• Evolution is a gradual process that ‘can act only by very short and slow steps’ (Darwin, 1859, p. 510) . Darwin (1859) explains that evolution ‘can act only by very short and slow steps’ (p. 510) .

Complete guide to Harvard style

Citing a quote in APA Style

To cite a direct quote in APA , you must include the author’s last name, the year, and a page number, all separated by commas. If the quote appears on a single page, use ‘p.’; if it spans a page range, use ‘pp.’

An APA in-text citation can be parenthetical or narrative. In a parenthetical citation , you place all the information in parentheses after the quote. In a narrative citation , you name the author in your sentence (followed by the year), and place the page number after the quote.

Punctuation marks such as full stops and commas are placed after the citation, not within the quotation marks.

• Evolution is a gradual process that ‘can act only by very short and slow steps’ (Darwin, 1859, p. 510) .
• Darwin (1859) explains that evolution ‘can act only by very short and slow steps’ (p. 510) .

Complete guide to APA

The only proofreading tool specialized in correcting academic writing.

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Make sure you integrate quotes properly into your text by introducing them in your own words, showing the reader why you’re including the quote and providing any context necessary to understand it.  Don’t  present quotations as stand-alone sentences.

There are three main strategies you can use to introduce quotes in a grammatically correct way:

• Add an introductory sentence
• Use an introductory signal phrase
• Integrate the quote into your own sentence

The following examples use APA Style citations, but these strategies can be used in all styles.

Introductory sentence

Introduce the quote with a full sentence ending in a colon . Don’t use a colon if the text before the quote isn’t a full sentence.

If you name the author in your sentence, you may use present-tense verbs, such as “states’, ‘argues’, ‘explains’, ‘writes’, or ‘reports’, to describe the content of the quote.

• In Denmark, a recent poll shows that: ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (Levring, 2018, p. 3).
• In Denmark, a recent poll shows that support for the EU has grown since the Brexit vote: ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (Levring, 2018, p. 3).
• Levring (2018) reports that support for the EU has grown since the Brexit vote: ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (p. 3).

Introductory signal phrase

You can also use a signal phrase that mentions the author or source but doesn’t form a full sentence. In this case, you follow the phrase with a comma instead of a colon.

• According to a recent poll, ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (Levring, 2018, p. 3).
• As Levring (2018) explains, ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (p. 3).

Integrated into your own sentence

To quote a phrase that doesn’t form a full sentence, you can also integrate it as part of your sentence, without any extra punctuation.

• A recent poll suggests that EU membership ‘would be backed by 55 percent of Danish voters’ in a referendum (Levring, 2018, p. 3).
• Levring (2018) reports that EU membership ‘would be backed by 55 percent of Danish voters’ in a referendum (p. 3).

When you quote text that itself contains another quote, this is called a nested quotation or a quote within a quote. It may occur, for example, when quoting dialogue from a novel.

To distinguish this quote from the surrounding quote, you enclose it in double (instead of single) quotation marks (even if this involves changing the punctuation from the original text). Make sure to close both sets of quotation marks at the appropriate moments.

Note that if you only quote the nested quotation itself, and not the surrounding text, you can just use single quotation marks.

• Carraway introduces his narrative by quoting his father: ‘ ‘ Whenever you feel like criticizing anyone, ‘ he told me, ‘ just remember that all the people in this world haven’t had the advantages that you’ve had ‘ ‘ (Fitzgerald 1).
• Carraway introduces his narrative by quoting his father: ‘”Whenever you feel like criticizing anyone,” he told me, “just remember that all the people in this world haven’t had the advantages that you’ve had “  (Fitzgerald 1).
• Carraway introduces his narrative by quoting his father: ‘“Whenever you feel like criticizing anyone,” he told me, “just remember that all the people in this world haven’t had the advantages that you’ve had”’ (Fitzgerald 1).
• Carraway begins by quoting his father’s invocation to ‘remember that all the people in this world haven’t had the advantages that you’ve had’ (Fitzgerald 1).

Note:  When the quoted text in the source comes from another source, it’s best to just find that original source in order to quote it directly. If you can’t find the original source, you can instead cite it indirectly .

Often, incorporating a quote smoothly into your text requires you to make some changes to the original text. It’s fine to do this, as long as you clearly mark the changes you’ve made to the quote.

Shortening a quote

If some parts of a passage are redundant or irrelevant, you can shorten the quote by removing words, phrases, or sentences and replacing them with an ellipsis (…). Put a space before and after the ellipsis.

Be careful that removing the words doesn’t change the meaning. The ellipsis indicates that some text has been removed, but the shortened quote should still accurately represent the author’s point.

Altering a quote

You can add or replace words in a quote when necessary. This might be because the original text doesn’t fit grammatically with your sentence (e.g., it’s in a different tense), or because extra information is needed to clarify the quote’s meaning.

Use brackets to distinguish words that you have added from words that were present in the original text.

The Latin term ‘ sic ‘ is used to indicate a (factual or grammatical) mistake in a quotation. It shows the reader that the mistake is from the quoted material, not a typo of your own.

In some cases, it can be useful to italicise part of a quotation to add emphasis, showing the reader that this is the key part to pay attention to. Use the phrase ’emphasis added’ to show that the italics were not part of the original text.

You usually don’t need to use brackets to indicate minor changes to punctuation or capitalisation made to ensure the quote fits the style of your text.

If you quote more than a few lines from a source, you must format it as a block quote . Instead of using quotation marks, you set the quote on a new line and indent it so that it forms a separate block of text.

Block quotes are cited just like regular quotes, except that if the quote ends with a full stop, the citation appears after the full stop.

To the end of his days Bilbo could never remember how he found himself outside, without a hat, a walking-stick or any money, or anything that he usually took when he went out; leaving his second breakfast half-finished and quite unwashed-up, pushing his keys into Gandalf’s hands, and running as fast as his furry feet could carry him down the lane, past the great Mill, across The Water, and then on for a mile or more. (16)

Avoid relying too heavily on quotes in academic writing . To integrate a source , it’s often best to paraphrase , which means putting the passage into your own words. This helps you integrate information smoothly and keeps your own voice dominant.

However, there are some situations in which quotes are more appropriate.

When focusing on language

If you want to comment on how the author uses language (for example, in literary analysis ), it’s necessary to quote so that the reader can see the exact passage you are referring to.

When giving evidence

To convince the reader of your argument, interpretation or position on a topic, it’s often helpful to include quotes that support your point. Quotes from primary sources (for example, interview transcripts or historical documents) are especially credible as evidence.

When presenting an author’s position or definition

When you’re referring to secondary sources such as scholarly books and journal articles, try to put others’ ideas in your own words when possible.

But if a passage does a great job at expressing, explaining, or defining something, and it would be very difficult to paraphrase without changing the meaning or losing the weakening the idea’s impact, it’s worth quoting directly.

A quote is an exact copy of someone else’s words, usually enclosed in quotation marks and credited to the original author or speaker.

To present information from other sources in academic writing , it’s best to paraphrase in most cases. This shows that you’ve understood the ideas you’re discussing and incorporates them into your text smoothly.

It’s appropriate to quote when:

• Changing the phrasing would distort the meaning of the original text
• You want to discuss the author’s language choices (e.g., in literary analysis )
• You’re presenting a precise definition
• You’re looking in depth at a specific claim

Every time you quote a source , you must include a correctly formatted in-text citation . This looks slightly different depending on the citation style .

For example, a direct quote in APA is cited like this: ‘This is a quote’ (Streefkerk, 2020, p. 5).

Every in-text citation should also correspond to a full reference at the end of your paper.

In scientific subjects, the information itself is more important than how it was expressed, so quoting should generally be kept to a minimum. In the arts and humanities, however, well-chosen quotes are often essential to a good paper.

In social sciences, it varies. If your research is mainly quantitative , you won’t include many quotes, but if it’s more qualitative , you may need to quote from the data you collected .

As a general guideline, quotes should take up no more than 5–10% of your paper. If in doubt, check with your instructor or supervisor how much quoting is appropriate in your field.

If you’re quoting from a text that paraphrases or summarises other sources and cites them in parentheses , APA recommends retaining the citations as part of the quote:

• Smith states that ‘the literature on this topic (Jones, 2015; Sill, 2019; Paulson, 2020) shows no clear consensus’ (Smith, 2019, p. 4).

Footnote or endnote numbers that appear within quoted text should be omitted.

If you want to cite an indirect source (one you’ve only seen quoted in another source), either locate the original source or use the phrase ‘as cited in’ in your citation.

A block quote is a long quote formatted as a separate ‘block’ of text. Instead of using quotation marks , you place the quote on a new line, and indent the entire quote to mark it apart from your own words.

APA uses block quotes for quotes that are 40 words or longer.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. & Caulfield, J. (2022, September 03). How to Quote | Citing Quotes in Harvard & APA. Scribbr. Retrieved 15 July 2024, from https://www.scribbr.co.uk/working-sources/quoting/

Is this article helpful?

Shona McCombes

Other students also liked, how to paraphrase | step-by-step guide & examples, how to avoid plagiarism | tips on citing sources, the 5 types of plagiarism | explanations & examples.

What this handout is about

Used effectively, quotations can provide important pieces of evidence and lend fresh voices and perspectives to your narrative. Used ineffectively, however, quotations can clutter your text and interrupt the flow of your argument. This handout will help you decide when and how to quote like a pro.

When should I quote?

Use quotations at strategically selected moments. You have probably been told by teachers to provide as much evidence as possible in support of your thesis. But packing your paper with quotations will not necessarily strengthen your argument. The majority of your paper should still be your original ideas in your own words (after all, it’s your paper). And quotations are only one type of evidence: well-balanced papers may also make use of paraphrases, data, and statistics. The types of evidence you use will depend in part on the conventions of the discipline or audience for which you are writing. For example, papers analyzing literature may rely heavily on direct quotations of the text, while papers in the social sciences may have more paraphrasing, data, and statistics than quotations.

Discussing specific arguments or ideas

Sometimes, in order to have a clear, accurate discussion of the ideas of others, you need to quote those ideas word for word. Suppose you want to challenge the following statement made by John Doe, a well-known historian:

“At the beginning of World War Two, almost all Americans assumed the war would end quickly.”

If it is especially important that you formulate a counterargument to this claim, then you might wish to quote the part of the statement that you find questionable and establish a dialogue between yourself and John Doe:

Historian John Doe has argued that in 1941 “almost all Americans assumed the war would end quickly” (Doe 223). Yet during the first six months of U.S. involvement, the wives and mothers of soldiers often noted in their diaries their fear that the war would drag on for years.

Giving added emphasis to a particularly authoritative source on your topic.

There will be times when you want to highlight the words of a particularly important and authoritative source on your topic. For example, suppose you were writing an essay about the differences between the lives of male and female slaves in the U.S. South. One of your most provocative sources is a narrative written by a former slave, Harriet Jacobs. It would then be appropriate to quote some of Jacobs’s words:

Harriet Jacobs, a former slave from North Carolina, published an autobiographical slave narrative in 1861. She exposed the hardships of both male and female slaves but ultimately concluded that “slavery is terrible for men; but it is far more terrible for women.”

In this particular example, Jacobs is providing a crucial first-hand perspective on slavery. Thus, her words deserve more exposure than a paraphrase could provide.

Jacobs is quoted in Harriet A. Jacobs, Incidents in the Life of a Slave Girl, ed. Jean Fagan Yellin (Cambridge: Harvard University Press, 1987).

Analyzing how others use language.

This scenario is probably most common in literature and linguistics courses, but you might also find yourself writing about the use of language in history and social science classes. If the use of language is your primary topic, then you will obviously need to quote users of that language.

Examples of topics that might require the frequent use of quotations include:

Southern colloquial expressions in William Faulkner’s Light in August

Ms. and the creation of a language of female empowerment

A comparison of three British poets and their use of rhyme

Spicing up your prose.

In order to lend variety to your prose, you may wish to quote a source with particularly vivid language. All quotations, however, must closely relate to your topic and arguments. Do not insert a quotation solely for its literary merits.

One example of a quotation that adds flair:

President Calvin Coolidge’s tendency to fall asleep became legendary. As H. L. Mencken commented in the American Mercury in 1933, “Nero fiddled, but Coolidge only snored.”

How do I set up and follow up a quotation?

Once you’ve carefully selected the quotations that you want to use, your next job is to weave those quotations into your text. The words that precede and follow a quotation are just as important as the quotation itself. You can think of each quote as the filling in a sandwich: it may be tasty on its own, but it’s messy to eat without some bread on either side of it. Your words can serve as the “bread” that helps readers digest each quote easily. Below are four guidelines for setting up and following up quotations.

In illustrating these four steps, we’ll use as our example, Franklin Roosevelt’s famous quotation, “The only thing we have to fear is fear itself.”

1. Provide context for each quotation.

Do not rely on quotations to tell your story for you. It is your responsibility to provide your reader with context for the quotation. The context should set the basic scene for when, possibly where, and under what circumstances the quotation was spoken or written. So, in providing context for our above example, you might write:

When Franklin Roosevelt gave his inaugural speech on March 4, 1933, he addressed a nation weakened and demoralized by economic depression.

2. Attribute each quotation to its source.

Tell your reader who is speaking. Here is a good test: try reading your text aloud. Could your reader determine without looking at your paper where your quotations begin? If not, you need to attribute the quote more noticeably.

Avoid getting into the “they said” attribution rut! There are many other ways to attribute quotes besides this construction. Here are a few alternative verbs, usually followed by “that”:

Different reporting verbs are preferred by different disciplines, so pay special attention to these in your disciplinary reading. If you’re unfamiliar with the meanings of any of these words or others you find in your reading, consult a dictionary before using them.

3. Explain the significance of the quotation.

Once you’ve inserted your quotation, along with its context and attribution, don’t stop! Your reader still needs your assessment of why the quotation holds significance for your paper. Using our Roosevelt example, if you were writing a paper on the first one-hundred days of FDR’s administration, you might follow the quotation by linking it to that topic:

With that message of hope and confidence, the new president set the stage for his next one-hundred days in office and helped restore the faith of the American people in their government.

4. Provide a citation for the quotation.

All quotations, just like all paraphrases, require a formal citation. For more details about particular citation formats, see the UNC Libraries citation tutorial . In general, you should remember one rule of thumb: Place the parenthetical reference or footnote/endnote number after—not within—the closed quotation mark.

Roosevelt declared, “The only thing we have to fear is fear itself” (Roosevelt, Public Papers, 11).

Roosevelt declared, “The only thing we have to fear is fear itself.”1

How do I embed a quotation into a sentence?

In general, avoid leaving quotes as sentences unto themselves. Even if you have provided some context for the quote, a quote standing alone can disrupt your flow.  Take a look at this example:

Hamlet denies Rosencrantz’s claim that thwarted ambition caused his depression. “I could be bounded in a nutshell and count myself a king of infinite space” (Hamlet 2.2).

Standing by itself, the quote’s connection to the preceding sentence is unclear. There are several ways to incorporate a quote more smoothly:

Lead into the quote with a colon.

Hamlet denies Rosencrantz’s claim that thwarted ambition caused his depression: “I could be bounded in a nutshell and count myself a king of infinite space” (Hamlet 2.2).

The colon announces that a quote will follow to provide evidence for the sentence’s claim.

Introduce or conclude the quote by attributing it to the speaker. If your attribution precedes the quote, you will need to use a comma after the verb.

Hamlet denies Rosencrantz’s claim that thwarted ambition caused his depression. He states, “I could be bounded in a nutshell and count myself a king of infinite space” (Hamlet 2.2).

When faced with a twelve-foot mountain troll, Ron gathers his courage, shouting, “Wingardium Leviosa!” (Rowling, p. 176).

The Pirate King sees an element of regality in their impoverished and dishonest life. “It is, it is a glorious thing/To be a pirate king,” he declares (Pirates of Penzance, 1983).

Interrupt the quote with an attribution to the speaker. Again, you will need to use a comma after the verb, as well as a comma leading into the attribution.

“There is nothing either good or bad,” Hamlet argues, “but thinking makes it so” (Hamlet 2.2).

“And death shall be no more,” Donne writes, “Death thou shalt die” (“Death, Be Not Proud,” l. 14).

Dividing the quote may highlight a particular nuance of the quote’s meaning. In the first example, the division calls attention to the two parts of Hamlet’s claim. The first phrase states that nothing is inherently good or bad; the second phrase suggests that our perspective causes things to become good or bad. In the second example, the isolation of “Death thou shalt die” at the end of the sentence draws a reader’s attention to that phrase in particular. As you decide whether or not you want to break up a quote, you should consider the shift in emphasis that the division might create.

Use the words of the quote grammatically within your own sentence.

When Hamlet tells Rosencrantz that he “could be bounded in a nutshell and count [him]self a king of infinite space” (Hamlet 2.2), he implies that thwarted ambition did not cause his depression.

Ultimately, death holds no power over Donne since in the afterlife, “death shall be no more” (“Death, Be Not Proud,” l. 14).

Note that when you use “that” after the verb that introduces the quote, you no longer need a comma.

The Pirate King argues that “it is, it is a glorious thing/to be a pirate king” (Pirates of Penzance, 1983).

How much should I quote?

As few words as possible. Remember, your paper should primarily contain your own words, so quote only the most pithy and memorable parts of sources. Here are guidelines for selecting quoted material judiciously:

Excerpt fragments.

Sometimes, you should quote short fragments, rather than whole sentences. Suppose you interviewed Jane Doe about her reaction to John F. Kennedy’s assassination. She commented:

“I couldn’t believe it. It was just unreal and so sad. It was just unbelievable. I had never experienced such denial. I don’t know why I felt so strongly. Perhaps it was because JFK was more to me than a president. He represented the hopes of young people everywhere.”

You could quote all of Jane’s comments, but her first three sentences are fairly redundant. You might instead want to quote Jane when she arrives at the ultimate reason for her strong emotions:

Jane Doe grappled with grief and disbelief. She had viewed JFK, not just as a national figurehead, but as someone who “represented the hopes of young people everywhere.”

Excerpt those fragments carefully!

Quoting the words of others carries a big responsibility. Misquoting misrepresents the ideas of others. Here’s a classic example of a misquote:

John Adams has often been quoted as having said: “This would be the best of all possible worlds if there were no religion in it.”

John Adams did, in fact, write the above words. But if you see those words in context, the meaning changes entirely. Here’s the rest of the quotation:

Twenty times, in the course of my late reading, have I been on the point of breaking out, ‘this would be the best of all possible worlds, if there were no religion in it!!!!’ But in this exclamation, I should have been as fanatical as Bryant or Cleverly. Without religion, this world would be something not fit to be mentioned in public company—I mean hell.

As you can see from this example, context matters!

This example is from Paul F. Boller, Jr. and John George, They Never Said It: A Book of Fake Quotes, Misquotes, and Misleading Attributions (Oxford University Press, 1989).

Use block quotations sparingly.

There may be times when you need to quote long passages. However, you should use block quotations only when you fear that omitting any words will destroy the integrity of the passage. If that passage exceeds four lines (some sources say five), then set it off as a block quotation.

Be sure you are handling block quotes correctly in papers for different academic disciplines–check the index of the citation style guide you are using. Here are a few general tips for setting off your block quotations:

• Set up a block quotation with your own words followed by a colon.
• Indent. You normally indent 4-5 spaces for the start of a paragraph. When setting up a block quotation, indent the entire paragraph once from the left-hand margin.
• Single space or double space within the block quotation, depending on the style guidelines of your discipline (MLA, CSE, APA, Chicago, etc.).
• Do not use quotation marks at the beginning or end of the block quote—the indentation is what indicates that it’s a quote.
• Place parenthetical citation according to your style guide (usually after the period following the last sentence of the quote).
• Follow up a block quotation with your own words.

So, using the above example from John Adams, here’s how you might include a block quotation:

After reading several doctrinally rigid tracts, John Adams recalled the zealous ranting of his former teacher, Joseph Cleverly, and minister, Lemuel Bryant. He expressed his ambivalence toward religion in an 1817 letter to Thomas Jefferson:

Adams clearly appreciated religion, even if he often questioned its promotion.

How do I combine quotation marks with other punctuation marks?

It can be confusing when you start combining quotation marks with other punctuation marks. You should consult a style manual for complicated situations, but the following two rules apply to most cases:

Keep periods and commas within quotation marks.

So, for example:

According to Professor Poe, werewolves “represent anxiety about the separation between human and animal,” and werewolf movies often “interrogate those boundaries.”

In the above example, both the comma and period were enclosed in the quotation marks. The main exception to this rule involves the use of internal citations, which always precede the last period of the sentence. For example:

According to Professor Poe, werewolves “represent anxiety about the separation between human and animal,” and werewolf movies often “interrogate those boundaries” (Poe 167).

Note, however, that the period remains inside the quotation marks when your citation style involves superscript footnotes or endnotes. For example:

According to Professor Poe, werewolves “represent anxiety about the separation between human and animal,” and werewolf movies often “interrogate those boundaries.” 2

Place all other punctuation marks (colons, semicolons, exclamation marks, question marks) outside the quotation marks, except when they were part of the original quotation.

Take a look at the following examples:

I couldn’t believe it when my friend passed me a note in the cafe saying the management “started charging $15 per hour for parking”!

The coach yelled, “Run!”

In the first example, the author placed the exclamation point outside the quotation mark because she added it herself to emphasize the outrageous nature of the parking price change. The original note had not included an exclamation mark. In the second example, the exclamation mark remains within the quotation mark because it is indicating the excited tone in which the coach yelled the command. Thus, the exclamation mark is considered to be part of the original quotation.

How do I indicate quotations within quotations?

If you are quoting a passage that contains a quotation, then you use single quotation marks for the internal quotation. Quite rarely, you quote a passage that has a quotation within a quotation. In that rare instance, you would use double quotation marks for the second internal quotation.

Here’s an example of a quotation within a quotation:

In “The Emperor’s New Clothes,” Hans Christian Andersen wrote, “‘But the Emperor has nothing on at all!’ cried a little child.”

Remember to consult your style guide to determine how to properly cite a quote within a quote.

When do I use those three dots ( . . . )?

Whenever you want to leave out material from within a quotation, you need to use an ellipsis, which is a series of three periods, each of which should be preceded and followed by a space. So, an ellipsis in this sentence would look like . . . this. There are a few rules to follow when using ellipses:

Be sure that you don’t fundamentally change the meaning of the quotation by omitting material.

Take a look at the following example:

“The Writing Center is located on the UNC campus and serves the entire UNC community.”

“The Writing Center . . . serves the entire UNC community.”

The reader’s understanding of the Writing Center’s mission to serve the UNC community is not affected by omitting the information about its location.

Do not use ellipses at the beginning or ending of quotations, unless it’s important for the reader to know that the quotation was truncated.

For example, using the above example, you would NOT need an ellipsis in either of these situations:

“The Writing Center is located on the UNC campus . . .”

The Writing Center ” . . . serves the entire UNC community.”

Use punctuation marks in combination with ellipses when removing material from the end of sentences or clauses.

For example, if you take material from the end of a sentence, keep the period in as usual.

“The boys ran to school, forgetting their lunches and books. Even though they were out of breath, they made it on time.”

“The boys ran to school. . . . Even though they were out of breath, they made it on time.”

Likewise, if you excerpt material at the end of clause that ends in a comma, retain the comma.

“The red car came to a screeching halt that was heard by nearby pedestrians, but no one was hurt.”

“The red car came to a screeching halt . . . , but no one was hurt.”

Is it ever okay to insert my own words or change words in a quotation?

Sometimes it is necessary for clarity and flow to alter a word or words within a quotation. You should make such changes rarely. In order to alert your reader to the changes you’ve made, you should always bracket the altered words. Here are a few examples of situations when you might need brackets:

Changing verb tense or pronouns in order to be consistent with the rest of the sentence.

Suppose you were quoting a woman who, when asked about her experiences immigrating to the United States, commented “nobody understood me.” You might write:

Esther Hansen felt that when she came to the United States “nobody understood [her].”

In the above example, you’ve changed “me” to “her” in order to keep the entire passage in third person. However, you could avoid the need for this change by simply rephrasing:

“Nobody understood me,” recalled Danish immigrant Esther Hansen.

Including supplemental information that your reader needs in order to understand the quotation.

For example, if you were quoting someone’s nickname, you might want to let your reader know the full name of that person in brackets.

“The principal of the school told Billy [William Smith] that his contract would be terminated.”

Similarly, if a quotation referenced an event with which the reader might be unfamiliar, you could identify that event in brackets.

“We completely revised our political strategies after the strike [of 1934].”

Indicating the use of nonstandard grammar or spelling.

In rare situations, you may quote from a text that has nonstandard grammar, spelling, or word choice. In such cases, you may want to insert [sic], which means “thus” or “so” in Latin. Using [sic] alerts your reader to the fact that this nonstandard language is not the result of a typo on your part. Always italicize “sic” and enclose it in brackets. There is no need to put a period at the end. Here’s an example of when you might use [sic]:

Twelve-year-old Betsy Smith wrote in her diary, “Father is afraid that he will be guilty of beach [sic] of contract.”

Here [sic] indicates that the original author wrote “beach of contract,” not breach of contract, which is the accepted terminology.

Do not overuse brackets!

For example, it is not necessary to bracket capitalization changes that you make at the beginning of sentences. For example, suppose you were going to use part of this quotation:

“The colors scintillated curiously over a hard carapace, and the beetle’s tiny antennae made gentle waving motions as though saying hello.”

If you wanted to begin a sentence with an excerpt from the middle of this quotation, there would be no need to bracket your capitalization changes.

“The beetle’s tiny antennae made gentle waving motions as though saying hello,” said Dr. Grace Farley, remembering a defining moment on her journey to becoming an entomologist.

Not: “[T]he beetle’s tiny antennae made gentle waving motions as though saying hello,” said Dr. Grace Farley, remembering a defining moment on her journey to becoming an entomologist.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Barzun, Jacques, and Henry F. Graff. 2012. The Modern Researcher , 6th ed. Belmont, CA: Wadsworth Cengage Learning.

Booth, Wayne C., Gregory G. Colomb, Joseph M. Williams, Joseph Bizup, and William T. FitzGerald. 2016. The Craft of Research , 4th ed. Chicago: University of Chicago Press.

Gibaldi, Joseph. 2009. MLA Handbook for Writers of Research Papers , 7th ed. New York: The Modern Language Association of America.

Turabian, Kate. 2018. A Manual for Writers of Term Papers, Theses, Dissertations , 9th ed. Chicago: University of Chicago Press.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Encyclopedia

Writing with artificial intelligence, quotation – when & how to use quotes in your writing.

• © 2024 by Joseph M. Moxley - Professor of English - USF

What is a Quotation?

A quotation refers to the precise replication of words or phrases from another source, embedded within one’s own writing or speech. To distinguish these directly borrowed elements from original content, writers use quotation marks. Additionally, they provide citations or footnotes to trace back to the original source, maintaining the integrity of the content.

Related Concepts: Copyright ; Information Has Value ; Inserting or Altering Words in a Direct Quotation ; Intellectual Property ; Omitting Words from a Direct Quotation ; Plagiarism ; Scholarship as a Conversation

Why Does Quotation Matter?

When writers incorporate quotations, they aren’t merely borrowing words. They’re strategically weaving the collective wisdom of past thinkers into their narrative, bolstering their arguments, and enhancing their credibility .

• Recognition of Scholarly Foundations: Quotations enable writers to highlight and pay respect to the foundational works, insights, and contributions of past scholars, researchers, and theorists. By doing so, they acknowledge the deep roots of knowledge and ideas that have paved the way for present-day discussions and discoveries.
• Authentic Representation in Discourse: Quotations preserve the precise wording of an author, grounding the reader directly in the original discourse. Unlike paraphrases or summaries , which reinterpret or condense an author’s message, quotations maintain the unaltered essence, subtleties, and nuances of the original statement.
• Validation: Quotations may function as compelling evidence , fortifying the claims a writer has made in their argument
• Building upon Established Knowledge: Quotations illuminate existing ideas, paving the way for writers to elaborate on, challenge, or pivot them toward new directions.
• Preservation of Nuance: Quotations capture the intricate subtleties of unique expressions and poetic language, ensuring that their inherent meaning remains unaltered.
• Positioning within a Discourse: Through quotations, writers can align or differentiate themselves within specific intellectual landscapes, debates, or traditions.
• Credibility: Meticulous citation and thoughtful quotation are hallmarks of a diligent writer, revealing their commitment to professional and ethical codes of conduct.

What Do Writers Quote in Academic and Professional Writing

In both academic and professional writing , quotation serves multiple functions:

• Authenticity and Credibility : Quoting directly from a source provides evidence that the information is based on established research or authoritative accounts . It adds weight to arguments, showcasing that they aren’t merely opinions but are backed by recognized studies or experts in the field.
• Respect for Copyright & Intellectual Property : Academic and workplace writers, trained in critical literacy skills , follow citation conventions meticulously. This diligence stems from their respect for copyright laws and the broader principles of intellectual property . Properly citing and quoting indicates an acknowledgment of the original creator’s contribution and ensures that their work is not appropriated without due credit.
• Preserving Original Meaning: Paraphrasing or summarizing can sometimes inadvertently alter the original meaning or nuance of a text. Quoting ensures that the exact words and context provided by the original author are retained.
• Engaging the Reader: Quotations can be used strategically to capture the reader’s attention. A well-chosen quote can make an article or essay more engaging, invoking curiosity or emphasizing a point.
• Paying Homage: Quoting acknowledges the original creators of content. It’s a form of respect, indicating that their words have made an impact and are deemed worthy of repetition and recognition.
• Avoiding Plagiarism : In academic and professional contexts, using someone else’s words or ideas without proper citation is considered unethical and can have serious repercussions. Quoting, accompanied by appropriate citation, ensures that credit is given where it’s due.
• Enriching Content: Quotations can introduce diverse voices and perspectives into a piece of writing. They can be used to support or counter arguments, provide alternative viewpoints, or illustrate a point more vividly.
• Encouraging Deeper Engagement: When readers encounter a quotation, especially one from a recognized authority or a profound piece of literature, it prompts them to reflect on its meaning, perhaps encouraging them to seek out the original source and engage more deeply with the topic .
• Clarifying Complex Ideas: At times, original texts may communicate complex ideas in a way that’s particularly clear or compelling. Quoting such passages can assist the writer in conveying these complexities without the risk of oversimplification.

When Should You Use Quotations in Your Writing?

There are five major reasons for using quotations:

• Evidential Support: To back up claims or arguments with concrete evidence .
• Illustrative Purposes: To give specific examples or to illuminate a point .
• Eloquence and Impact: Sometimes, the original phrasing is so poignant or well-expressed that paraphrasing might dilute its power or clarity.
• Appeal to Authority: Quoting renowned figures or experts can bolster the credibility of an argument .
• Attribution : To give credit to the original source or author and avoid plagiarism .

When Should I Quote as Opposed to Paraphrasing or Summarizing?

Quoting, paraphrasing , and summarizing are all essential techniques in writing , allowing writers to incorporate the ideas of others into their work.

In general, however, because readers do not want to read miscellaneous quotations that are thrown together one after another, you are generally better off paraphrasing and summarizing material and using direct quotations sparingly. Students—from middle school, college, through graduate school—sometimes believe loads of quotations bring a great deal of credibility , ethos , to the text . Yet, if too many quotes are provided, the text loses clarity .

Like everything else in life, balance is the key. The problem with texts that use extensive direct quotations is that they tend to take attention away from the writer’s voice , purpose , thesis . If you offer quotations every few lines, your ideas become subordinate to other people’s ideas and voices, which often contradicts your instructor’s reasons for assigning research papers—that is, to learn what you think about a subject.

Below are some general strategies you might consider when determine it’s best to quote, paraphrase, or summarize:

• Heart of the Argument: When a passage directly encapsulates the essence of the discussion, quoting ensures the original message isn’t diluted.
• Eloquence & Precision: Some texts are so beautifully articulated or precisely worded that rephrasing would diminish their impact or clarity .
• Eyewitness Accounts: Dramatic firsthand accounts of events can lose their emotional potency if not presented verbatim.
• Influential Authorities: Quoting recognized experts or influential figures can lend credibility to an argument .
• Pertinent Data: Specific statistics or data points, when exactness is crucial, should be quoted directly.
• Challenging to Rephrase: Some complex ideas or specialized terminologies can be hard to rephrase without altering the original meaning.

Paraphrasing

• Clarification: When the original text is dense or hard to understand, a paraphrase can clarify the message for the reader.
• Integration: To weave source material more seamlessly into one’s writing, a paraphrase can be more fluid than a direct quote.
• Modification: If a writer wishes to emphasize a particular aspect of the source material or adapt it for a different audience , paraphrasing allows for this flexibility.

Summarizing

• Overview: Summaries are excellent for providing readers with a snapshot of a larger work or body of research.
• Brevity: When the main gist of a longer text is relevant, but details aren’t necessary, summarizing captures the essence in fewer words.

In all cases, whether quoting, paraphrasing, or summarizing, proper attribution is vital to respect the original author’s intellectual property and to provide readers with a clear path to the primary source.

Is It Okay to Edit Quotations for Brevity and Clarity ?

Yes, editing quotations for clarity and brevity is often necessary, especially when you want to emphasize your own voice and perspective in your writing . Utilizing direct quotations from reliable sources enhances your credibility , but extensive quotations can overshadow your voice and detract from your main argument . Responsible writers prioritize both the quality and the quantity of their quotations, selecting only the most pertinent words or phrases to articulate their points effectively.

How Can I Effectively Shorten a Quote?

• Opt for integrating the part of a quotation that is most impactful, concise, and uniquely expressive.
• Extract only the key segments of the quote that align with your argument , employing ellipses where you omit sections.
• Aim for quotations that span no more than two lines.
• Adhere to the 10% rule: quotations shouldn’t exceed 10% of your paper’s total word count.
• Always respect guidelines given by instructors or publishers regarding quotation length.

Example: Trimming a Quote for Brevity

Original quote:.

“Hand-washing is especially important for children in child care settings. Young children cared for in groups outside the home are at greater risk of respiratory and gastrointestinal diseases, which can easily spread to family members and other contacts. Be sure your child care provider promotes frequent hand-washing or use of alcohol-based hand sanitizers. Ask whether the children are required to wash their hands several times a day — not just before meals.” (“Hand-washing: Do’s and Don’ts” 2)

Revised Quote with Context :

Parents should be concerned about their child’s hand-washing habits—not only under supervision at home, but when the child is being cared for by others. Experts from the Mayo Clinic staff advise that “[h]and-washing is especially important for children in child care settings. . . . Be sure your child care provider promotes frequent hand-washing” (“Hand-washing: Do’s and Don’ts” 2).

What is the Purpose of Ellipses in Quotations?

Ellipses, represented by three dots ( . . . ), indicate that a portion of the original text has been removed for brevity , relevance, or clarity.

How Should Ellipses Be Formatted Within a Quotation?

• Spacing : There should be a space before, between, and after each of the dots. Example :“Original thought . . . remains crucial.”

When Is It Appropriate to Use Ellipses in a Quotation?

• To remove non-essential information that doesn’t alter the quote’s original meaning.
• To make the quotation fit seamlessly into the writer’s sentence or argument.

Are There Any Cautions to Consider When Using Ellipses?

• Avoid altering the original intent or meaning of the quotation.
• Refrain from overusing ellipses; excessive omissions can make the quote unclear or misleading.
• Do not start or end a quotation with ellipses, unless it’s essential to convey that the quote is part of a larger context.

How Do I Use Ellipses After a Complete Sentence?

If you’re omitting content following a complete sentence, the ellipsis points should come after the sentence’s ending punctuation.

Correct : “He enjoyed the evening. . . . They discussed various topics.”

Incorrect : “He enjoyed the evening. . . They discussed various topics.”

Remember, while ellipses help in streamlining quotations, they should be used judiciously to ensure the integrity of the original text remains intact.

Can I Make Changes to Quotations? If So, How to Do I Alert My Readers to Those Changes?

• Purpose of Brackets in Quotations : Brackets [ ] are used to insert or alter words in a direct quotation for clarity, explanation, or integration.
• Example: “It [driving] imposes a heavy procedural workload on cognition…”
• Reminder: The word ‘driving’ clarifies the pronoun ‘it’.
• Example: “[D]riving imposes a heavy procedural workload [visual and motor demands] on cognition…”
• Point: Brackets offer deeper insights on the “procedural workload”.
• Example: Salvucci and Taatgen propose that “[t]he heavy cognitive workload of driving suggests…”
• Note: The change from uppercase ‘T’ to lowercase ‘t’ is indicated with brackets.
• Example: “Drivers [are] increasingly engaging in secondary tasks while driving.”
• Note: The verb changes from past to present tense, and this change is enclosed in brackets.
• Incorrect: “It (driving) imposes a heavy procedural workload…”
• Correct: “It [driving] imposes a heavy procedural workload…”
• A Key Caution : Don’t misuse brackets to alter the original text’s intent or meaning. Always represent the author’s intent accurately.
• Do use brackets to enclose inserted words for clarity or brief explanation.
• Do use brackets to indicate changes in letter case or verb tense.
• Don’t use parentheses in these scenarios.
• Never use bracketed material to twist the author’s original meaning.

Remember, the aim is to ensure clarity and respect the original author’s intent while making the quotation fit seamlessly into your writing.

For More Information on Shortening Quotations, See Also:

• Inserting or Altering Words in a Direct Quotation
• Omitting Words from a Direct Quotation (MLA)
• Omitting Words from a Direct Quotation (APA)

Mayo Clinic Staff. (2021, December 10). Hand-washing: Do’s and don’ts. Mayo Clinic .

Related Articles:

Block quotations, recommended.

Academic Writing – How to Write for the Academic Community

Structured Revision – How to Revise Your Work

Professional Writing – How to Write for the Professional World

Credibility & Authority – How to Be Credible & Authoritative in Research, Speech & Writing

Citation Guide – Learn How to Cite Sources in Academic and Professional Writing

Page Design – How to Design Messages for Maximum Impact

Suggested edits.

• Please select the purpose of your message. * - Corrections, Typos, or Edits Technical Support/Problems using the site Advertising with Writing Commons Copyright Issues I am contacting you about something else
• Your full name
• Your email address *
• Page URL needing edits *
• Comments This field is for validation purposes and should be left unchanged.
• Jennifer Janechek

Featured Articles

• Library Catalogue

Quoting: When and how to use quotations

On this page, when should you quote, quoting basics, framing your quotations.

Quoting is an important technique used to include information from outside sources in academic writing. When using quotations, it is important that you also cite the original reference that you  have taken the quotation from, as your citations provide your reader with a map of the research that you have done. Making effective use of quotations in your writing requires you to carefully assess the value of including someone else’s own words in the advancement of your own argument.

According to Jerry Plotnick (2002, Director of the University College Writing Workshop) using a quotation is appropriate in the following situations:

1.       The language of the passage is particularly elegant, powerful, or memorable.

2.       You wish to confirm the credibility of your argument by enlisting the support of an authority on your topic.

3.       The passage is worthy of further analysis. 

4.       You wish to argue with someone else’s position in considerable detail. [1]

Research that involves participants (for example, interviews and participant-observation research) also often makes extensive use of quotations in order to foreground the unique voices and perspectives of the participants.

When you quote, you include the words and ideas of others in your text exactly as they have expressed them. You signal this inclusion by placing quotation marks (“ ”) around the source author’s words and providing an in-text citation after the quotation. Direct quotations differ from other in-text citations because they require that you include the page number on which the words can be found in the source text.  For example:

According to scholars of rhetoric Graff and Birkenstein (2014), when you are inserting a quotation in your writing “you need to insert it into what we like to call a ‘quotation sandwich,’ with the statement introducing it serving as the top slice of bread and the explanation following it serving as the bottom slice” (p. 46). [2] This "sandwich" method ensures that your reader can clearly see the source you are referencing and also understands how this quotation supports your overall argument.

When you are quoting from a source that does not have page numbers (such as a website), you will consult your style guide to determine how best to reference your source. For example, both MLA and APA suggest listing the paragraph number or relevant heading.

You quote materials from a source text to support the arguments and ideas you are presenting in your own essay. Therefore, you must introduce the quotation and explain to your reader why you have included it and how it relates to, and helps to build, your argument. This is known as framing. It directs your reader’s attention to the specific elements of the quotation that are most directly relevant to your own arguments and ideas.

Here is an example of a quotation that is successfully “framed” within a text:

Citing the islands of Fiji as a case in point, Bordo notes that “until television was introduced in 1995, the islands had no reported cases of eating disorders. In 1998, three years after programs from the United States and Britain began broadcasting there, 62 percent of the girls surveyed reported dieting” (149-50). Bordo’s point is that the Western cult of dieting is spreading even to remote places across the globe. [3]

Remember that quoting is only one way of bringing someone else’s work into your own discussion. See the SLC handouts “Techniques for paraphrasing” and “Summarizing” for ideas on other ways to incorporate sources into your writing.

[1] http://www.writing.utoronto.ca/images/stories/Documents/quotations.pdf

[2] APA formatting

[3] Example taken from Graff, G. & Birkenstein, C. (2014). They say/I say: The moves that matter in academic writing. New York and London: W.W. Norton & Company.

The Sheridan Libraries

• Avoiding Plagiarism
• Sheridan Libraries
• What is Plagiarism?
• School Plagiarism Policies
• Common Knowledge
• Paraphrasing & Summarizing
• Minimizing Your Plagiarism Risk
• Student Help
• Helping Prevent Plagiarism in Your Classroom
• Avoiding Plagiarism Course
• Course FAQs

Quoting is when you use someone else’s exact words in your paper. It requires that quotation marks go around that author’s words, and the quotation is followed by an in-text citation.

Good Reasons to Quote

• A quote exactly reinforces a point I want to make, and I want to emphasize the authority of the expert with her or his own voice.
• The language is unique or unusual. If I rewrote it in my own words, it would lose this quality.

How Does Quoting Work?

• Key Rules of Quoting
• Sample Quotation (APA Style)
• Step-by-Step Quoting

• The exact words of the author are in quotation marks
• The quote is introduced so the reader is alerted that these are not the words of the student
• The quote is properly cited in the text and the reference list

Explore the other tabs to see a sample quote and learn the steps of recording a quote properly. 

Author’s original text

Business communication is increasingly taking place internationally – in all countries, among all peoples, and across all cultures. An awareness of other cultures – of their languages, customs, experiences and perceptions – as well as an awareness of the way in which other people conduct their business, are now essential ingredients of business communication. 

Example quotation that could be added to a paper

 As business communication spans the globe, “an awareness of other cultures – of their languages, customs, experiences and perceptions – as well as an awareness of the way in which other people conduct their business, are now essential ingredients of business communication” (Chase, O’Rourke & Wallace, 2003, p.59). 

• Find a portion of a book, journal, or website that you would like to use in your paper. Copy the words you plan to use.
• Put quotation marks at the beginning and end of the copied text.
• Add an in-text citation at the end of the quoted text (outside the quotation mark).
• Write (in your own words) to give context or introduce the quoted text.
• Add the sentence with your own words, the quote, and the in-text citation to your paper.
• Add the full citation to your reference list at the end of your paper.

How Much to Quote?

No matter what the source or style, you need to cite it both in-text and at the end of the paper with a full citation! Write down or record all the needed pieces of information when researching to ensure you avoid plagiarism.

 Lester, J.D. (1976). Writing Research Papers (2nd ed.). Glenview, IL: Scott Foresman. 

Cheat Sheet

• Quoting Download this helpful cheat sheet covering "Quoting."
• << Previous: Citing
• Next: Paraphrasing & Summarizing >>
• Last Updated: Aug 7, 2023 2:00 PM
• URL: https://guides.library.jhu.edu/avoidingplagiarism

How to Write a Research Paper

• Formulate Questions/Thesis
• Identify Keywords
• Find Background Info
• Search Strategies
• Dissertations
• Proceedings
• Statistics This link opens in a new window
• Primary | Secondary
• Scholarly | General This link opens in a new window
• Creative Commons
• Cite This link opens in a new window

Quote, Paraphrase, Summarize

Cut and paste.

How to Paraphrase

A Plagiarism Carol

There are three ways to properly use another author's words or ideas:

• Paraphrase;

Use quotes when you wish to retain the exact wording of the author .    Quotes should be used sparingly, and shouldn't come from only one information source.   You should also strive to maintain the author's intent--using ellipticals to remove pieces of the quotation that you disagree with is unethical. 

Quotes are best used:

when you can't paraphrase or summarize without changing the author's intent;

to add credibility to your assertion;

when the author's words are historically memorable, unique, or remarkable.

Quotes must be word for word, enclosed in between " ", and must be credited to the original author. 

Paraphrasing involves taking the source material and putting it into your own words.   The paraphrased portion should be about the same length as the original, and should maintain the original source's meaning, as well as all of the details.  Be careful when paraphrasing--changing just a few words or changing the sentence structure slightly is not paraphrasing, it is plagiarizing. 

Good paraphrasers will read the source material, pull out the main points, and using their own words (without adding personal opinions or ideas)  convey these main points to the reader.   Paraphrased information must also include an attribution to the source of your information.  Paraphrasing is best used:

to add clarity to an author's words or ideas if technical language is used

to simplify

to change the organization emphasis (Leibensperger, Summer.  " Decide When to Quote, Paraphrase, Summarize ."  University of Houston-Victoria.  

Sum m arize

Summarizing condenses the original piece of information, in your own words .   When should you summarize?  Summarize the information you're using when details are less important, and when you want to present an overview of the information.  Good summarizers will read the text, pull out the most important pieces of information, and using their own words, will present these pieces of information to the reader.  Summarizing is best used:

To condense;

To omit extraneous information;

To simplify.  (Leibensperger, Summer.  " Decide When to Quote, Paraphrase, Summarize ."  University of Houston-Victoria.  

Still unsure?   Decide When to Quote, Paraphrase, Summarize can help.

Original Text

The automotive industry has not shown good judgment in designing automotive features that distract drivers. A classic example is the use of a touch-sensitive screen to replace al the controls for radios, tape/CD players, and heating/cooling. Although an interesting technology, such devices require that the driver take his eyes off the road. - Tom Magliozzi and Ray Magliozzi, Letter to a Massachusetts state senator, p.3

Unacceptable Borrowing

Radio show hosts Tom and Ray Magliozzi argue that the automotive industry has not demonstrated good judgment in devising car features that distract drivers. One feature is a touch-sensitive screen that replaced controls for radios, tape/CD players, and heating/cooling. Although the technology is interesting, such devices require that a driver look away from the road (3).

Acceptable Paraphrase

Radio show hosts Tom and Ray Magliozzi claim that motor vehicle manufacturers do not always design features with safety in mind. For example, when designers replaced radio, CD player, and temperature control knobs with touch-sensitive panels, they were forgetting one thing: To use the panels, drivers would need to take their eyes off the road (3).

Source: Hacker, Diana. Rules for Writers . 5th ed. Boston: Beford/St. Martin’s, 2004.

Common Knowledge?

Common knowledge, or "what everybody knows", is the only thing that does not need to be cited.

How does one know, however, "what everybody knows"?  

In one field, a fact that is considered "common knowledge" to someone within that field, will not be considered common knowledge to someone outside of the field.

Generally, for a fact to be considered common knowledge, it has to meet two criteria:

• It must have been published in at least three independent sources; and
• It must be known by a wide variety of people.

Ideally, it should meet a third criteria--that is, the fact may be found in general reference sources--general encyclopedias or almanacs.

Controversial?

With controversial issues, common knowledge is factual and must involve agreement among most people .  "It is NOT common knowledge that drilling will affect caribou migration or feeding habits."  While evidence may exist to support this statement, there is not enough agreement to make it "common knowledge." 

" Common Knowledge ."  MIT.  Accessed 1 July 2020.

• << Previous: Take Notes
• Next: Get Help >>
• Last Updated: Jul 1, 2024 10:27 AM
• URL: https://libguides.lvc.edu/researchpaper

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

How to Use Quotation Marks

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Using Quotation Marks

The primary function of quotation marks is to set off and represent exact language (either spoken or written) that has come from somebody else. The quotation mark is also used to designate speech acts in fiction and sometimes poetry. Since you will most often use them when working with outside sources, successful use of quotation marks is a practical defense against accidental plagiarism and an excellent practice in academic honesty. The following rules of quotation mark use are the standard in the United States, although it may be of interest that usage rules for this punctuation do vary in other countries.

The following covers the basic use of quotation marks. For details and exceptions consult the separate sections of this guide.

Direct Quotations

Direct quotations involve incorporating another person's exact words into your own writing.

• Quotation marks always come in pairs. Do not open a quotation and fail to close it at the end of the quoted material.

Mr. Johnson, who was working in his field that morning, said, "The alien spaceship appeared right before my own two eyes."

Although Mr. Johnson has seen odd happenings on the farm, he stated that the spaceship "certainly takes the cake" when it comes to unexplainable activity.

"I didn't see an actual alien being," Mr. Johnson said, "but I sure wish I had."

When quoting text with a spelling or grammar error, you should transcribe the error exactly in your own text. However, also insert the term sic in italics directly after the mistake, and enclose it in brackets. Sic is from the Latin, and translates to "thus," "so," or "just as that." The word tells the reader that your quote is an exact reproduction of what you found, and the error is not your own.

Mr. Johnson says of the experience, "It's made me reconsider the existence of extraterestials [ sic ]."

• Quotations are most effective if you use them sparingly and keep them relatively short. Too many quotations in a research paper will get you accused of not producing original thought or material (they may also bore a reader who wants to know primarily what YOU have to say on the subject).

Indirect Quotations

Indirect quotations are not exact wordings but rather rephrasings or summaries of another person's words. In this case, it is not necessary to use quotation marks. However, indirect quotations still require proper citations, and you will be committing plagiarism if you fail to do so.

Many writers struggle with when to use direct quotations versus indirect quotations. Use the following tips to guide you in your choice.

Use direct quotations when the source material uses language that is particularly striking or notable. Do not rob such language of its power by altering it.

The above should never stand in for:

Use an indirect quotation (or paraphrase) when you merely need to summarize key incidents or details of the text.

Use direct quotations when the author you are quoting has coined a term unique to her or his research and relevant within your own paper.

When to use direct quotes versus indirect quotes is ultimately a choice you'll learn a feeling for with experience. However, always try to have a sense for why you've chosen your quote. In other words, never put quotes in your paper simply because your teacher says, "You must use quotes."

• How it works

How to Quote Sources – Comprehensive Guide With Examples

Published by Olive Robin at October 17th, 2023 , Revised On October 17, 2023

In academia, research, journalism, and writing, the skill of quoting sources is fundamental. Accurate and proper quoting adds credibility to your work and demonstrates respect for the original authors and their ideas. Whether you’re working on a research paper , an essay , or any other form of written communication, understanding how to quote sources is crucial. This comprehensive guide will take you through the ins and outs of quoting, with examples and tips to help you become proficient in citation.

Understanding the Basics of Quoting

Proficiency in the fundamentals of quoting is integral to scholarly writing . This proficiency encompasses the ability to distinguish between primary and secondary sources and the skill of sourcing quotations.

Primary Source Vs. Secondary Source

Before discussing our journey of quoting sources, it’s crucial to distinguish between primary and secondary sources.

Primary Source 

A primary source is direct, firsthand information or an original work. Examples include original research papers, letters, diaries, speeches, and interviews.

Secondary Source 

On the other hand, a secondary source interprets, analyses, or summarises primary sources. It provides commentary or analysis based on primary sources. Examples include books, articles, documentaries, or reviews.

In most cases, it’s preferable to quote from primary sources as they offer the most direct and credible information.

How to Find a Quote Source

Finding the right source to quote is the first step in the quoting process. Here are some tips on how to locate suitable sources:

Online Databases and Libraries

Utilise online databases and library resources like PubMed, JSTOR, Google Scholar, and your university library’s website. These platforms provide access to a vast collection of scholarly materials.

Credible Websites

When searching online, focus on credible websites, such as government agencies, academic institutions, and well-established news outlets. Check for the author’s credentials and the publication date to ensure reliability.

Books and Journals

Physical and digital books and academic journals are excellent sources for quotes. Libraries and digital libraries like Project Gutenberg and the Library of Congress offer extensive collections.

Interviews and Personal Communications

If quoting from an interview or personal communication, ensure you have proper consent from the source. Use these quotes sparingly and only when they add unique value to your work.

How to Quote Sources in a Research Paper

Now that we have laid the foundation, let us explore the specifics of quoting within a research paper.

Inline Quotations

Inline quotations are short snippets of text integrated into your writing. 

Here’s how to format them correctly:

• Use Quotation Marks: Enclose the quoted text in double quotation marks.
• Include Page Numbers: If available, add the page number in parentheses after the quotation.
• Credit the Source: Mention the author’s name and the publication date within or after the quotation.

According to Smith (2020), “Quoting sources properly enhances the credibility of your research” (p. 45).

Block Quoting

When a quote exceeds 40 words or more, it should be formatted as a block quote.  

Follow these guidelines:

• Indentation: Indent the entire quote from the left margin, typically by 0.5 inches.
• Omit Quotation Marks: Block quotes do not require double quotation marks.
• Maintain Spacing: Keep the spacing consistent with the original text.
• Cite Source: Include the author’s name and publication date either before or after the block quote .

Example: Markdown

Smith (2020) highlighted the importance of proper quoting:

    Quoting sources properly enhances the credibility of your research. It shows that you have conducted thorough research and are building upon established knowledge. (p. 45)

Verifying Quotes

In quotes, especially when dealing with secondary sources that include quotes, it’s wise to verify the accuracy of the quoted material. Take the extra step to go back to the original source to ensure that the quote is complete, accurate, and not taken out of context. This diligence is essential for maintaining the integrity of your work.

Using Ellipses and Square Brackets

Quoting often involves adapting source material to fit within your narrative. When omitting words or phrases from a quote, use ellipses (…) to indicate the omission. When adding clarifications or explanations within a quote, enclose them in square brackets [].

These tools allow you to maintain the integrity of the original quote while ensuring it fits smoothly into your text.

Quoting a Source in An Essay

Quoting within an essay follows similar principles to research papers, with minor differences.

Signal Phrases

Signal phrases are used to introduce quotes in your essay. They provide context and indicate that you are incorporating someone else’s ideas. Examples of signal phrases include:

• According to…
• Smith argues that…
• In the words of…

Using signal phrases helps smoothly integrate quotes into your essay’s narrative.

Paraphrasing

While quoting is a valuable skill, it’s worth noting that paraphrasing—expressing someone else’s ideas in your own words—is another essential technique in writing. Paraphrasing allows you to integrate source material smoothly into your text while giving proper credit. When quoting is not necessary, consider paraphrasing as a viable alternative.

How to Cite a Quote: Harvard Style

Citing quotes correctly is crucial to avoiding plagiarism and giving credit to the original source. The Harvard referencing style is one commonly used for citing sources. Here’s how to cite a quote in Harvard style:

In-Text Citation

In-text citations should include the author’s last name, the publication year, and the page number (if applicable) within parentheses. Place this citation immediately after the quote or paraphrased content.

Example: (Smith, 2020, p. 45)

Reference List

In your reference list or bibliography, provide a full citation for each source you’ve quoted or referenced. The Harvard format typically includes the author’s name, publication year, title of the work, publisher, and other relevant information.

Example: scss

Smith, J. (2020). The Art of Quoting. Academic Press.

The research done by our experts have:

• Precision and Clarity
• Zero Plagiarism
• Authentic Sources

Common Mistakes to Avoid when Quoting Sources

Even knowing how to quote sources effectively, it’s easy to make mistakes. Being aware of common pitfalls can help you avoid them. Here are some mistakes to watch out for:

1. Over-Quoting

Quoting should enhance your work, not dominate it. Avoid the temptation to fill your paper with lengthy quotes. Instead, use quotes selectively to support your arguments or provide evidence.

2. Improper Citation

Only accurate or consistent citations can lead to clarity and allegations of plagiarism. Make sure your in-text citations and reference list entries match the citation style required (e.g., Harvard, APA, MLA) and follow the prescribed format.

3. Lack of Context

Quotes should never stand alone; they should fit seamlessly into your narrative. Provide context by introducing the quote, explaining its relevance, and connecting it to your main argument.

4. Not Verifying Quotes

Refrain from relying on secondary sources that misquote or take original quotes out of context can lead to inaccuracies. Always verify quotes fromprimary sources w henever possible.

5. Overlooking Proofreading

Typos, missing punctuation, or formatting errors can detract from the professionalism of your work. Proofread your quotes, citations, and the surrounding text carefully.

Best Practices for Quoting

To ensure your quoting is impeccable, consider these best practices:

• Always attribute quotes to their respective authors.
• Ensure that the quotes you select are relevant and enhance your work’s context.
• Use quotes sparingly, with your voice and analysis dominating the text.
• Double-check the formatting style required by your institution or publication for consistency.
• Proofread to ensure accuracy in quotation marks, citations, and source details.

Online Tools and Resources For Quoting

Consider using online tools and resources to simplify the quoting process and ensure accuracy. Here are a few valuable options:

1. Citation Management Tools

• Zotero: A free, open-source tool that helps you collect, organise, cite, and share research materials.
• EndNote: A reference management program that offers advanced features for organising and citing sources..

2. Online Style Guides

• Purdue OWL: An online writing lab by Purdue University that provides extensive style guides for APA, MLA, Chicago, and more.
• CiteULike: A free service that helps you create and manage citations in various styles.
• Citation Machine: An easy-to-use tool for generating citations in APA, MLA, Chicago, and other styles.

3. Plagiarism Checkers

• Turnitin: A widely used plagiarism detection tool that helps you ensure the originality of your work.
• Grammarly: Besides grammar and spelling checks, Grammarly also offers a plagiarism checker for academic writing.

Integrating these tools and resources into your quoting process allows you to streamline your work and reduce the risk of errors in citations and quotations.

In conclusion, quoting sources is an integral part of academic and professional writing. Understanding the nuances of quoting, finding credible sources, and citing them correctly will elevate the quality of your work. Always prioritise accuracy, attribution, and context when incorporating quotes into your writing.

By following the guidelines and examples provided in this comprehensive guide, you’ll master quoting and enhancing the credibility of your research, essays, and papers. Remember that quoting is not just about using someone else’s words; it’s about building upon the knowledge of others while giving credit where it’s due.

Frequently Asked Questions

How to quote sources in a research paper.

To quote sources in a research paper, use double quotation marks, include an in-text citation with the author’s name and publication year, and integrate the quote smoothly into your text.

How to Cite a Quote?

To cite a quote, provide an in-text citation with the author’s name, publication year, and page number (if applicable), and include a full citation in your reference list following the required citation style.

What Are the Key Differences Between Primary and Secondary Sources in Quoting?

In the context of quoting, primary sources are firsthand accounts or original works, while secondary sources interpret or analyze primary sources. Explain the significance of these distinctions and their impact on effective quoting practices.

You May Also Like

Scholarly sources, also known as academic sources, refer to materials created to meet the standards and expectations of the academic community.

Information literacy is more than just the ability to find information; it encompasses the skills to recognise when information is needed and the competence to locate, evaluate, use, and ethically disseminate it.

The CRAAP Test is an acronym used as a checklist to help individuals evaluate the credibility and relevance of sources, especially in academic or research contexts. CRAAP stands for Currency, Relevance, Authority, Accuracy, and Purpose. Each of these criteria can help a researcher determine if a source is trustworthy and suitable for their needs.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Perspect Med Educ
• v.8(6); 2019 Dec

Beyond the default colon: Effective use of quotes in qualitative research

Lorelei lingard.

Centre for Education Research & Innovation and Department of Medicine, Health Sciences Addition, Schulich School of Medicine & Dentistry, Western University, London, Canada

In the Writer’s Craft section we offer simple tips to improve your writing in one of three areas: Energy, Clarity and Persuasiveness. Each entry focuses on a key writing feature or strategy, illustrates how it commonly goes wrong, teaches the grammatical underpinnings necessary to understand it and offers suggestions to wield it effectively. We encourage readers to share comments on or suggestions for this section on Twitter, using the hashtag: #how’syourwriting?

Last week the ‘e’ key died on my laptop. It’s a first-world problem, I’ll admit, but it really threw my writing for a loop—a lot of words require an ‘e’ key. Reflecting on what other keys I could not do without, I made a quick shortlist: comma, ‘ly’ and colon. The comma because its absence would consign me to the sort of breathy, adolescent writing that fills social media. The ‘ly’ because without that duo I can’t make most of the adverbs that prop up my first drafts. And the colon because I’m a qualitative researcher. How would I introduce quotes if the colon key were out of order?

I’m only partly joking. Every qualitative researcher confronts the challenge of selecting the right quotes and integrating them effectively into their manuscripts. As writers, we are all guilty of resorting to the default colon as an easy way to tuck quotes into our sentences; as readers, we have all suffered through papers that read like a laundry list of quotes rather than a story about what the writer learned. This Writer’s Craft instalment offers suggestions to help you choose the right quotes and integrate them with coherence and style, following the principles of authenticity and argument.

Authenticity

At the point of manuscript writing, a qualitative researcher is swimming in a sea of data. Innumerable transcript excerpts have been copied and pasted into data analysis software or (for the more tactile among us) onto multi-coloured sticky notes. Some of these excerpts we like very much. However, very few of them will make it into the final manuscript, particularly if we are writing for publication in a health research or medical education journal, with their 3000–4000 word limits.

Selecting the best quotes from among these cherished excerpts is harder than it looks. We should be guided by the principle of authenticity: does the quote offer readers first hand access to dominant patterns in the data? There are three parts to selecting a good, authentic quote: the quote is illustrative of the point the writer is making about the data, it is reasonably succinct, and it is representative of the patterns in data. Consider this quote, introduced with a short phrase to orient the reader:

Rather than feeling they were changing identities as they went through their training, medical students described the experience of accumulating and reconciling multiple identities: ‘the “life me”, who I was when I started this, is still here, but now there’s also, like, a “scientific me” as well as a sort of “doctor me”. And I’m trying to be all of that’ (S15) .

This quote is illustrative, providing an explicit example of the point that student identity is multiplying as training unfolds. It is succinct, expressing efficiently what other participants took pages to describe. And it is representative, remaining faithful to the overall sentiments of the many participants reporting this idea.

We have all read—and written!—drafts in which the quoted material does not reflect these characteristics. The remainder of this section addresses these recurring problems.

Is the quote illustrative?

A common challenge is the quote that illustrates the writer’s point implicitly, but not explicitly. Consider this example:

Medical students are undergoing a process of identity-negotiation: we’re ‘learning so much all the time, and some of it is the science stuff and some of it is professional or, like, practical ethical things, and we have to figure all that out’ (S2).

For this quote to serve as evidence for the point of identity-negotiation, the reader must infer that ‘figure all that out’ is a reference to this process. But readers may read their own meaning into decontextualized transcript extracts. Explicit is better, even if it sacrifices succinctness. In fact, this is the right quote, but we had trimmed away the first three sentences where ‘figuring out identity’ got explicit mention. The quote could be lengthened to include these sentences, or, to preserve succinctness, just that quoted phrase can be inserted into the introduction to the quote:

Medical students are ‘figuring out identity’, a process of negotiation in which they are ‘learning so much all the time, and some of it is the science stuff and some of it is professional or, like, practical ethical things, and we have to figure all that out’ (S2).

Is the quote succinct?

Interview transcripts are characterized by meandering and elliptical or incomplete speech. Therefore, you can search diligently and still come up with a 200-word quote to illustrate your 10-word point. Sometimes the long quote is perfect and you should include it. Often, however, you need to tighten it up. By including succinctness as part of the authenticity principle, my aim is to remind writers to explicitly consider whether their tightening up retains the gist of the quote.

The previous example illustrates one tightening technique: extract key phrases and integrate them into your own, introductory sentence to the quote. Another solution is to use the ellipsis to signal that you have cut part of the quote out:

Identity formation in the clinical environment is also influenced by materials and tools, ‘all this stuff you’ve never used before … you don’t know where it is or how to use it, and don’t even get me started on the computerized record. … So many hours and I’m still confused, am I ever going to know where to enter things?’ (S7) .

The first ellipsis signals that something mid-sentence has been removed. In this case, this missing material was an elaboration of ‘all this stuff’ that mentioned other details not relevant to the point being made. The second ellipsis follows a period, and therefore signals that at least one sentence has been removed and perhaps more. When using an ellipsis, only remove material that is irrelevant to the meaning of the quote, not relevant material that importantly nuances the meaning of the quote. The goal is not a bricolage which cuts and pastes tiny bits so that participants say what you want them to; it is a succinct-enough representation that remains faithful to the participant’s intended meaning.

Changing the wording of a quotation always risks violating the authenticity principle, so writers must do it thoughtfully. Two other situations, however, may call for this approach: to maintain the grammatical integrity of your sentence and to tidy up oral speech 1 . The first is usually not problematic, particularly if you are altering for consistent tense or for agreement of verb and subject or pronoun and antecedent, or replacing a pronoun with its referent. Square brackets signal such changes:

Participants from the community hospital setting, however, ‘[challenged] the assumption of anonymity when evaluating teachers’. (verb tense changed from present to past)

The second situation can be trickier: when should you tidy up the messiness of conversational discourse? Interview transcripts are replete with what linguists refer to as ‘fillers’ or ‘hesitation markers’, sounds and words such as ‘ah/uh/um/like/you know/right’ [ 1 ]. There is general agreement among qualitative scholars that quotes should be presented verbatim as much as possible, and those engaged in discourse and narrative analysis will necessarily analyze such hesitations as part of the meaning. In other applied social research methodologies, however, writers might do some ‘light tidying up’ both for readability and for ethical reasons, as long as they do not undermine authenticity in doing so [ 2 ]. Ethical issues include the desire not to do a disservice to participants by representing the um’s and ah’s of their natural speech, and the concern to protect participant anonymity by removing identifiable linguistic features such as regional or accented speech.

Finally, an emerging strategy for succinctness is to put the quotes into a table. Many qualitative researchers resent the constraints of the table format as an incursion from the quantitative realm. However, used thoughtfully, it can offer a means of presenting complex results efficiently. In this example, Goldszmidt et al. name, define and illustrate five main types of supervisor interruptions that they observed during their study of case review on internal medicine teaching teams (Tab.  1 ; [ 3 ]).

Types of supervisors’ interruptions during patient case review presentations, London Health Sciences Centre, University Hospital, Ontario, Canada 2010

AM  indicates morning case presentation; PM  overnight case presentation; A  attending physician; SR  senior resident; IM1  first-year internal medicine resident; FM1  first-year family medicine resident; CC  clinical clerk

This is a nice example of how ‘Tab.  1 ’, conventionally used in quantitative research papers for demographic details of the research sample, can be re-conceptualized to feature the key findings from a qualitative analysis. Tables should be supplemented, however, with narrative explanation in which the writer contextualizes and interprets the quoted material. More on this in the section on Argument.

Is the quote representative?

We have all been tempted to include the highly provocative quote (that thing we cannot believe someone said on tape), only to realize by the third draft that it misrepresents the data and must be relinquished. Quote selection should reflect strong patterns in the data; while discrepant examples serve an important purpose, their use should be purposeful and explicit. Your quote selection should also be distributed across participants, in order that you represent the data set. This may mean using the second- or third-best example rather than continuing to quote the same one or two highly articulate individuals.

You must provide sufficient context that readers can accurately infer the meaning of the quote. Sometimes this means including the interviewer’s question as well as the participant’s answer. In focus group research, where the emphasis is on the group discussion, it might be necessary to quote an exchange among participants rather than extracting individual comments. This example illustrates this technique:

Interviewer: And, in your experience, how do the students respond to your feedback about how well they communicated? SP1: Oh, really well, it’s really important to the students, they listen to what we say about their performance— Interruption with overlapping talk SP4: Well, yeah, on a good day maybe, sure. But not every time. Lots of sessions I feel like we’re probably more like props to them, so how well we think they did, I’m not sure that matters. SP3: Don’t you find it depends on the student? (FG2)

Of course, such a long excerpt threatens the goal of succinctness. Alternatively, you could use multiple quotes from this excerpt in a single sentence of your own:

Some standardized patients in the group believed that their assessor role was ‘really important to the students, they listen to what we say about their performance’, while others argued that ‘we’re probably more like props to them, so how well we think they did, I’m not sure that matters’. (FG2)

Sometimes a quote is representative but also, therefore, identifiable, jeopardizing confidentiality:

One participant explained that, ‘as chair of the competency committee, I prioritize how we spend our time. So that we can pay sufficient attention to this 2nd year resident. She’s supposed to be back from maternity leave but she had complications so her rotations need some altering for her to manage.’ (CCC4, P2)

In this case, the convention of using a legend (Clinical Competency Committee 4, participant 2) to attribute the quote may be insufficient to protect anonymity. If the study involves few programs and the methods identify them (e.g., Paediatrics and Medicine) and name the institution (e.g., Western University), the speaker may be identifiable to some readers, as may the resident.

Quoted material does not stand on its own: we must incorporate it into our texts, both grammatically and rhetorically. Grammatical incorporation is relatively straightforward, with one main rule to keep in mind: quoted material is subject to the same sentence-level conventions for grammar and punctuation as non-quoted material. Read this example aloud:

Arts and humanities teaching offers an opportunity for faculty to connect with medical students on a different level, ‘we can share how we feel about the work of caring, what it costs us, how it rewards us, as human beings’ (F9).

Your ear likely hears that this should be two sentences. But quotation marks seem to distract us from this, and we create a run-on sentence by putting a comma between the sentences. An easy correction is to replace the comma with a colon.

Arts and humanities teaching offers an opportunity for faculty to connect with medical students on a different level: ‘we can share how we feel about the work of caring, what it costs us, how it rewards us, as human beings’ (F9).

Many writers rely on the colon as their default mechanism for integrating quoted material. However, while it is often grammatically accurate, it is not always rhetorically sufficient. That is, the colon doesn’t contextualize, it doesn’t interpret. Instead, it ‘drops’ the quote in and leaves the reader to infer how the quoted material illustrates or advances the argument. This is problematic because it does not fulfil the requirement for adequacy of interpretation in presenting qualitative results. As Morrow argues, writers should aim for a balance of their interpretations and supporting quotations: ‘an overemphasis on the researcher’s interpretations at the cost of participant quotes will leave the reader in doubt as to just where the interpretations came from; an excess of quotes will cause the reader to become lost in the morass of stories’ [ 4 ]. (p. 256).

There are many techniques for achieving this balance between researcher interpretations and supporting quotations. Some techniques retain the default colon but attend carefully to the material that precedes it. Consider the following examples:

One clinician said: ‘Entrustment isn’t a decision, it’s a relationship’. (F21) One clinician argued: ‘Entrustment isn’t a decision, it’s a relationship’. (F21) One clinician in the focus group disagreed with the idea that entrustment was about deciding trainee progress: ‘Entrustment isn’t a decision, it’s a relationship’. (F21) Focus group participants debated the meaning of entrustment. Many described it matter-of-factly as ‘the process we use to decide whether the trainee should progress’, while a few argued that ‘entrustment isn’t a decision, it’s a relationship’. (F21)

These examples offer progressively more contextualization for the quote. The first example simply drops the quote in following the nondescript verb, ‘said’, offering no interpretive gloss and therefore exerting minimal rhetorical control over the reader. The second offers some context via the verb ‘argued’, which interprets the participant’s positioning or tone. The third interprets the meaning of the quote even more by situating it in the context of a focus group debate. And the fourth eschews the default colon entirely, integrating two quotes into the narrative structure of the author’s sentence to illustrate the dominant and the discrepant positions on entrustment in this focus group debate.

Integrating quotes into the narrative structure of your sentence, like the last example, offers two advantages to the writer. First, it interprets the quote for the reader and therefore exerts strong rhetorical control over the quote’s meaning. Second, it offers variety and style. If your goal is compelling prose, variety and style should not be underestimated. We have all had the experience of reading Results sections that proceed robotically: point-colon-quote, point-colon-quote, point-colon-quote …. If only to make the reader’s experience more enjoyable, your revision process should involve converting some of these to integrated narration.

Notwithstanding the goal of succinctness, sometimes you will include a longer quote because it beautifully illustrates the point. However, a long quote may offer opportunities for readers to focus on images or phrases other than those you intended, therefore creating incoherence in the argument you are making about your results. To guard against this, you might try the ‘quotation sandwich’ technique [ 5 ] of both an introductory phrase that sets up the context of the quote and a summary statement following it emphasizing why you consider it important and what you are using it to illustrate.

Finally, how many quotes do you need to support your point? More is not necessarily better. One quote should be sufficient to illustrate your point. Some points in your argument may not require a quoted excerpt at all. Consider this example, in which the first sentence presents a finding that is not illustrated with a quotation:

Residents described themselves as being always tired. However, their perceptions of the impact of their fatigue varied, from ‘not a factor in the care I provide’ (R8) to ‘absolutely killing me … I’m falling asleep at the bedside’ (R15).

The finding that residents are always tired does not require illustration. It is readily understandable and will not surprise anyone; therefore, following it with the quote ‘I’m tired all the time’ (R2) will feel redundant. The second part of the finding, however, benefits from illustration to show the variety of perception regarding impact.

If you do use multiple quotes to illustrate a point in your argument, then you must establish the relations between them for the reader. You can do this between the quoted excerpts or after them, as modelled above with the four examples used to illustrate progressively stronger quote contextualization.

In conclusion, quotes can be the life’s blood of your qualitative research paper. However, they are the evidence, not the argument. They do not speak for themselves and readers cannot infer what you intend them to illustrate. The authenticity principle can help you select a quote that is illustrative, succinct and representative, while the argument principle can remind you to attend to the grammatical and the rhetorical aspects of integrating the quote into the story you are telling about your research.

1 A third situation is beyond the scope of this piece: translating quoted material from another language into English. For careful consideration of this issue, please see Helmich et al. [ 6 ].

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Happiness Hub Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• Happiness Hub
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• Technical Writing

How to Lead Into a Quote

Last Updated: January 11, 2023 Fact Checked

This article was co-authored by Lynn Kirkham . Lynn Kirkham is a Professional Public Speaker and Founder of Yes You Can Speak, a San Francisco Bay Area-based public speaking educational business empowering thousands of professionals to take command of whatever stage they've been given - from job interviews, boardroom talks to TEDx and large conference platforms. Lynn was chosen as the official TEDx Berkeley speaker coach for the last four years and has worked with executives at Google, Facebook, Intuit, Genentech, Intel, VMware, and others. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 83,671 times.

Introducing a quote in a paper can be tricky, as you want the quote to feel seamless and relevant to your topic. You may want to use a quote from a literary text to support your ideas in an essay, or as evidence in your research paper. The key to using quotes effectively is to always use a lead-in or introduction to the quote. Try using an introductory phrase or verb to lead into the quote. You can also use your own assertions to introduce the quote in the text.

Leading With an Introductory Phrase or Verb

• According to Smith, “Life is beautiful.”
• In Smith's view, “Life is beautiful.”
• In Smith's words, “Life is beautiful.”

• Do not use “says” as a descriptive verb to introduce a quote, unless you are quoting from an interview.
• Arendt remarks, “Even in the darkest of times, we have the right to expect some illumination.”
• Arendt states, “Even in the darkest of times, we have the right to expect some illumination.”

• Arendt points out that “totalitarianism is to be feared.”
• Arendt emphasizes that “totalitarianism is to be feared.”
• Arendt describes her book as “an exploration of power.”

Leading with Your Own Assertion

• For example, you may write an assertion like, “Arendt does not see totalitarianism as a positive result of war.”
• Or you may write an assertion like, “Hamlet argues against Rosencrantz's claim that he lacks ambition.”

• Arendt does not see totalitarianism as a positive result of war: “Totalitarianism is to be feared and loathed.”
• Hamlet argues against Rosencrantz's claim that he lacks ambition: "I could be bounded in a nutshell and count myself a king of infinite space.”

• For Arendt, state sanctioned propaganda was essential totalitarian regimes, where “one could make people believe the most fantastic statements,” thereby confirming the state's power over its citizens.
• Hamlet is doubtful of Rosencrantz's view, claiming he could be “bounded in a nutshell” and still feel powerful, “a king of infinite space.”

Polishing the Lead-In

• You can also look at your use of quotes throughout the paper to confirm they flow well. Make sure you are consistent with how you introduce quotes in the paper. Use one to two different ways to introduce quotes and stick to them so the reader can follow your train of thought.

• You should also check that you italicize any titles in the lead-in. Capitalize any author names or titles in the lead-in, as well.

• Place the citation at the end of the quote, if you are using in quote citations.
• Arendt does not see totalitarianism as a positive result of war: “Totalitarianism is to be feared and loathed” ( On Totalitarianism , 54).
• Hamlet is doubtful of Rosencrantz's view, claiming he could be “bounded in a nutshell” and still feel powerful, “a king of infinite space” ( Hamlet , 2.2).

Community Q&A

You Might Also Like

• ↑ https://www.ccis.edu/offices/academicresources/writingcenter/essaywritingassistance/suggestedwaystointroducequotations.aspx
• ↑ http://writingcenter.unc.edu/handouts/quotations/
• ↑ https://writing.wisc.edu/handbook/assignments/quoliterature/
• ↑ https://www.albright.edu/wp-content/uploads/2020/11/Adding-Lead-Ins-Before-a-Quote.pdf
• ↑ https://owl.purdue.edu/owl/research_and_citation/using_research/quoting_paraphrasing_and_summarizing/signal_and_lead_in_phrases.html

About This Article

• Send fan mail to authors

Reader Success Stories

Did this article help you?

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Get all the best how-tos!

Sign up for wikiHow's weekly email newsletter

• Discoveries
• Right Journal
• Journal Metrics
• Journal Fit
• Abbreviation
• In-Text Citations
• Bibliographies
• Writing an Article
• Peer Review Types
• Acknowledgements
• Withdrawing a Paper
• Form Letter
• ISO, ANSI, CFR
• Google Scholar
• Journal Manuscript Editing
• Research Manuscript Editing

Book Editing

• Manuscript Editing Services

Medical Editing

• Bioscience Editing
• Physical Science Editing
• PhD Thesis Editing Services
• PhD Editing
• Master’s Proofreading
• Bachelor’s Editing
• Dissertation Proofreading Services
• Best Dissertation Proofreaders
• Masters Dissertation Proofreading
• PhD Proofreaders
• Proofreading PhD Thesis Price
• Journal Article Editing
• Book Editing Service
• Editing and Proofreading Services
• Research Paper Editing
• Medical Manuscript Editing
• Academic Editing
• Social Sciences Editing
• Academic Proofreading
• PhD Theses Editing
• Dissertation Proofreading
• Proofreading Rates UK
• Medical Proofreading
• PhD Proofreading Services UK
• Academic Proofreading Services UK

Medical Editing Services

• Life Science Editing
• Biomedical Editing
• Environmental Science Editing
• Pharmaceutical Science Editing
• Economics Editing
• Psychology Editing
• Sociology Editing
• Archaeology Editing
• History Paper Editing
• Anthropology Editing
• Law Paper Editing
• Engineering Paper Editing
• Technical Paper Editing
• Philosophy Editing
• PhD Dissertation Proofreading
• Lektorat Englisch
• Akademisches Lektorat
• Lektorat Englisch Preise
• Wissenschaftliches Lektorat
• Lektorat Doktorarbeit

PhD Thesis Editing

• Thesis Proofreading Services
• PhD Thesis Proofreading
• Proofreading Thesis Cost
• Proofreading Thesis
• Thesis Editing Services
• Professional Thesis Editing
• Thesis Editing Cost
• Proofreading Dissertation
• Dissertation Proofreading Cost
• Dissertation Proofreader
• Correção de Artigos Científicos
• Correção de Trabalhos Academicos
• Serviços de Correção de Inglês
• Correção de Dissertação
• Correção de Textos Precos
• 定額 ネイティブチェック
• Copy Editing
• FREE Courses
• Revision en Ingles
• Revision de Textos en Ingles
• Revision de Tesis
• Revision Medica en Ingles
• Revision de Tesis Precio
• Revisão de Artigos Científicos
• Revisão de Trabalhos Academicos
• Serviços de Revisão de Inglês
• Revisão de Dissertação
• Revisão de Textos Precos
• Corrección de Textos en Ingles
• Corrección de Tesis
• Corrección de Tesis Precio
• Corrección Medica en Ingles
• Corrector ingles

Select Page

How To Use Direct Quotations In Research Papers

Posted by Rene Tetzner | Apr 15, 2021 | Referencing & Bibliographies | 0 |

How To Use Direct Quotations In Research Papers When an author directly quotes sources in scholarly writing, it is essential to enclose each quotation within quotation marks or set it off as a block quotation, and also to maintain appropriate and correct patterns of punctuation in every sentence that includes a quotation. Only if the quotations you use are properly punctuated will they be successfully integrated into your text and succeed in supporting your argument as you intend.

The punctuation that precedes a quotation is particularly important because such introductory punctuation helps determine the way in which readers approach and read that quotation within a piece of academic or scientific writing. In some cases, no punctuation at all is needed immediately before a quotation, whether it is embedded in your main text or set off as a block quotation, but this is only so if no punctuation would be required were the entire sentence constructed of your own words. My next sentence provides a simple example. Smith and Jones conducted a similar trial and ‘discovered that over half of the participants could not complete the four tasks.’

In other cases, nothing more than the full stop closing the preceding sentence is required before a quotation, whether embedded or block, if the logic of the quotation naturally follows that of the preceding sentence and can start (or already is) a sentence of its own. My next two sentences demonstrate how this works in running prose, but the second sentence could easily be displayed as a block quotation, especially if it were longer. Thompson read the manuscript very carefully and discovered clear evidence of several early readers. ‘Marginal notes in three different hands appear on most pages, while an earlier hand corrected the text and a later one added drawings that are themselves a commentary on the treatise.’

Often a comma is the correct punctuation to introduce a quotation, as is the case in the following sentence. In an early study of the effects of chemotherapy, ‘patients were shown to recover much more quickly and with fewer negative side effects when they did not receive chemotherapy as part of their treatment.’ Again, if the quotation is long, it can be formatted as a block quotation using the exact same punctuation. Commas are also used to present dialogue effectively, and are therefore common when reporting and discussing interviews: ‘Are you sure,’ the researcher repeated, ‘that you didn’t see anything else before the bridge collapsed?’

In many cases, however, and especially in formal English, a colon is more appropriate than a comma. A colon is often used to introduce scholarly quotations, and it is a good choice when more than one sentence or passage is quoted or when emphasis is required. A colon also tends to clarify sentence structure as well as the line between your own text and quoted passages, so it can improve the clarity and legibility of a complex text. My next sentence provides an example. Question 4 was designed to help us refine our understanding of any limitations perceived by the participants: ‘Was there any task the domestic robot was not able to accomplish due to its size?’ A colon is especially well suited to introducing block quotations, with the colon coming at the end of your own running text and the block quotation following on a new line.

You might be interested in Services offered by Proof-Reading-Service.com

Journal editing.

Journal article editing services

PhD thesis editing services

Scientific Editing

Manuscript editing.

Manuscript editing services

Expert Editing

Expert editing for all papers

Research Editing

Research paper editing services

Professional book editing services

Related Posts

How To Cite ISO, ANSI, CFR & Other Industry Standards & Guidelines

September 12, 2021

How To Write an Annotated Bibliography

August 3, 2021

Abbreviating References to Specific Pages in Source Texts

August 1, 2021

How To Cite a Research Paper & Provide a Bibliographical Reference

July 29, 2021

Our Recent Posts

Our review ratings

• Examples of Research Paper Topics in Different Study Areas Score: 98%
• Dealing with Language Problems – Journal Editor’s Feedback Score: 95%
• Making Good Use of a Professional Proofreader Score: 92%
• How To Format Your Journal Paper Using Published Articles Score: 95%
• Journal Rejection as Inspiration for a New Perspective Score: 95%

Explore our Categories

• Abbreviation in Academic Writing (4)
• Career Advice for Academics (5)
• Dealing with Paper Rejection (11)
• Grammar in Academic Writing (5)
• Help with Peer Review (7)
• How To Get Published (146)
• Paper Writing Advice (17)
• Referencing & Bibliographies (16)

popular searches

• Request Info

Suggested Ways to Introduce Quotations

When you quote another writer's words, it's best to introduce or contextualize the quote. 

How To Quote In An Essay?

To introduce a quote in an essay, don't forget to include author's last name and page number (MLA) or author, date, and page number (APA) in your citation. Shown below are some possible ways to introduce quotations. The examples use MLA format.

Use A Full Sentence Followed by A Colon To Introduce A Quotation

• The setting emphasizes deception: "Nothing is as it appears" (Smith 1).
• Piercy ends the poem on an ironic note: "To every woman a happy ending" (25).

Begin A Sentence with Your Own Words, Then Complete It with Quoted Words

Note that in the second example below, a slash with a space on either side ( / ) marks a line break in the original poem.

• Hamlet's task is to avenge a "foul and most unnatural murder" (Shakespeare 925).
• The speaker is mystified by her sleeping baby, whose "moth-breath / flickers among the flat pink roses" (Plath 17).

Use An Introductory Phrase Naming The Source, Followed By A Comma to Quote A Critic or Researcher

Note that the first letter after the quotation marks should be upper case. According to MLA guidelines, if you change the case of a letter from the original, you must indicate this with brackets. APA format doesn't require brackets.

• According to Smith, "[W]riting is fun" (215).
• In Smith's words, " . . .
• In Smith's view, " . . .

Use A Descriptive Verb, Followed by A Comma To Introduce A Critic's Words

Avoid using says unless the words were originally spoken aloud, for instance, during an interview.

• Smith states, "This book is terrific" (102).
• Smith remarks, " . . .
• Smith writes, " . . .
• Smith notes, " . . .
• Smith comments, " . . .
• Smith observes, " . . .
• Smith concludes, " . . .
• Smith reports, " . . .
• Smith maintains, " . . .
• Smith adds, " . . .

Don't Follow It with A Comma If Your Lead into The Quotation Ends in That or As

The first letter of the quotation should be lower case.

• Smith points out that "millions of students would like to burn this book" (53).
• Smith emphasizes that " . . .
• Smith interprets the hand washing in MacBeth as "an attempt at absolution" (106).
• Smith describes the novel as "a celebration of human experience" (233).

Other Writing Resources

Enhance your academic writing skills by exploring our additional writing resources that will help you craft compelling essays, research papers, and more.

Your New Chapter Starts Wherever You Are

The support you need and education you deserve, no matter where life leads.

because a future built by you is a future built for you.

Too many people have been made to feel that higher education isn’t a place for them— that it is someone else’s dream. But we change all that. With individualized attention and ongoing support, we help you write a new story for the future where you play the starring role.

Who is JD Vance? What to know about Donald Trump's VP pick

Former President Donald Trump  tapped J.D. Vance  to be his running mate Monday at the Republican National Convention, catapulting the Ohio GOP senator even more into the national spotlight.

Here’s what you need to know about Vance:

More: Trump made MAGA happen. JD Vance represents those who will inherit it

Where is JD Vance from?

Vance grew up in Jackson, Kentucky and Middletown, Ohio. He described a childhood consumed by poverty and abuse in his best-selling 2016 memoir , "Hillbilly Elegy." Vance's mother struggled with drug addiction, so he spent many of his formative years with his grandmother – known to him as Mamaw.

How old is JD Vance?

Vance is 39. If elected, he would be the youngest vice president since Richard Nixon. His birthday is Aug. 2, 1984.

More: Vice presidential contender has multiple ties to Columbus

Did JD Vance serve in the military?

Vance joined the Marines Corps after high school and served as a public affairs marine in Iraq.

Is JD Vance married?

Vance's wife, Usha Vance, is a litigator for a law firm based in San Francisco and Washington, D.C. The pair met as students at Yale Law School and got married in 2014, one year after they graduated.

The couple has three young children: Ewan, Vivek and Mirabel.

Where does JD Vance live?

Vance and his family live in the East Walnut Hills neighborhood of Cincinnati. The senator also bought a $1.5 million home in Alexandria, Virginia, last year, Politico reported .

How long has JD Vance been in politics?

Vance was first elected to the U.S. Senate in 2022 after defeating former Democratic Rep. Tim Ryan for an open seat in Ohio.

What’s the history between Vance and Trump?

Vance openly criticized Trump in 2016 as pundits used his memoir to explain the former president's popularity with white, rural voters. He previously suggested Trump could be "America’s Hitler," called him noxious and compared him to an opioid.

But Vance changed his tune as he geared up for his 2022 Senate run, deleting controversial tweets and crediting Trump for the work he did in office. He secured Trump's endorsement in a chaotic Republican Senate primary and is now one of the former president's most loyal allies.

JD Vance didn't vote for Donald Trump in 2016

In one NPR interview , he joked that he would rather write his dog on the ballot than vote for Trump or Hillary Clinton.

"I think that I'm going to vote third party because I can't stomach Trump," the "Hillbilly Elegy" author said at the time. "I think that he's noxious and is leading the white working class to a very dark place."

What are Vance's policy positions?

Vance personifies what's known as the New Right , a populist conservatism that rejects many traditional Republican views. He supports tariffs on trade and opposes U.S. intervention in foreign conflicts, particularly the war between Russia and Ukraine. He's also spoken out against potential cuts to Social Security.

Who is JD Vance? Vice presidential candidate has multiple ties to Columbus

Some of Vance's work in the Senate has been bipartisan. He introduced a rail safety bill with Sen. Sherrod Brown after the train derailment in East Palestine, Ohio. He also worked with Massachusetts Sen. Elizabeth Warren on legislation to hold executives accountable for failed banks.

At the same time, many of his other bills reflect conservative views. For example, Vance introduced legislation to ban gender-affirming care for minors and a bill to eliminate diversity programs in the federal government.

Where does JD Vance stand on abortion?

Vance opposes abortion and often says the government should find ways to encourage people to have children.

Like other Republicans, however, Vance changed how he discusses the issue after Ohio and other states voted in favor of abortion access last year. In a December CNN interview , he said Republicans must "accept that people do not want blanket abortion bans."

More recently, he told Meet the Press that he supports access to the abortion drug mifepristone.

Haley BeMiller is a reporter for the USA TODAY Network Ohio Bureau, which serves the Columbus Dispatch, Cincinnati Enquirer, Akron Beacon Journal and 18 other affiliated news organizations across Ohio.

• Local Politics
• Editorials & Letters
• Northern Kentucky
• National Politics

What is 'Hillbilly Elegy'? Everything to know about VP candidate JD Vance's book

Former President Donald Trump selected Ohio Sen. J.D. Vance on Monday to be his 2024 vice-presidential running mate.

Vance, who grew up in Jackson, Kentucky, and Middletown, Ohio, skyrocketed to fame as the author of “Hillbilly Elegy.” The book later turned into a movie of the same name that was released in 2020.

Here's what to know about "Hillbilly Elegy."

Is JD Vance's 'Hillbilly Elegy' based on a true story? What is it about?

Yes. Vance described a childhood consumed by poverty and abuse in "Hillbilly Elegy," his  best-selling 2016 memoir . Vance's mother struggled with drug addiction, so he spent many of his formative years with his grandmother – known to him as Mamaw. The book, which has 4.3/5 stars out of over 96,000 ratings on Amazon, also touches on his journey to a Yale Law School degree that opened doors for him in Silicon Valley.

"Hillbilly Elegy" later turned into a  Netflix feature film of the same name.

What to know about 'Hillbilly Elegy,' the movie

The movie inspired by Vance's book released to Netflix in 2020. Directed by Ron Howard, it stars Amy Adams and Glenn Close. Vance's character is played by Gabriel Basso. Owen Asztalos also plays the younger version of him.

The IMDB description says, "An urgent phone call pulls a Yale Law student back to his Ohio hometown , where he reflects on three generations of family history and his own future."

The film, which is rated R, received a 6.7/10 on IMDB and 25% on Rotten Tomatoes .

Where was 'Hillbilly Elegy' filmed?

According to Decider , "Hillbilly Elegy" was partially filmed in Vance's hometown of Middletown, Ohio, as well as Atlanta and Clayton, Georgia.

Who is JD Vance's mother?

Vance's parents are Donald Bowman and Bev Vance. The two divorced when he was a toddler, according to Politico . In the movie, Bev Vance's character is played by Amy Adams.

Where can I watch 'Hillbilly Elegy'

The film is available to stream on Netflix.

Where is Middletown, Ohio?

Middletown is located in Ohio's Butler and Warren counties, the southwest portion of the state. It's part of the Greater Cincinnati area.

Who is JD Vance? Vice presidential candidate has multiple ties to Columbus

'Hillbilly Elegy' trailer

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Citing sources

How to Cite Sources | Citation Generator & Quick Guide

Citing your sources is essential in  academic writing . Whenever you quote or paraphrase a source (such as a book, article, or webpage), you have to include a  citation crediting the original author.

Failing to properly cite your sources counts as plagiarism , since you’re presenting someone else’s ideas as if they were your own.

The most commonly used citation styles are APA and MLA. The free Scribbr Citation Generator is the quickest way to cite sources in these styles. Simply enter the URL, DOI, or title, and we’ll generate an accurate, correctly formatted citation.

Generate accurate citations with Scribbr

Instantly correct all language mistakes in your text.

Upload your document to correct all your mistakes in minutes

Table of contents

When do you need to cite sources, which citation style should you use, in-text citations, reference lists and bibliographies.

Scribbr Citation Generator

Other useful citation tools

Citation examples and full guides, frequently asked questions about citing sources.

Citations are required in all types of academic texts. They are needed for several reasons:

• To avoid plagiarism by indicating when you’re taking information from another source
• To give proper credit to the author of that source
• To allow the reader to consult your sources for themselves

A citation is needed whenever you integrate a source into your writing. This usually means quoting or paraphrasing:

• To quote a source , copy a short piece of text word for word and put it inside quotation marks .
• To paraphrase a source , put the text into your own words. It’s important that the paraphrase is not too close to the original wording. You can use the paraphrasing tool if you don’t want to do this manually.

Citations are needed whether you quote or paraphrase, and whatever type of source you use. As well as citing scholarly sources like books and journal articles, don’t forget to include citations for any other sources you use for ideas, examples, or evidence. That includes websites, YouTube videos , and lectures .

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

Usually, your institution (or the journal you’re submitting to) will require you to follow a specific citation style, so check your guidelines or ask your instructor.

In some cases, you may have to choose a citation style for yourself. Make sure to pick one style and use it consistently:

• APA Style is widely used in the social sciences and beyond.
• MLA style is common in the humanities.
• Chicago notes and bibliography , common in the humanities
• Chicago author-date , used in the (social) sciences
• There are many other citation styles for different disciplines.

If in doubt, check with your instructor or read other papers from your field of study to see what style they follow.

In most styles, your citations consist of:

• Brief in-text citations at the relevant points in the text
• A reference list or bibliography containing full information on all the sources you’ve cited

In-text citations most commonly take the form of parenthetical citations featuring the last name of the source’s author and its year of publication (aka author-date citations).

An alternative to this type of in-text citation is the system used in numerical citation styles , where a number is inserted into the text, corresponding to an entry in a numbered reference list.

There are also note citation styles , where you place your citations in either footnotes or endnotes . Since they’re not embedded in the text itself, these citations can provide more detail and sometimes aren’t accompanied by a full reference list or bibliography.

A reference list (aka “Bibliography” or “Works Cited,” depending on the style) is where you provide full information on each of the sources you’ve cited in the text. It appears at the end of your paper, usually with a hanging indent applied to each entry.

The information included in reference entries is broadly similar, whatever citation style you’re using. For each source, you’ll typically include the:

• Author name
• Publication date
• Container (e.g., the book an essay was published in, the journal an article appeared in)
• Location (e.g., a URL or DOI , or sometimes a physical location)

The exact information included varies depending on the source type and the citation style. The order in which the information appears, and how you format it (e.g., capitalization, use of italics) also varies.

Most commonly, the entries in your reference list are alphabetized by author name. This allows the reader to easily find the relevant entry based on the author name in your in-text citation.

In numerical citation styles, the entries in your reference list are numbered, usually based on the order in which you cite them. The reader finds the right entry based on the number that appears in the text.

Scribbr Citation Checker New

The AI-powered Citation Checker helps you avoid common mistakes such as:

• Missing commas and periods
• Incorrect usage of “et al.”
• Ampersands (&) in narrative citations
• Missing reference entries

Because each style has many small differences regarding things like italicization, capitalization , and punctuation , it can be difficult to get every detail right. Using a citation generator can save you a lot of time and effort.

Scribbr offers citation generators for both APA and MLA style. Both are quick, easy to use, and 100% free, with no ads and no registration required.

Just input a URL or DOI or add the source details manually, and the generator will automatically produce an in-text citation and reference entry in the correct format. You can save your reference list as you go and download it when you’re done, and even add annotations for an annotated bibliography .

Once you’ve prepared your citations, you might still be unsure if they’re correct and if you’ve used them appropriately in your text. This is where Scribbr’s other citation tools and services may come in handy:

Plagiarism Checker

Citation Checker

Citation Editing

Plagiarism means passing off someone else’s words or ideas as your own. It’s a serious offense in academia. Universities use plagiarism checking software to scan your paper and identify any similarities to other texts.

When you’re dealing with a lot of sources, it’s easy to make mistakes that could constitute accidental plagiarism. For example, you might forget to add a citation after a quote, or paraphrase a source in a way that’s too close to the original text.

Using a plagiarism checker yourself before you submit your work can help you spot these mistakes before they get you in trouble. Based on the results, you can add any missing citations and rephrase your text where necessary.

Try out the Scribbr Plagiarism Checker for free, or check out our detailed comparison of the best plagiarism checkers available online.

Scribbr Plagiarism Checker

Scribbr’s Citation Checker is a unique AI-powered tool that automatically detects stylistic errors and inconsistencies in your in-text citations. It also suggests a correction for every mistake.

Currently available for APA Style, this is the fastest and easiest way to make sure you’ve formatted your citations correctly. You can try out the tool for free below.

If you need extra help with your reference list, we also offer a more in-depth Citation Editing Service.

Our experts cross-check your in-text citations and reference entries, make sure you’ve included the correct information for each source, and improve the formatting of your reference page.

If you want to handle your citations yourself, Scribbr’s free Knowledge Base provides clear, accurate guidance on every aspect of citation. You can see citation examples for a variety of common source types below:

And you can check out our comprehensive guides to the most popular citation styles:

At college level, you must properly cite your sources in all essays , research papers , and other academic texts (except exams and in-class exercises).

Add a citation whenever you quote , paraphrase , or summarize information or ideas from a source. You should also give full source details in a bibliography or reference list at the end of your text.

The exact format of your citations depends on which citation style you are instructed to use. The most common styles are APA , MLA , and Chicago .

The abbreviation “ et al. ” (Latin for “and others”) is used to shorten citations of sources with multiple authors.

“Et al.” is used in APA in-text citations of sources with 3+ authors, e.g. (Smith et al., 2019). It is not used in APA reference entries .

Use “et al.” for 3+ authors in MLA in-text citations and Works Cited entries.

Use “et al.” for 4+ authors in a Chicago in-text citation , and for 10+ authors in a Chicago bibliography entry.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .

APA format is widely used by professionals, researchers, and students in the social and behavioral sciences, including fields like education, psychology, and business.

Be sure to check the guidelines of your university or the journal you want to be published in to double-check which style you should be using.

MLA Style  is the second most used citation style (after APA ). It is mainly used by students and researchers in humanities fields such as literature, languages, and philosophy.

Is this article helpful?

Other students also liked.

• Citation Styles Guide | Examples for All Major Styles
• APA vs. MLA | The Key Differences in Format & Citation
• The Basics of In-Text Citation | APA & MLA Examples

More interesting articles

• Citation examples for common sources types
• Et Al. | Meaning & Use in APA, MLA & Chicago
• Hanging Indent | Word & Google Docs Instructions
• How to Cite a Book | APA, MLA, & Chicago Examples
• How to Cite a Journal Article | APA, MLA, & Chicago Examples
• How to Cite a Lecture | APA, MLA & Chicago Examples
• How to Cite a Newspaper Article | MLA, APA & Chicago
• How to Cite a Website | MLA, APA & Chicago Examples
• How to Cite a Wikipedia Article | APA, MLA & Chicago
• How to Cite a YouTube Video | MLA, APA & Chicago
• How to Cite an Image | Photographs, Figures, Diagrams
• How to Cite an Interview | APA, MLA & Chicago Style
• Parenthetical Citation | APA, MLA & Chicago Examples
• What Are Endnotes? | Guide with Examples
• What Are Footnotes? | Guide with Word Instructions
• What Does Ibid. Mean? | Definition & Examples
• What is a DOI? | Finding and Using Digital Object Identifiers
• What Is an Annotated Bibliography? | Examples & Format

Scribbr APA Citation Checker

An innovative new tool that checks your APA citations with AI software. Say goodbye to inaccurate citations!

Trump disavows Project 2025, but he has long-standing ties to some key architects

As President Joe Biden’s campaign seeks to rebound from his rough debate performance two weeks ago, it has increasingly tried to turn the attention to former President Donald Trump about Project 2025, an expansive conservative plan backed by more than 100 groups for Trump’s potential second administration.

Over the last week, Trump has tried to put some distance between himself and Project 2025.

"I know nothing about Project 2025," he said in a Truth Social post Friday. "I have no idea who is behind it.”

He doubled down in a social media post Thursday morning, saying, "I have not seen it, have no idea who is in charge of it, and, unlike our very well received Republican Platform, had nothing to do with it."

But many of Trump’s key allies have been directly involved in producing the project, which includes a 900-plus page policy road map and personnel database gathered by the Heritage Foundation, the conservative think tank leading the effort.

Trump also spoke highly about the group's plans at a dinner sponsored by the Heritage Foundation in April 2022, saying: “This is a great group, and they’re going to lay the groundwork and detail plans for exactly what our movement will do and what your movement will do when the American people give us a colossal mandate to save America.”

The project’s website bills it as a “governing agenda” that would “pave the way for an effective conservative Administration.”

The website also notes that the project is backed by over 100 conservative organizations , many led by close allies of Trump, including Turning Point USA, the Center for Renewing America, the Claremont Institute, the Family Policy Alliance, the Family Research Council, Moms for Liberty and America First Legal — the latter of which is led by Stephen Miller, a top former Trump adviser.

Former Trump administration officials who have been directly affiliated with Project 2025 include former Office of Management and Budget Director Russ Vought, former acting Defense Secretary Christopher Miller, former Housing and Urban Development Secretary Ben Carson, former deputy chief of staff Rick Dearborn and former Justice Department senior counsel Gene Hamilton.

Vought, one of the key authors of Project 2025, is also the Republican National Committee’s platform policy director.

The RNC this month adopted its official policy platform for the 2024 election cycle, a document that is less conservative than the Project 2025 handbook — including on key issues like abortion .

Despite the differences between the official platform and Project 2025, the Heritage Foundation is intertwined with the RNC and has been for years.

A spokesperson for the Heritage Foundation told NBC News that it will have a sponsored presence at the Republican National Convention in Milwaukee, as it did at the GOP conventions in 2016 and 2012.

The group was also intimately involved with Trump's transition to the White House in 2016. Beginning that August, top Heritage officials — including Ed Meese, Ed Feulner, Bill Walton and Kay Coles James — became key players in identifying personnel to fill out the administration. 

The Trump campaign declined to comment on who could be a part of a 2025 transition team. Typically, a party’s nominee selects a transition team several months before the general election.

In a statement to NBC News, Biden campaign spokesperson Sarafina Chitka called Project 2025 "extreme," and said it's, "written and led by [Trump's] own inner circle — the same extremists who stacked Trump’s first administration with loyalists and fired anyone who opposed his dangerous instincts, and the same enablers who will help Trump go even further to ‘terminate’ the Constitution, get ‘revenge’ on his enemies, and govern as a ‘dictator on day one’ if he wins this November. Donald Trump and Project 2025 are one in the same — and they’re both going to lose this November.”

Although the RNC’s official platform and Project 2025 differ, the goals espoused in Project 2025 are similar to some of the campaign promises Trump makes at his rallies.

He has promised to cut the Education Department, mirroring Project 2025’s proposal that “ the federal Department of Education should be eliminated .”

He has also promised to appoint a special prosecutor to investigate Biden, alleging that the justice system under the Biden administration is “two-tiered” and “weaponized.”

Project 2025’s handbook echoes th at , saying the Biden administration has executed an “unprecedented politicization and weaponization of the [Justice] department,” which demands “a comprehensive response from the next Administration.”

Still, Trump’s campaign denies that the authors of Project 2025 are in any way shaping his plans for a potential administration.

Senior campaign advisers Chris LaCivita and Susie Wiles said in a statement last year that “unless a message is coming directly from President Trump or an authorized member of his campaign team, no aspect of future presidential staffing or policy announcements should be deemed official.”

Vaughn Hillyard is a correspondent for NBC News. 

Alexandra Marquez is a politics reporter for NBC News.

After assassination attempt, Trump and Biden seek calm, unity

• Medium Text
• LATEST DEVELOPMENTS
• Biden orders review of how gunman got so close
• Gunman worked as a dietary aide at a nursing home
• Four-day convention gets under way on Monday
• Trump to name his vice presidential running mate

SUSPECT A NURSING HOME AIDE

SPECTATOR KILLED PROTECTING FAMILY

Sign up here.

Reporting by Nathan Layne, Gabriella Borter and Soren Larson in Bethel Park, Pennsylvania; Additional reporting by Katharine Jackson, Sarah N. Lynch, Richard Cowan, Caitlin Webber, Nandita Bose, Ismail Shakil, Joseph Ax, Andrew Hay and Kanishka Singh; Writing by Frank McGurty, Scott Malone and Michelle Nichols; Editing by Lisa Shumaker, Howard Goller and Lincoln Feast.

Our Standards: The Thomson Reuters Trust Principles. , opens new tab

Thomson Reuters

Washington-based correspondent covering campaigns and Congress. Previously posted in Rio de Janeiro, Sao Paulo and Santiago, Chile, and has reported extensively throughout Latin America. Co-winner of the 2021 Reuters Journalist of the Year Award in the business coverage category for a series on corruption and fraud in the oil industry. He was born in Massachusetts and graduated from Harvard College.

Helen Coster is a U.S. Presidential Election Correspondent at Reuters, where she writes a mix of spot news, enterprise and analysis stories, with a focus on the Republican Party and conservative media. Prior to 2024 she covered the media industry for Reuters, and was also a Senior Editor on Reuters’ Commentary team. A graduate of Princeton University, she has reported from six countries, including Pakistan, India, and Greece.

Ukraine and Czech producer to build ammunition factory in Ukraine

Ukraine's state company Ukroboronservice and Czech ammunition maker Sellier & Bellot plan to build an ammunition factory in Ukraine, Ukrainian Prime Minister Denys Shmyhal said on Tuesday after joint government meetings in Prague.